(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Hole Machining: Straight
For complete product overview and details on Parallel Keys - Length Selectable/Configurable see the sections below:
Part Number
Configured Part Number is shown.
KEG12-45
How to Select | Type | [ M ]Material | Tensile Strength | ||
L Dimension Selectable | KED | KES | KEG | 1045 Carbon Steel | 600N/mm2 or More |
KEDS | KESS | KEGS | 316 Stainless Steel | 600N/mm2 or More | |
KEDH | KESH | KEGH | 1045 Carbon Steel 25〜35HRC | 700N/mm2 or More | |
Length Configurable | KEDF | KESF | KEGF | 1045 Carbon Steel | 600N/mm2 or More |
Part Number | - | L |
KED6 | - | 30 |
KESH6 | - | 30 |
KEGF2 | - | 12 |
KEGF28 | - | 120 |
L | Tolerance |
~10 | 0 - 0.18 |
11~18 | 0 - 0.18 |
19~30 | 0 - 0.21 |
31~50 | 0 - 0.25 |
51~80 | 0 - 0.30 |
L | Tolerance |
81~120 | 0 - 0.35 |
121~180 | 0 - 0.40 |
181~250 | 0 - 0.46 |
251~300 | 0 - 0.52 |
Part Number | L | H Tolerance | C | ||||||||||||||||||||||||||||
Type | Bh9 | ||||||||||||||||||||||||||||||
KED KES KEG (Stainless Steel) KEDS KESS KEGS | 2 | 0 - 0.025 | 6 | 8 | 10 | 15 | 20 | 2 | 0 - 0.025 | 0.16 ~ 0.25 | |||||||||||||||||||||
3 | 0 - 0.025 | 6 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 25 | 30 | 3 | 0 - 0.025 | 0.16 ~ 0.25 | |||||||||||||||||
4 | 0 - 0.030 | 8 | 10 | 12 | 15 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 4 | 0 - 0.030 | 0.16 ~ 0.25 | ||||||||||||||
5 | 0 - 0.030 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 5 | 0 - 0.030 | 0.25 ~ 0.40 | ||||||||||
6 | 0 - 0.030 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 6 | 0 - 0.030 | 0.25 ~ 0.40 | ||||||||||
7 | 0 - 0.036 | 15 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 60 | 70 | 7 | 0 - 0.036 | 0.25 ~ 0.40 | ||||||||||||||
8 | 0 - 0.036 | 10 | 12 | 15 | 16 | 18 | 20 | 22 | 25 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 7 | 0 - 0.090 | 0.25 ~ 0.40 | ||||||
10 | 0 - 0.036 | 15 | 16 | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 8 | 0 - 0.090 | 0.40 ~ 0.60 | |||||||||||
12 | 0 - 0.043 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 8 | 0 - 0.090 | 0.40 ~ 0.60 | ||||||||||||||
14 | 0 - 0.043 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 80 | 90 | 9 | 0 - 0.090 | 0.40 ~ 0.60 | ||||||||||||||||
15 | 0 - 0.043 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 10 | 0 - 0.090 | 0.40 ~ 0.60 | |||||||||||||||||
16 | 0 - 0.043 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 100 | 10 | 0 - 0.090 | 0.40 ~ 0.60 | ||||||||||||||||||
18 | 0 - 0.043 | 40 | 45 | 50 | 55 | 60 | 70 | 80 | 90 | 100 | 110 | 11 | 0 - 0.110 | 0.40 ~ 0.60 |
Part Number | L | H Tolerance | C | ||||||||||||||||||||
Type | Bh9 | ||||||||||||||||||||||
(Hardened Type) KEDH KESH KEGH | 4 | 0 - 0.030 | 8 | 10 | 12 | 15 | 16 | 20 | 25 | 30 | 4 | 0 - 0.030 | 0.16 ~ 0.25 | ||||||||||
5 | 0 - 0.030 | 10 | 12 | 15 | 16 | 20 | 25 | 26 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 5 | 0 - 0.030 | 0.25 ~ 0.40 | |||||
6 | 0 - 0.030 | 10 | 15 | 16 | 20 | 25 | 26 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 6 | 0 - 0.030 | 0.25 ~ 0.40 | ||||||
7 | 0 - 0.036 | 15 | 20 | 25 | 26 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 7 | 0 - 0.036 | 0.25 ~ 0.40 | ||||||||
8 | 0 - 0.036 | 15 | 20 | 25 | 26 | 28 | 30 | 32 | 35 | 40 | 45 | 50 | 7 | 0 - 0.090 | 0.25 ~ 0.40 | ||||||||
10 | 0 - 0.036 | 15 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 8 | 0 - 0.090 | 0.40 ~ 0.60 | |||||||||||
12 | 0 - 0.043 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 8 | 0 - 0.090 | 0.40 ~ 0.60 |
Part Number | L 1mm Increment | H Tolerance | C | |||
Type | Bh9 | |||||
KEDF KESF KEGF | 2 | 0 - 0.025 | 5~20 | 2 | 0 - 0.025 | 0.16~0.25 |
0 - 0.025 | 21~30 | 2 | 0 - 0.025 | 0.16~0.25 | ||
3 | 0 - 0.025 | 6~30 | 3 | 0 - 0.025 | 0.16~0.25 | |
0 - 0.025 | 31~50 | 3 | 0 - 0.025 | 0.16~0.25 | ||
4 | 0 - 0.030 | 6~50 | 4 | 0 - 0.030 | 0.16~0.25 | |
0 - 0.030 | 51~60 | 4 | 0 - 0.030 | 0.16~0.25 | ||
5 | 0 - 0.030 | 8~50 | 5 | 0 - 0.030 | 0.25~0.40 | |
0 - 0.030 | 51~60 | 5 | 0 - 0.030 | 0.25~0.40 | ||
6 | 0 - 0.030 | 8~60 | 6 | 0 - 0.030 | 0.25~0.40 | |
0 - 0.030 | 61~80 | 6 | 0 - 0.030 | 0.25~0.40 | ||
7 | 0 - 0.036 | 10~60 | 7 | 0 - 0.036 | 0.25~0.40 | |
0 - 0.036 | 61~100 | 7 | 0 - 0.036 | 0.25~0.40 | ||
8 | 0 - 0.036 | 10~80 | 7 | 0 - 0.090 | 0.25~0.40 | |
0 - 0.036 | 81~100 | 7 | 0 - 0.090 | 0.25~0.40 | ||
10 | 0 - 0.036 | 15~80 | 8 | 0 - 0.090 | 0.40~0.60 | |
0 - 0.036 | 81~100 | 8 | 0 - 0.090 | 0.40~0.60 | ||
12 | 0 - 0.043 | 15~80 | 8 | 0 - 0.090 | 0.40~0.60 | |
0 - 0.043 | 81~150 | 8 | 0 - 0.090 | 0.40~0.60 | ||
14 | 0 - 0.043 | 16~90 | 9 | 0 - 0.090 | 0.40~0.60 | |
0 - 0.043 | 91~150 | 9 | 0 - 0.090 | 0.40~0.60 | ||
15 | 0 - 0.043 | 18~90 | 10 | 0 - 0.090 | 0.40~0.60 | |
0 - 0.043 | 91~150 | 10 | 0 - 0.090 | 0.40~0.60 | ||
16 | 0 - 0.043 | 20~100 | 10 | 0 - 0.090 | 0.40~0.60 | |
0 - 0.043 | 101~150 | 10 | 0 - 0.090 | 0.40~0.60 | ||
18 | 0 - 0.043 | 30~110 | 11 | 0 - 0.110 | 0.40~0.60 | |
0 - 0.043 | 111~150 | 11 | 0 - 0.110 | 0.40~0.60 |
Part Number | L 1mm Increment | H Tolerance | C | |||
Type | Bh9 | |||||
KEDF KESF KEGF | 20 | 0 - 0.052 | 40~100 | 12 | 0 - 0.110 | 0.60~0.80 |
0 - 0.052 | 101~150 | 12 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 151~200 | 12 | 0 - 0.110 | 0.60~0.80 | ||
22 | 0 - 0.052 | 40~100 | 14 | 0 - 0.110 | 0.60~0.80 | |
0 - 0.052 | 101~150 | 14 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 151~200 | 14 | 0 - 0.110 | 0.60~0.80 | ||
25 | 0 - 0.052 | 40~100 | 14 | 0 - 0.110 | 0.60~0.80 | |
0 - 0.052 | 101~150 | 14 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 151~200 | 14 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 201~250 | 14 | 0 - 0.110 | 0.60~0.80 | ||
28 | 0 - 0.052 | 40~100 | 16 | 0 - 0.110 | 0.60~0.80 | |
0 - 0.052 | 101~150 | 16 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 151~200 | 16 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 201~250 | 16 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.052 | 251~300 | 16 | 0 - 0.110 | 0.60~0.80 | ||
32 | 0 - 0.062 | 40~100 | 18 | 0 - 0.110 | 0.60~0.80 | |
0 - 0.062 | 101~150 | 18 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.062 | 151~200 | 18 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.062 | 201~250 | 18 | 0 - 0.110 | 0.60~0.80 | ||
0 - 0.062 | 251~300 | 18 | 0 - 0.110 | 0.60~0.80 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
KEG12-45 |
Loading...
Hole Machining | No Machining |
---|
Please check the type/dimensions/specifications of the part KEG12-45 in the Parallel Keys - Length Selectable/Configurable series.
Part Number |
---|
KED10-20 |
KED10-25 |
KED10-30 |
KEG12-50 |
KEG12-55 |
KEG12-60 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy