(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the head newly shaped (No Edge). Such reshaping prevents the located object from being damaged. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Part Number
Configured Part Number is shown.
Part Number | - | P | - | L | - | B | - | E | - | R | ||||||
Type | D Tol. | P Tolerance | D | |||||||||||||
MKFPSA | M | S | 16 | - | P12.00 | - | L14 | - | B4.0 | - | E5.0 | - | R15 |
D or P | Standard Grade | Precision Grade | |||||
M | P | G | H | S | A | B | |
m6 | p6 | g6 | h7 | - | - | - | |
2.00 ~ 3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
18.01 ~ 20.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.5mm Increment | E 0.5mm Increment | R | C | Compliance with Standard | |||||||||
Type | D Tolerance | P Tolerance | D | ① KFPSA | ② GKFPSA | ③ SKFPSA | ④ CKFPSA | ⑤ MKFPSA | ⑥ MGKFPSA | ⑦ MCKFPSA | ||||||
KFPSA GKFPSA * SKFPSA CKFPSA (Buff Finished) MKFPSA * MGKFPSA * MCKFPSA * [ ! ]Applicable when D≥5 and P≥5. | M P G H *A *B | S M P G H *A *B | 3 | 2.00~3.00 | 3~8 | 2.0~10.0 | 1.0~15.0 | 5 10 15 20 25 30 | 0.5 | ● | ● | ● | ● | - | - | - |
4 | 2.00~4.00 | 4~12 | 2.0~10.0 | 1 | ● | ● | ● | ● | - | - | - | |||||
5 | 2.00~5.00 | 5~12 | 2.0~10.0 | 1 | ● | ● | ● | ● | ● | ● | ● | |||||
6 | 2.00~6.00 | 5~12 | 3.0~12.0 | 1 | ● | ● | ● | ● | ● | ● | ● | |||||
8 | 3.00~8.00 | 8~15 | 3.0~14.0 | 1.5 | ● | ● | ● | ● | ● | ● | ● | |||||
10 | 3.00~10.00 | 8~15 | 3.0~16.0 | 2 | ● | ● | ● | ● | ● | ● | ● | |||||
12 | 5.00~12.00 | 10~18 | 3.0~18.0 | 2 | ● | ● | ● | ● | ● | ● | ● | |||||
13 | 6.00~13.00 | 12~20 | 3.0~20.0 | [ ! ]Configurable range depends on P dimension. Confirm "Details of E Dimension and R Dimension Range" in the table. | 2 | ● | ● | ● | ● | ● | ● | ● | ||||
16 | 10.00~16.00 | 14~25 | 3.0~20.0 | 3 | ● | ● | ● | ● | ● | ● | ● | |||||
20 | 13.00~20.00 | 18~32 | 3.0~20.0 | 3 | ● | ● | ● | ● | ● | ● | ● |
P 0.01mm Increment | E 0.5mm Increment | R | |||||
2.00~4.00 | 1.0~2.0 | 5 | 10 | ||||
4.01~8.00 | 2.5~4.0 | 10 | 15 | ||||
8.01~12.00 | 4.5~7.0 | 10 | 15 | 20 | |||
12.01~16.00 | 5.0~10.0 | 15 | 20 | 25 | |||
16.01~20.00 | 5.0~15.0 | 20 | 25 | 30 |
Part Number | Available Sizes | |||||||||
Type | D Tolerance | P Tolerance | D | ① KFPSA | ② GKFPSA | ③ SKFPSA | ④ CKFPSA | ⑤ MKFPSA | ⑥ MGKFPSA | ⑦ MCKFPSA |
KFPSA GKFPSA * SKFPSA CKFPSA (Buff Finished) MKFPSA * MGKFPSA * MCKFPSA * [ ! ]Applicable when D≥5 and P≥5. | M P G H *A *B | S M P G H *A *B | 3 | - | - | - | ||||
4 | - | - | - | |||||||
5 | ||||||||||
6 | ||||||||||
8 | ||||||||||
10 | ||||||||||
12 | ||||||||||
13 | ||||||||||
16 | ||||||||||
20 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
MKFPSAGG16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAGG20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAGH5-P[2-5/0.01]-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[5,10,15] |
MKFPSAGH6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGH8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGH10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGH12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGH13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAGH16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
MKFPSAGH20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAGM5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAGM6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGM8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGM10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAGM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAGM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAGM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAGP5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAGP6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGP8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGP10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGP12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGP13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAGP16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAGP16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAGP20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAGS5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAGS6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGS8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAGS10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGS12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAGS13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAGS16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAGS16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAGS20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAHG5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAHG6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHG8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHG10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHG12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHG13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAHG16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAHG16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAHG20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAHH5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAHH6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHH8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHH10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHH12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHH13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAHH16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAHH16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAHH20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAHM5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAHM6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHM8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHM10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHM12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHM13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAHM16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
MKFPSAHM20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAHP5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAHP6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHP8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHP10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHP12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHP13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAHP16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
MKFPSAHP20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAHS5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAHS6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHS8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAHS10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHS12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAHS13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAHS16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-7/0.5]-R[10,15,20,25] |
MKFPSAHS16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[5-10/0.5]-R[10,15,20,25] |
MKFPSAHS20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAMG5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAMG6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[1-4/0.5]-R[5,10,15] |
MKFPSAMG8-P[5-8/0.01]-L[8-15/1]-B[3-14/0.5]-E[2.5-4/0.5]-R[10,15] |
MKFPSAMG10-P[5-10/0.01]-L[8-15/1]-B[3-16/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAMG12-P[5-12/0.01]-L[10-18/1]-B[3-18/0.5]-E[2.5-7/0.5]-R[10,15,20] |
MKFPSAMG13-P[6-13/0.01]-L[12-20/1]-B[3-20/0.5]-E[2.5-10/0.5]-R[10,15,20] |
MKFPSAMG16-P[10-16/0.01]-L[14-25/1]-B[3-20/0.5]-E[4.5-10/0.5]-R[10,15,20,25] |
MKFPSAMG20-P[13-20/0.01]-L[18-32/1]-B[3-20/0.5]-E[5-15/0.5]-R[15,20,25,30] |
MKFPSAMH5-P5-L[5-12/1]-B[2-10/0.5]-E[1-2/0.5]-R[10,15] |
MKFPSAMH6-P[5-6/0.01]-L[5-12/1]-B[3-12/0.5]-E[2.5-4/0.5]-R[10,15] |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | Small Head | Head Shape | Round | Head Tip Shape | Round Tapered |
---|---|---|---|---|---|
Drive | No | Shank Style | Straight(Press Fit) |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy