(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Straight Locating Pins - Round head with tapered, flat tip and straight shank. (CLPSTAH3-L10-E0.5-A15)

Straight Locating Pins - Round head with tapered, flat tip and straight shank.
  • Spec Change

Straight, Tapered-shaped Locating Pins with the angle selectable

[FY21 new product]
・Configurable D dimension can be specified in increments of 0.01mm (new product type)

  • inCAD Components
Locating Pin- Straight, D Tolerance,Tapped:Related Image
[ ! ]440C or 420 Stainless Steel has an identification groove on D part.
[ ! ]It may not come with the center hole There may not be a centering hole depending on the total dimensions.
・Materials
Material No.[ M ]Material[ S ]Surface Treatment[ H ]HardnessType
Standard
O1 Tool Steel Equivalent-Treated Hardness: 60 ~ 63HRCLPSTA
O1 Tool Steel EquivalentHard Chrome PlatingHardness: 50 ~ 55HRC
Plating Hardness: 750HV ~
GLPSTA
O1 Tool Steel Equivalent--BLPSTA
304 Stainless Steel--SLPSTA
304 Stainless SteelHard Chrome PlatingPlating Hardness: 750HV ~HLPSTA
440C or 420 Stainless Steel-Treated Hardness: 50 ~ 55HRCCLPSTA

Specifications

Part Number-L-E-A
   
Type D Tol. D
LPSTA M 6-L14.0-E2.5-A30
■Tolerance Selection
DStandard Grade
MPGH
m6p6g6h7
5~6+0.012
+0.004
+0.020
+0.012
-0.004
-0.012
0
-0.012
8, 10+0.015
+0.006
+0.024
+0.015
-0.005
-0.014
0
-0.015
[ ! ]D-2EtanA≥0.73 (Tip Diameter Ø0.73 or more)
Reference: tan15°≈0.267 tan30°≈0.577 tan45°≈1 tan60°≈1.732
■Standard
Part NumberL
0.1mm Increment
E
0.1mm Increment
AC
TypeD Tol.D
LPSTA
GLPSTA
BLPSTA
SLPSTA
HL
PSTA
CLPSTA
M (m6)
P (p6)
G (g6)
H (h7)
13.0~10.00.5~10.015
30

45
60
0.1
23.0~20.00.5
30.5
43.0~25.01
54.0~30.01
65.0~40.01
85.0~40.01.5
102

Alterations

Locating Pin- Straight, D Tolerance,Tapped:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
CLPSTAH3-L10-E0.5-A15
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSMaterial Heat Treatment Surface Finish Mounted Side Outer Diameter D
(mm)
Shank Dia. Tolerance Mounting Section Length L
(mm)
A
(°)
Taper Length E
(mm)
1 Piece(s)

10 Days or more

10[Stainless Steel] 440C or 420 Stainless SteelHardened[None] No3h710150.5

Loading...

  1. 1
 

Basic Information

Basic Shape Straight/With Air Vent Head Shape Round Head Tip Shape Tapered
Drive No Shank Style Straight(Press Fit)

Additional Products in this Category

Complementary Products

Tech Support