(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Shape: Large Head
•Head Dia. Tolerance: 0/-0.01
•Shank Dia. Tolerance: 0.012/0.007
•Head Shape: Round
•Head Tip Shape: Round Tapered
Part Number
Configured Part Number is shown.
[ M ]Material | [ H ]Hardness | B Fixed | B Configurable |
O1 Tool Steel Equivalent | Treated Hardness: 60 ~ 63HRC | HPST | HPSF |
304 Stainless Steel | - | SHPST | SHPSF |
440C or 420 Stainless Steel | Treated Hardness: 50 ~ 55HRC | CHPST | CHPSF |
Part Number | - | L | - | P | - | B |
HPST5 HPSF4 | - - | 15 10 | - - | P7.20 P5.05 | - | B1.20 |
Part Number | L | P 0.01mm Increment | B | E | ℓ | ||||
Type | D | D Tolerance | |||||||
Standard HPST SHPST CHPST | 1 | +0.012 +0.007 | 12 | 1.50~3.00 | 1 | 3 | 3 | ||
2 | +0.012 +0.007 | 12 | 2.50~4.00 | 1 | 4 | 3 | |||
3 | +0.012 +0.007 | 12 | 15 | 4.00~6.00 | 2 | 4 | 3 | ||
4 | +0.012 +0.007 | 12 | 15 | 5.00~7.00 | 2 | 5 | 3 | ||
5 | +0.012 +0.007 | 12 | 15 | 6.00~8.00 | 2 | 5 | 3 | ||
6 | +0.012 +0.007 | 12 | 15 | 7.00~9.00 | 2 | 6 | 3 | ||
8 | +0.012 +0.007 | 15 | 18 | 9.00~13.00 | 3 | 6 | 3 | ||
10 | +0.012 +0.007 | 15 | 18 | 11.00~15.00 | 3 | 6 | 3 |
Part Number | L | P 0.01mm Increment | B 0.01mm Increment | E | ℓ | ||||||||||
Type | D | D Tolerance | |||||||||||||
HPSF SHPSF CHPSF | 1 | +0.012 +0.007 | 3 | 4 | 5 | 6 | 8 | 10 | 12 | 1.50~3.00 | 1.00~5.00 | 3 | 1 | ||
2 | +0.012 +0.007 | 4 | 5 | 6 | 8 | 10 | 12 | 2.50~4.00 | 1.00~10.00 | 4 | 1 | ||||
3 | +0.012 +0.007 | 5 | 6 | 8 | 10 | 12 | 15 | 4.00~6.00 | 1.00~10.00 | 4 | 1 | ||||
4 | +0.012 +0.007 | 5 | 6 | 8 | 10 | 12 | 15 | 5.00~7.00 | 1.00~10.00 | 5 | 1 | ||||
5 | +0.012 +0.007 | 5 | 6 | 8 | 10 | 12 | 15 | 6.00~8.00 | 1.00~10.00 | 5 | 1 | ||||
6 | +0.012 +0.007 | 6 | 8 | 10 | 12 | 15 | 7.00~10.00 | 1.00~12.00 | 6 | 1 | |||||
8 | +0.012 +0.007 | 8 | 10 | 12 | 15 | 9.00~13.00 | 1.00~15.00 | 6 | 1 | ||||||
10 | +0.012 +0.007 | 10 | 12 | 15 | 18 | 11.00~15.00 | 1.00~20.00 | 6 | 1 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
CHPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
CHPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
CHPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
CHPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
CHPSF5-[5,6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
CHPSF6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
CHPSF8-[8,10,12,15]-P[9-13/0.01]-B[1-15/0.01] |
CHPSF10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
CHPST1-12-P[1.5-3/0.01] |
CHPST2-12-P[2.5-4/0.01] |
CHPST3-[12,15]-P[4-6/0.01] |
CHPST4-[12,15]-P[5-7/0.01] |
CHPST5-[12,15]-P[6-8/0.01] |
CHPST6-[12,15]-P[7-9/0.01] |
CHPST8-[15,18]-P[9-13/0.01] |
CHPST10-[15,18]-P[11-15/0.01] |
HPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
HPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
HPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
HPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
HPSF5-[5,6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
HPSF6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
HPSF8-[8,10,12,15]-P[9-13/0.01]-B[1-15/0.01] |
HPSF10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
HPST1-12-P[1.5-3/0.01] |
HPST2-12-P[2.5-4/0.01] |
HPST3-[12,15]-P[4-6/0.01] |
HPST4-[12,15]-P[5-7/0.01] |
HPST5-[12,15]-P[6-8/0.01] |
HPST6-[12,15]-P[7-9/0.01] |
HPST8-[15,18]-P[9-13/0.01] |
HPST10-[15,18]-P[11-15/0.01] |
SHPSF1-[3,4,5,6,8,10,12]-P[1.5-3/0.01]-B[1-5/0.01] |
SHPSF2-[4,5,6,8,10,12]-P[2.5-4/0.01]-B[1-10/0.01] |
SHPSF3-[5,6,8,10,12,15]-P[4-6/0.01]-B[1-10/0.01] |
SHPSF4-[5,6,8,10,12,15]-P[5-7/0.01]-B[1-10/0.01] |
SHPSF5-[5,6,8,10,12,15]-P[6-8/0.01]-B[1-10/0.01] |
SHPSF6-[6,8,10,12,15]-P[7-10/0.01]-B[1-12/0.01] |
SHPSF8-[8,10,12,15]-P[9-13/0.01]-B[1-15/0.01] |
SHPSF10-[10,12,15,18]-P[11-15/0.01]-B[1-20/0.01] |
SHPST1-12-P[1.5-3/0.01] |
SHPST2-12-P[2.5-4/0.01] |
SHPST3-[12,15]-P[4-6/0.01] |
SHPST4-[12,15]-P[5-7/0.01] |
SHPST5-[12,15]-P[6-8/0.01] |
SHPST6-[12,15]-P[7-9/0.01] |
SHPST8-[15,18]-P[9-13/0.01] |
SHPST10-[15,18]-P[11-15/0.01] |
Loading...
Basic Shape | Large Head | Head Shape | Round | Head Tip Shape | Round Tapered |
---|---|---|---|---|---|
Drive | No | Shank Style | Straight(Press Fit) | Surface Finish | No |
Tolerance of Positioning Side Outer Diameter | 0/-0.01 | Shank Dia. Tolerance | 0.012/0.007 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy