(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
Hexagonal Posts - One threaded end, configurable length.
- Degreasing
- Spec Change
- Lead Time Reduction
New: Aluminum material is added and available length extended. [July 2023]
One End Tapped Hex Posts (Standoffs) are available in 1018 Carbon Steel or Equivalent, A2011-T8 Aluminum Alloy and 304 Stainless Steel, with the following options for Surface Treatment : Black Oxide / Electroless Nickel Plating / Clear or Black Anodize or No Surface Treatment. The Pilot Size is also configurable..
[Diameter range] 5mm - 32mm
[Length range] 15mm - 1000mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- inCAD Components
Part Number
Configured Part Number is shown.
[ ! ]Anti-rust Oil is applied on 1018 Carbon Steel or equivalent products.
・Materials
| Type | [ M ]Material | [ S ]Surface Treatment |
| One End Tapped | ||
| NLMN | 1018 Carbon Steel or Equivalent | - |
| LSMN | Black Oxide | |
| PLMN | Electroless Nickel Plating | |
| SLMN | 304 Stainless Steel | - |
Specifications
| Part Number | - | L | - | M |
| NLMN6 | - | 50 | - | M3 |
| Part Number | L 0.5mm Increment | M (Coarse) | (C) | ||||||||||||
| Type | B | ||||||||||||||
| One End Tapped 1018 Carbon Steel or Equivalent NLMN LSMN PLMN 304 Stainless Steel SLMN | 5 | 8~ 100 | 2 | 2.6 | 5.8 | ||||||||||
| 6 | 15~ 100 | 3 | 4 | 6.9 | |||||||||||
| 7 | 15~200 | 3 | 4 | 8.1 | |||||||||||
| 8 | 20~250 | 3 | 4 | 5 | 9.2 | ||||||||||
| 10 | 20~350 | 4 | 5 | 6 | 11.5 | ||||||||||
| 12 | 25~500 | 4 | 5 | 6 | 8 | 13.9 | |||||||||
| 13 | 30~500 | 4 | 5 | 6 | 8 | 15.0 | |||||||||
| 14 | 35~600 | 4 | 5 | 6 | 8 | 10 | 16.2 | ||||||||
| 17 | 35~600 | 5 | 6 | 8 | 10 | 19.6 | |||||||||
| 19 | 45~600 | 5 | 6 | 8 | 10 | 12 | 21.9 | ||||||||
| 24 | 65~700 | 6 | 8 | 10 | 12 | 16 | 20 | 27.7 | |||||||
| 27 | 65~800 | 6 | 8 | 10 | 12 | 16 | 20 | 31.2 | |||||||
| 30 | 80~1000 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 34.6 | ||||||
| 32 | 80~1000 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 36.9 | ||||||
L dim. tolerance is normally.
L 8~300 ±0.1
L300.5~600 ±0.3
L600.5~800 ±0.4
However, when L≤200, all simultaneously produced pieces in a lot will have L dim. tolerance of ±0.02 or better.
L 8~300 ±0.1
L300.5~600 ±0.3
L600.5~800 ±0.4
However, when L≤200, all simultaneously produced pieces in a lot will have L dim. tolerance of ±0.02 or better.
Alterations
.GIF)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LSMN5-[8-50/0.5]-M[2,2.6] |
| LSMN6-[15-50/0.5]-M[3,4] |
| LSMN7-[15-150/0.5]-M[3,4] |
| LSMN8-[20-250/0.5]-M[3,4,5] |
| LSMN10-[20-350/0.5]-M[4,5,6] |
| LSMN12-[25-400/0.5]-M[4,5,6,8] |
| LSMN13-[30-400/0.5]-M[4,5,6,8] |
| LSMN14-[35-500/0.5]-M[4,5,6,8,10] |
| LSMN17-[35-500/0.5]-M[5,6,8,10] |
| LSMN19-[45-500/0.5]-M[5,6,8,10,12] |
| LSMN24-[65-600/0.5]-M[6,8,10,12,16,20] |
| LSMN27-[65-700/0.5]-M[6,8,10,12,16,20] |
| LSMN30-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| LSMN32-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| NLMN5-[8-50/0.5]-M[2,2.6] |
| NLMN6-[15-50/0.5]-M[3,4] |
| NLMN7-[15-150/0.5]-M[3,4] |
| NLMN8-[20-250/0.5]-M[3,4,5] |
| NLMN10-[20-350/0.5]-M[4,5,6] |
| NLMN12-[25-400/0.5]-M[4,5,6,8] |
| NLMN13-[30-400/0.5]-M[4,5,6,8] |
| NLMN14-[35-500/0.5]-M[4,5,6,8,10] |
| NLMN17-[35-500/0.5]-M[5,6,8,10] |
| NLMN19-[45-500/0.5]-M[5,6,8,10,12] |
| NLMN24-[65-600/0.5]-M[6,8,10,12,16,20] |
| NLMN27-[65-700/0.5]-M[6,8,10,12,16,20] |
| NLMN30-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| NLMN32-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| PLMN5-[8-50/0.5]-M[2,2.6] |
| PLMN6-[15-50/0.5]-M[3,4] |
| PLMN7-[15-200/0.5]-M[3,4] |
| PLMN7-[15-200/0.5]-MD[3,4] |
| PLMN8-[20-250/0.5]-M[3,4,5] |
| PLMN8-[20-250/0.5]-MD[3,4,5] |
| PLMN10-[20-350/0.5]-M[3,4,5,6] |
| PLMN10-[20-350/0.5]-MD[3,4,5,6] |
| PLMN12-[25-400/0.5]-M[4,5,6,8] |
| PLMN13-[30-400/0.5]-M[4,5,6,8] |
| PLMN14-[35-500/0.5]-M[4,5,6,8,10] |
| PLMN17-[35-500/0.5]-M[5,6,8,10] |
| PLMN19-[45-500/0.5]-M[5,6,8,10,12] |
| PLMN24-[65-600/0.5]-M[6,8,10,12,16,20] |
| PLMN27-[65-700/0.5]-M[6,8,10,12,16,20] |
| PLMN30-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| PLMN32-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| SLMN5-[8-50/0.5]-M[2,2.6] |
| SLMN6-[15-50/0.5]-M[3,4] |
| SLMN7-[15-150/0.5]-M[3,4] |
| SLMN8-[20-250/0.5]-M[3,4,5] |
| SLMN10-[20-350/0.5]-M[4,5,6] |
| SLMN12-[25-400/0.5]-M[4,5,6,8] |
| SLMN13-[30-400/0.5]-M[4,5,6,8] |
| SLMN14-[35-500/0.5]-M[4,5,6,8,10] |
| SLMN17-[35-500/0.5]-M[5,6,8,10] |
| SLMN19-[45-500/0.5]-M[5,6,8,10,12] |
| SLMN24-[65-600/0.5]-M[6,8,10,12,16,20] |
| SLMN27-[65-700/0.5]-M[6,8,10,12,16,20] |
| SLMN30-[80-800/0.5]-M[6,8,10,12,16,20,24] |
| SLMN32-[80-800/0.5]-M[6,8,10,12,16,20,24] |
Loading...
Basic Information
| Type | Hex | End Shape (Left) | Taps | End Shape (Right) | Straight |
|---|---|---|---|---|---|
| Style | Solid | Engraved Scale | Without Scale | Pilot (Concave-Convex at End) | Not Provided |
Specification/Dimensions
-
Post Size(mm)
-
Length L(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Black Oxide Coating
- Electroless Nickel Plating
-
Thread Dia. M(mm)
-
Thread Dia. M (Depth=Mx3) [Code MD](mm)
-
type
- LSMN
- NLMN
- PLMN
- SLMN
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Circular Posts - One threaded end, one internal threaded end, flat surfaces for wrench.
- Circular Posts - Made of resin, one threaded end or both ends threaded, with flat surfaces for a wrench.
- Hexagonal Posts - Both ends threaded, (Inches).
- Hexagonal Posts - One end with external threading, one end with internal threading, selectable length (inches).
- Hexagonal Posts - One end with external threading and the other end with internal threading, selectable thread, (inches).
- Square Posts - Graduated, configurable length, hollow.
- Circular Posts - One end with external thread and one with internal thread, configurable dimensions.
- Circular Posts - Hollow, with V-groove, configurable length.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy