(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Plastic Plates - PEEK, Holes Optional
If finish-machined, these plate become more convenient.
- inCAD Components
Part Number
Configured Part Number is shown.
■Standard Type
■Pre-Drilled Type
■Pre-Drilled Type
・Materials
[ ! ]The material is not filled with glass fiber.
[ M ] Material: PEEK
| Type | [ M ]Grade | Color | Operating Ambient Temperature |
| PKA | Standard | Ash Brown | -50~250°C |
| PKAH | Sliding | Black | |
| PKCA | Electrical Conductivity | Black | Ambient Temp. ~ 250°C |
[ M ] Material: PEEK
Specifications
■Standard Type
■Pre-drilled Type
| | Part Number | - | A | - | B | - | T |
| Circular Sawing | PKA | - | 300 | - | 200 | - | 5 |
| Guaranteed Perpendicularity of Circular Sawing | PKANTQ | - | 200.5 | - | 100.5 | - | 10 |
| 4-Side Milling etc. | PKA4FN | - | 150.5 | - | 100.3 | - | 15 |
| 6-Surface Milling etc. | PKA6FMM | - | 100.3 | - | 90.5 | - | 10.5 |
| Upper-Lower Surface Milling etc. | PKA2FQ | - | 80 | - | 50 | - | 5 |
■Pre-drilled Type
| Part Number | - | A | - | B | - | T | - | F | - | G | - | Screw Nominal Dia. | - | L |
| PKA2H PKCA2H | - - | 50 150 | - - | 25 120 | - - | 8 10 | - - | F34 F80 | - - | G10 G60 | - - | N4 M8 | - | L8 |
■Standard Type
| Part Number | Dimension Range by Material | A | B | T | ||||||||||||
| Type | Finish Selection | T Dimension Tolerance | A, B Dimension Tolerance | |||||||||||||
| PKA PKAH PKCA | Standard Sliding Conductive | Circular Sawing | 1 mm Increment | Selection | ||||||||||||
| — | Not Available | Not Available | PKA | 20–500 | 20–400 | 1 | 2 | 3 | 5 | 8 | 10 | |||||
| 20–250 | 20–150 | 16 | 20 | 25 | ||||||||||||
| PKAH | 20–300 | 20–200 | 5 | 8 | 10 | |||||||||||
| PKCA | 10 | |||||||||||||||
| 20–250 | 20–150 | 16 | 20 | |||||||||||||
| Guaranteed Perpendicularity of Circular Sawing (NT) | 0.1 mm Increment | Selection | ||||||||||||||
| NT | Not Available | Q N M | T5, 8, 10 0+0.3 ±0.2 -0.3–0 | T16, 20 0+0.4 ±0.3 -0.4–0 | T25 0+0.5 ±0.4 -0.5–0 | PKA | 20–300 | 20–200 | 5 | 8 | 10 | |||||
| 20–250 | 20–150 | 16 | 20 | 25 | ||||||||||||
| PKAH | 20–300 | 20–200 | 5 | 8 | 10 | |||||||||||
| PKCA | 10 | |||||||||||||||
| 20–250 | 20–150 | 16 | 20 | |||||||||||||
| 4-Side Milling etc. (4F) | 0.1 mm Increment | Selection | ||||||||||||||
| 4F | Not Available | Q 0+0.2 N ±0.1 M -0.2–0 | PKA | 10–300 | 10–200 | 5 | 8 | 10 | ||||||||
| 10–250 | 10–150 | 16 | 20 | 25 | ||||||||||||
| PKAH | 10–300 | 10–200 | 5 | 8 | 10 | |||||||||||
| PKCA | 10 | |||||||||||||||
| 10–250 | 10–150 | 16 | 20 | |||||||||||||
| 6-Surface Milling etc. (6F) | 0.1 mm Increment | 0.1 mm Increment | ||||||||||||||
| 6F | Q 0+0.2 N ±0.1 NM -0.2–0 | Q 0+0.2 N ±0.1 M -0.2–0 | PKA | 10–300 | 10–200 | 5–9 | ||||||||||
| 10–250 | 10–150 | 9.1–24 | ||||||||||||||
| PKAH | 10–300 | 10–200 | 5–9 | |||||||||||||
| PKCA | 10–300 | 10–200 | 9.1–10 | |||||||||||||
| 10–250 | 10–150 | 10.1–19 | ||||||||||||||
| Upper-Lower Surface Milling etc. | 1 mm Increment | 0.1 mm Increment | ||||||||||||||
| 2F | Q 0+0.2 N ±0.1 NM -0.2–0 | Not Available | PKA | 20–250 | 20–150 | 5–24 | ||||||||||
| PKAH | 5–9 | |||||||||||||||
| PKCA | 9.1–19 | |||||||||||||||
• Dimension Tolerance of A and B
• T Dimension Tolerance, Rate of Camber and Torsion
Precision Guarantee
[ ! ]Reference plane stickers are attached to 4-side milled plates.
| A, B | A, B Dimension Tolerance |
| Unit: mm | |
| ~99 | ±0.5 |
| 100~250 | ±0.75 |
| 251~ | ±1.0 |
• T Dimension Tolerance, Rate of Camber and Torsion
| T | T Dimension Tolerance | Rates of Camber and Torsion | ||
| PKA | PKAH | PKCA | per 1,000mm | |
| 1 | +0.1~+0.5 | - | - | - |
| 2, 3 | ±0.3 | - | - | - |
| 5, 8, 10 | 0~+1.1 | 0~+1.1 | 0~+1.1 | 1.2% or Less |
| 16, 20 | 0~+1.7 | - | 0~+1.7 | 0.8% or Less |
| 25 | - | - | ||
Precision Guarantee
| Finish | Width Parallelism | Perpendicularity of Reference Plane |
| per 100mm | ||
| Guaranteed Perpendicularity of Circular Saw Cuts (NT) | 0.1 | 0.1 |
| 4-Side Milling etc. (4F) | ||
| 6-Surface Milling etc. (6F) | ||
■Pre-drilled Type
[ ! ]Dimension F Specification Range: For 2H and 4H, d(d1)+2.5≤F≤A-d(d1)-5; for 2HL, d(d1)/2+2.5≤F≤A-d(d1)/2-2.5;
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
| Part Number | A | B | T Dimension Range by Material | T | F | G | ||||||||
| Type | T Dimension Tolerance | No. of Holes | ||||||||||||
| PKA PKAH PKCA | Standard Sliding Conductive | Circular Sawing | 1 mm Increment | Selection | 0.5 mm Increment | |||||||||
| Not Available | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20–300 | 20–200 | PKA | 5 | 8 | 10 | 6–291.5 (2H, 4H) 4.5–295.5 (2HL) 6–145.5 (6H) | 4.5–195.5 (2H) 6–191.5 (2HL, 4H, 6H) | |||||
| PKAH | ||||||||||||||
| PKCA | 10 | |||||||||||||
| 20–250 | 20–150 | PKA | 16 | 20 | 25 | 6–241.5 (2H, 4H) 4.5–245.5 (2HL) 6–120.5 (6H) | 4.5–145.5 (2H) 6–141.5 (2HL, 4H, 6H) | |||||||
| PKCA | 16 | 20 | ||||||||||||
| Upper-lower Surface Milling etc. | 1 mm Increment | 0.1 mm Increment | 0.5 mm Increment | |||||||||||
| 2FQ 0+0.2 2FN ±0.1 2FM -0.2–0 | 2H (Horizontal) 2HL (Vertical) 4H 6H | 20–250 | 20–150 | PKA | 5–24 | 6–241.5 (2H, 4H) 4.5–245.5 (2HL) 6–120.5 (6H) | 4.5–145.5 (2H) 6–141.5 (2HL, 4H, 6H) | |||||||
| PKAH | 5–9 | |||||||||||||
| PKCA | 9.1–19 | |||||||||||||
| T Dimension | Pre-drilled Hole Nominal Dia. | ||||||||||||
| Through Hole | Counterbore Hole | Threaded Insert | |||||||||||
| N | Z | M | L | ||||||||||
| 5~7 | 3 4 5 6 8 10 | - | 3 | 4 | (Threaded Insert Length) Select from Table 1 | ||||||||
| 8, 9 | 3 | 4 | 5 | 3 | 4 | 5 | 6 | 8 | |||||
| 10~15 | 4 | 5 | 6 | 3 | 4 | 5 | 6 | 8 | 10 | ||||
| 16~25 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 10 | |||
for 6H, d(d1)+2.5≤F≤(A-d(d1)-5)/2.
[ ! ]Dimension G Specification Range: For 2H, d(d1)/2+2.5≤G≤B-d(d1)/2-2.5; for 2HL, 4H and 6H, d(d1)+2.5≤G≤B-d(d1)-5.
(d for through hole and threaded insert, d1 for counterbore)
[ ! ]For Pre-drilled Type, select N (through hole) or Z (counterbore hole); for Threaded Insert Type, select M (threaded insert) or L (insertion length).
• Dimension Tolerance of A and B
• T Dimension Tolerance, Rate of Camber and Torsion
| A, B | A, B Dimension Tolerance |
| Unit: mm | |
| ~99 | ±0.5 |
| 100~250 | ±0.75 |
| 251~ | ±1.0 |
• T Dimension Tolerance, Rate of Camber and Torsion
| T | T Dimension Tolerance | Rates of Camber and Torsion | ||
| PKA | PKAH | PKCA | per 1,000mm | |
| 5, 8, 10 | 0~+1.1 | 0~+1.1 | 0~+1.1 | 1.2% or Less |
| 16, 20 | 0~+1.7 | - | 0~+1.7 | 0.8% or Less |
| 25 | - | - | ||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PKAH2FM-[20-250/1]-[20-150/1]-[5-9/0.1] |
| PKAH2FN-[20-250/1]-[20-150/1]-[5-9/0.1] |
| PKAH2FQ-[20-250/1]-[20-150/1]-[5-9/0.1] |
| PKAH2H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,4,5,6,8,10] |
| PKAH2H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,4,5,6,8,10] |
| PKAH2H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,4,5,6] |
| PKAH2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-M[3,4,5,6,8,10] |
| PKAH2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-N[3,4,5,6,8,10] |
| PKAH2HL-[20-300/1]-[20-200/1]-[5,8,10,16,20,25]-F[4.5-291.5/0.5]-G[9-191/0.5]-Z[3,4,5,6,8] |
| PKAH4FM-[10-300/0.1]-[10-200/0.1]-[5,8,10] |
| PKAH4FN-[10-300/0.1]-[10-200/0.1]-[5,8,10] |
| PKAH4FQ-[10-300/0.1]-[10-200/0.1]-[5,8,10] |
| PKAH4H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10] |
| PKAH4H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10] |
| PKAH4H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-291.5/0.5]-G[6-191.5/0.5]-Z[3,4,5,6] |
| PKAH6FMM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FMN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FMQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FNM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FNN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FNQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FQM-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FQN-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6FQQ-[10-300/0.1]-[10-200/0.1]-[5-9/0.1] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-120/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-120/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[6-120/0.5]-G[6-191.5/0.5]-Z[3,4,5,6] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[121-145.5/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[121-145.5/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10] |
| PKAH6H-[20-300/1]-[20-200/1]-[5,8,10]-F[121-145.5/0.5]-G[6-191.5/0.5]-Z[3,4,5,6] |
| PKAH-[20-300/1]-[20-200/1]-[5,8,10] |
| PKAHNTM-[20-300/0.5]-[20-200/0.5]-[5,8,10] |
| PKAHNTN-[20-300/0.5]-[20-200/0.5]-[5,8,10] |
| PKAHNTQ-[20-300/0.5]-[20-200/0.5]-[5,8,10] |
| PKCA2FM-[20-250/1]-[20-150/1]-[5-19/0.1] |
| PKCA2FN-[20-250/1]-[20-150/1]-[5-19/0.1] |
| PKCA2FQ-[20-250/1]-[20-150/1]-[5-19/0.1] |
| PKCA2H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-M[3,4,5,6,8,10] |
| PKCA2H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-N[3,4,5,6,8,10] |
| PKCA2H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[4.5-195.5/0.5]-Z[3,4,5,6,8] |
| PKCA2HL-[20-300/1]-[20-200/1]-[10,16,20]-F[4.5-291.5/0.5]-G[9-191/0.5]-M[3,4,5,6,8,10] |
| PKCA2HL-[20-300/1]-[20-200/1]-[10,16,20]-F[4.5-291.5/0.5]-G[9-191/0.5]-N[3,4,5,6,8,10] |
| PKCA2HL-[20-300/1]-[20-200/1]-[10,16,20]-F[4.5-291.5/0.5]-G[9-191/0.5]-Z[3,4,5,6,8] |
| PKCA4FM-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20] |
| PKCA4FN-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20] |
| PKCA4FQ-[10-300/0.1]-[10-200/0.1]-[5,8,10,16,20] |
| PKCA4H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10] |
| PKCA4H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10] |
| PKCA4H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-291.5/0.5]-G[6-191.5/0.5]-Z[3,4,5,6,8] |
| PKCA6FMM-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FMN-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FMQ-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FNM-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FNN-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FNQ-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FQM-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FQN-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6FQQ-[10-300/0.1]-[10-200/0.1]-[5-19/0.1] |
| PKCA6H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-120/0.5]-G[6-191.5/0.5]-M[3,4,5,6,8,10] |
| PKCA6H-[20-300/1]-[20-200/1]-[10,16,20]-F[6-120/0.5]-G[6-191.5/0.5]-N[3,4,5,6,8,10] |
Loading...
More Information
[ ! ]Properties >>P.953
Basic Information
| Material | PEEK | Material | PEEK |
|---|
Specification/Dimensions
-
Grade
-
Hole Machining
-
Finishing Method
- 4-Side Milled
- 6-surface Milled
- Circular Sawing
- Guaranteed Perpendicularity of Circular Sawing
- Upper-lower Surface Milled
-
T Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
-
AB Dimension Tolerance
- M(0/-0.2)
- N(±0.1)
- Q(+0.2/0)
-
A(mm)
-
B(mm)
-
Counterbored Hole Nominal Dia. [Z]
-
F(mm)
-
G(mm)
-
T(mm)
-
Threaded Insert Nominal Dia. [M]
-
Through Hole Nominal Dia. [N]
-
type
- PKA
- PKA#H
- PKA2F#
- PKA2F##H
- PKA4F#
- PKA6F##
- PKAH
- PKAH#H
- PKAH2F#
- PKAH2F##H
- PKAH4F#
- PKAH6F##
- PKAHNT#
- PKANT#
- PKCA
- PKCA#H
- PKCA2F#
- PKCA2F##H
- PKCA4F#
- PKCA6F##
- PKCANT#
-
Color
- Black
- Gray Brown
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Plastic Plates - Polyacetal, Holes Optional
- MC501CD R9 Sheet
- Carbon Fiber Sheet
- Plastic Sheet - ULTEM™ PEI
- Plastic Bar - ULTEM™ PEI
- Plastic Bar -Nylon, 6/12
- Plastic Sheet - PTFE, Glass-Filled
- Plastic Bar - UHMW, Oil-Filled
Complementary Products
-
Hex Socket Cap Screw - M4 - M10, Coarse, Configurable Length, Partially Threaded
MISUMI Days to Ship : 9 Days or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy