(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the Sphere-shaped head with no edge. And the Buff Finished products with the appearance and sliding property improved are added to the product line-up.
Part Number
Configured Part Number is shown.
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | |
Round | Diamond | ||||
① | O1 Tool Steel Equivalent | - | Hardness: 60 ~ 63HRC | KFQNA | KFQND |
② | O1 Tool Steel Equivalent | Hard Chrome Plating | Hardness: 50 ~ 55HRC Plating Hardness :750 HV min. | GKFQNA | - |
③ | 304 Stainless Steel | - | - | SKFQNA | SKFQND |
④ | 440C or 420 Stainless Steel | - | Hardness: 50 ~ 55HRC | CKFQNA | CKFQND |
⑤ | O1 Tool Steel Equivalent | Buffed Surface | Hardness: 60 ~ 63HRC | MKFQNA | MKFQND |
⑥ | O1 Tool Steel Equivalent | Hard Chrome Plating + Buffed | Hardness: 50 ~ 55HRC Plating Hardness :750 HV min. | MGKFQNA | MGKFQND |
⑦ | 440C or 420 Stainless Steel | Buffed Surface | Hardness: 50 ~ 55HRC | MCKFQNA | MCKFQND |
Part Number | - | P | - | L | - | B | ||||||||
Type | Shape | D Tol. | P Tolerance | D | ||||||||||
KFQN | A | M | S | 6 | - | P8.00 | - | L8 | - | B6.0 |
D or P | Standard Grade | Precision Grade | |||||
M | P | G | H | S | A | B | |
m6 | p6 | g6 | h7 | - | - | - | |
3.00 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 0 -0.010 | 0 -0.01 | +0.005 0 | 0 -0.005 |
3.01 ~ 6.00 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 0 -0.012 | |||
6.01 ~ 10.00 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 0 -0.015 | |||
10.01 ~ 18.00 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 0 -0.018 | |||
18.01 ~ 30.00 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 0 -0.021 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | (W) | M | |||||
Type | Shape | D Tolerance | P Tolerance | D | ||||||
KFQN GKFQN* SKFQN CKFQN | (Buff Finished) MKFQN* MGKFQN* MCKFQN* [ ! ]Applicable when D≥5. | A (Round) D (Diamond) | M P G H *A *B | S M P G H *A *B | 3 | 3.50~6.00 | 2~6 | 2.0~10.0 | 1.5 | M 3 |
4 | 4.50~7.00 | 2~8 | 2.0~10.0 | 1.8 | M 4 | |||||
5 | 5.50~8.00 | 3~10 | 2.0~10.0 | 2.2 | M 5 | |||||
6 | 6.50~10.00 | 3~10 | 2.0~12.0 | 3 | M 6 | |||||
8 | 9.00~13.0) | 5~10 | 2.0~15.0 | 3.5 | M 8 | |||||
10 | 11.00~15.00 | 5~15 | 3.0~20.0 | 4 | M10 | |||||
12 | 13.00~18.00 | 8~15 | 3.0~20.0 | 5 | M12 | |||||
16 | 17.00~25.00 | 8~20 | 5.0~20.0 | 7 | M16 | |||||
20 | 22.00~30.00 | 10~20 | 5.0~20.0 | 9 | M20 |
D | Available Sizes Round Shape | Available Sizes Diamond Shape | ||||||||
①O1 Tool Steel Hardened KFQNA | ②Hard O1 Tool Steel GKFQNA | ③304 Stainless Steel SKFQNA | ⑤Stainless Steel440C CKFQNA | ⑧Hard O1 Tool Steel + Buffed MGKFQNA | ①O1 Tool Steel Hardened KFQND | ②Hard O1 Tool Steel GKFQND | ③304 Stainless Steel SKFQND | ⑤Stainless Steel440C CKFQND | ⑧Hard O1 Tool Steel + Buffed MGKFQND | |
3 | - | - | - | |||||||
4 | - | - | - | |||||||
5 | - | |||||||||
6 | - | |||||||||
8 | - | |||||||||
10 | - | |||||||||
12 | - | |||||||||
16 | - | |||||||||
20 | - |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
MCKFQNAMH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNAMH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNAMH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MCKFQNAPH5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
MCKFQNAPH6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
MCKFQNAPH8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
MCKFQNAPH10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
MCKFQNAPH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNAPH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNAPH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MCKFQNDGH5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
MCKFQNDGH6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
MCKFQNDGH8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
MCKFQNDGH10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
MCKFQNDGH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNDGH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNDGH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MCKFQNDHH5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
MCKFQNDHH6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
MCKFQNDHH8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
MCKFQNDHH10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
MCKFQNDHH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNDHH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNDHH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MCKFQNDMH5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
MCKFQNDMH6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
MCKFQNDMH8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
MCKFQNDMH10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
MCKFQNDMH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNDMH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNDMH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MCKFQNDPH5-P[5.5-8/0.01]-L[3-10/1]-B[2-10/0.1] |
MCKFQNDPH6-P[6.5-10/0.01]-L[3-10/1]-B[2-12/0.1] |
MCKFQNDPH8-P[9-13/0.01]-L[5-10/1]-B[2-15/0.1] |
MCKFQNDPH10-P[11-15/0.01]-L[5-15/1]-B[3-20/0.1] |
MCKFQNDPH12-P[13-18/0.01]-L[8-15/1]-B[3-20/0.1] |
MCKFQNDPH16-P[17-25/0.01]-L[8-20/1]-B[5-20/0.1] |
MCKFQNDPH20-P[22-30/0.01]-L[10-20/1]-B[5-20/0.1] |
MGKFQNAGH5-P[5.5-8/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAGH6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAGH8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1] |
MGKFQNAGH10-P[11-17/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAGH12-P[13-20/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAGH16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAGH20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAHH5-P[5.5-8/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAHH6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAHH8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1] |
MGKFQNAHH10-P[11-17/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAHH12-P[13-20/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAHH16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAHH20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAMH5-P[5.5-8/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAMH6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAMH8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1] |
MGKFQNAMH10-P[11-17/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAMH12-P[13-20/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAMH16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAMH20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAPH5-P[5.5-8/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAPH6-P[6.5-10/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNAPH8-P[8.5-15/0.01]-L[0-10/1]-B[2-30/0.1] |
MGKFQNAPH10-P[11-17/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAPH12-P[13-20/0.01]-L[0-15/1]-B[3-30/0.1] |
MGKFQNAPH16-P[17-27/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNAPH20-P[22-30/0.01]-L[0-20/1]-B[5-30/0.1] |
MGKFQNDGH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1] |
MGKFQNDGH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1] |
MGKFQNDGH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNDGH10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDGH12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDGH16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDGH20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDHH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1] |
MGKFQNDHH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1] |
MGKFQNDHH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNDHH10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDHH12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDHH16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDHH20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDMH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1] |
MGKFQNDMH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1] |
MGKFQNDMH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1] |
MGKFQNDMH10-P[11-15/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDMH12-P[13-18/0.01]-L[0-15/1]-B[3-20/0.1] |
MGKFQNDMH16-P[17-25/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDMH20-P[22-30/0.01]-L[0-20/1]-B[5-20/0.1] |
MGKFQNDPH5-P[5.5-8/0.01]-L[0-10/1]-B[2-10/0.1] |
MGKFQNDPH6-P[6.5-10/0.01]-L[0-10/1]-B[2-12/0.1] |
MGKFQNDPH8-P[9-13/0.01]-L[0-10/1]-B[2-15/0.1] |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
Basic Shape | Large Head | Head Tip Shape | Spherical Surface | Drive | No |
---|---|---|---|---|---|
Shank Style | Male thread |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy