(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard

Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard

Click this image to zoom it.

Move the mouse over the image to zoom

  • Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard
  • Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard
  • Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard
  • Electric Enclosure Exterior Parts - Interlock Plug, Japanese Standard
  • Volume Discount

This is safety equipment mounted on safety doors and machines which prevents accidents caused by doors and machines being turned on carelessly. Standard Japanese manufactured products that are widely used by major automobile and steel manufacturers.


● This can be installed at an entrance door of a dangerous area, and is used with a setting that turns off power when a plug is removed
● 3-split type is made more secure by having the operator to carry one of the parts (see figure below)
        

· It cannot be used in a location where there is severe vibration or shock, or a significant amount of dust, mist or corrosive gas.
· Do not mount downward as there is a risk of dropout.
· Do not insert or remove while power is on other than in emergency. It may shorten the contact life.
· Take precautions in case the driving source is blocked by pulling out the plug. (such as an electromagnetic brake)
· Do not configure the emergency stop circuit only by using this product. The emergency stop state may be canceled simply by inserting the plug, causing danger.
· Mount in a position where water and oil do not reach.
· After the plug is disconnected, do not touch the charged portion of the socket.

Part Number

Configured Part Number is shown.

Specifications

1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image

Part Number Number of Circuits Number of Split Wire
for Hanging
SPT-11 1-Circuit 2-split Not Provided
SPT-11-H Included
MSPT-22 2-Circuit Not Provided
MNSP-4 1-Circuit 3-split

Sales: Misumi / Manufacturer: Daiwa Dengyo

More Information

1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image


1 Circuit, 2 Circuit 2 Split, 3 Split Interlock Plug:Related Image

Part Number Rating Insulation Resistance Maximum Voltage Contact
Resistance
Electrical
Life
Cycles or More
Place of
Use
Operating
Temperature
Range
Wiring
Terminals
Maximum
Mounting
Plate Thickness
Mass
approx. g
Between Charging Metal Part and
Non-Charging Metal Part
Between Same-Pole Terminals
in Open Circuit Condition
Between Charging Metal Part and
Non-Charging Metal Part
Between Same-Pole Terminals
in Open Circuit Condition
SPT-11 250 VAC 15A
(Min 24 V 5 mA)
100 MΩ or more
(500 VDC)
1500 50 MΩ
or less
5000 Indoor -5 ~
+60°C
2 x M4 6mm 210
SPT-11-H 215
MSPT-22 4 x M4 235
MNSP-4 600 VAC 30A
(Min 24 V 10mA)
100 MΩ or more
(1000 VDC)
2200 2000 2 x M4 4.5mm 570

Detailed Specification

Part Number
MNSP-4
MNSP-4L1
MSPT-22
MSPT-22-S14
SPT-11
SPT-11-H
SPT-11-S14
SPT-L3
Part NumberMinimum order quantityVolume DiscountDays to Ship Characteristics Material Paint Surface Processing Special Notes Number of Circuits Number of Splits Wire for Hanging Use
1 Piece(s)Available

8 Days or more

----1-Circuit3-splitN/AThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

8 Days or more

-Steel PlateUniclo (Trivalent Chromate) Plating----For MNSP-4 Cover
1 Piece(s)Available

8 Days or more

----2-Circuit2-splitN/AThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

8 Days or more

Stainless surface has no coating, so it will never peelStainless (without Surface Coating)N/ABasic specification is the same MSPT-222-Circuit2-splitN/AThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

Same day

Stock

----1-Circuit2-splitN/AThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

8 Days or more

----1-Circuit2-splitIncludedThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

8 Days or more

Stainless surface has no coating, so it will never peelStainless (without Surface Coating)N/ABasic specification is the same SPT-111-Circuit2-splitN/AThis can be installed at an entrance door of a dangerous area, and it is used with a setting that turns off all power when a plug is removed
1 Piece(s)Available

Same day

Stock

-Steel PlateUniclo (Trivalent Chromate) Plating----For SPT Cover

Loading...

  1. 1

Basic Information

Type Adapter

Additional Products in this Category

Complementary Products

Tech Support