(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Floating Connectors - Extra Short Foot Mount, Tapped (FJXLS10-1.25)
- Volume Discount
Floating joints that can be used where there is little distance between cylinders and moving objects.
- inCAD Components
Part Number
Configured Part Number is shown.
FJXLS10-1.25
・Materials
[ ! ] Material in ( ) is for Lateral, Angular Misalignment Type
| Type | Main Body / Cover | Connector | Spring | Washer | ||||||
| Lateral Misalignment | Lateral, Angular Misalignment | |||||||||
| Tapped | Tapped | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | [ M ]Material | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness |
| FJXL | FJCXL | 1045 Carbon Steel Equivalent | Black Oxide | 1045 Carbon Steel Equivalent | Black Oxide | 35~45HRC | 304 Stainless Steel-WPB | 304 Stainless Steel | Nitriding Treatment | 500HV~ |
| FJXLS | FJCXLS | 304 Stainless Steel | - | 420 Stainless Steel(Stainless Steel440C) | - | |||||
Specifications
| Part Number |
| FJXL5-0.8 |
■Floating Connectors - Extra Short Foot Mount - Tapped (for Threaded Cylinder)
[ ! ]Values in ( ) are for Stainless Steel.[ ! ]Floating Connectors for Air Cylinders
■Floating Connectors - Extra Short with Lateral and Angular Misalignment Compensation Type - Tapped (for Threaded Cylinder)
[ ! ]Floating Connectors for Air Cylinders
| Part Number | L1 | L2 | L3 | L4 | A | B | C | P | E | d | Allowable Misalignment U | St (Reference value) | Maximum Applied Tensile / Compression Force (N) | Mass (g) | Compliance with Standard | ||
| Type | M-Pitch | FJXL | FJXLS | ||||||||||||||
| Tapped Type FJXL FJXLS | 5-0.8 | 9 | 22 | 5 | 4.1 | 7 | 17(19) | 17 | 9 | 4 | 4.5 | 0.5 | 0.2 | 150 | 30(40) | ● | ● |
| 6-1.0 | 9 | 22 | 5 | 4.1 | 7 | 17(19) | 17 | 9 | 4 | 4.5 | 0.5 | 0.2 | 150 | 30(40) | ● | ● | |
| 8-1.25 | 11 | 28 | 6 | 5.2 | 10 | 22 | 22 | 11 | 5.5 | 5.5 | 0.5 | 0.2 | 1100 | 65 | ● | ● | |
| 10-1.25 | 13.5 | 32 | 7 | 6 | 12 | 26 | 25 | 14 | 6 | 6.6 | 0.5 | 0.2 | 2500 | 115 | ● | ● | |
| 14-1.5 | 18 | 40 | 8 | 7 | 17 | 35(36) | 32 | 20 | 8 | 9 | 0.75 | 0.2 | 6000 | 260(280) | ● | ● | |
| 18-1.5 | 20 | 50 | 9.5 | 8.5 | 22 | 44(45) | 40.5 | 26 | 10 | 11 | 1 | 0.2 | 11000 | 520(555) | ● | ● | |
■Floating Connectors - Extra Short with Lateral and Angular Misalignment Compensation Type - Tapped (for Threaded Cylinder)
| Part Number | L1 | L2 | L3 | L4 | A | B | C | P | E | d | Allowable Misalignment U | Allowable Angular Misalignment | St (Reference value) | Maximum Applied Tensile / Compression Force (N) | Mass (g) | Compliance with Standard | ||
| Type | M-Pitch | FJCXL | FJCXLS | |||||||||||||||
| Tapped Type FJCXL FJCXLS | 5-0.8 | 14.9 | 22.5 | 4.5 | 4 | 7 | 25 | 18 | 9 | 4 | 4.5 | 0.5 | 4 | 0.65 | 150 | 73 | ● | ● |
| 6-1.0 | 14.9 | 22.5 | 4.5 | 4 | 7 | 25 | 18 | 9 | 4 | 4.5 | 0.5 | 4 | 0.65 | 150 | 73 | ● | ● | |
| 8-1.25 | 17.1 | 27.5 | 5.5 | 5 | 10 | 28 | 22 | 11 | 5 | 5.5 | 0.5 | 4 | 0.95 | 1100 | 112 | ● | - | |
| 10-1.25 | 21.9 | 33.5 | 6.5 | 6 | 12 | 32 | 27 | 14 | 6 | 6.6 | 0.5 | 4 | 1.1 | 2500 | 176 | ● | ● | |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| FJXLS10-1.25 |
Loading...
More Information
Basic Information
| Type | Foot | Cylinder Used | Air pressure cylinders | Connection Type, Cylinder Side | Female Thread |
|---|---|---|---|---|---|
| Connection Type, Work Piece Side | Hole | Mount Type | Foot Mount | AWC Alteration (Flange Cut) | No |
Please check the type/dimensions/specifications of the part FJXLS10-1.25 in the Floating Connectors - Extra Short Foot Mount, Tapped series.
Specification/Dimensions
-
Allowable Angular Deviation (A°)(deg)
- ±4
-
type
- FJCXL
- FJCXLS
- FJXL
- FJXLS
-
Connecting Thread Nominal M(mm)
- M3 ~ M8
- M10 ~ M18
- M3 ~ M8
-
Connecting Thread Nominal p(mm)
- 0.5 to 0.8
- 1 to 1.75
- 0.5 to 0.8
-
Main Body Material
- Steel
- Stainless Steel
- Steel
-
Stud Material
- Steel
- Stainless Steel
- Steel
-
Allowable Eccentricity (U)(mm)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| FJCXL8-1.25 |
| FJCXLS10-1.25 |
| FJCXLS5-0.8 |
| FJXLS14-1.5 |
| FJXLS18-1.5 |
| FJXLS5-0.8 |
Additional Products in this Category
- Holders - Side Mount, Flange/Bar Type
- Floating Connectors - Bracket Mouning Type
- Floating Joints - Compact, Circular, Tapped
- Holders - L-Shaped Type
- Floating Joints - Mount Flange Set / Cylinder Connector
- Floating Joints - T-Slot Type, Through, Tapped
- Tip Connection Joints - Tapped
- Floating Joint, Light Weight Type For Light Load JC Series
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy