(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Pillow Blocks - Cast, Standard (PDRCP20)
Click this image to zoom it.
Move the mouse over the image to zoom
- On Sale Till 15/12/2024
- Volume Discount
New: Standard size with lubrication free type is added. [June 2023]
•The lubrication-free version comes pre-filled with the correct amount of grease, and no lubrication is required for usage under normal conditions.
•Unit, Type: Bearing Unit
•Bearing Unit, Type: Pillow Type
•Bearing Inner Dia. Shape: Cylindrical HoleSet Screw
•Unit Body Material: Cast Iron Class No.30
•Rolling Element Material: Steel
- inCAD Components
Part Number
Configured Part Number is shown.
PDRCP20
Accuracy:JIS B 1558
JIS B 1514
JIS B 1559
Bearing Inner Diameter Tolerance: H7 (Clearance Fit)
[ ! ]Only PDRCP, J7 (Transition Fit)
Operating Temperature: -15 ~ +100°C
Grease Fitting Nominal Diameter: 1/4 to 28 UNF (Unified Standard)
[ ! ]Ball bearing moves slightly due to self-aligning function.
[ ! ]For PDRCP, the fit between the main body and the bearing is designed to be slightly tight to maintain transition fit.
If the bearing is skewed upon delivery, insert the shaft or similar into the bearing and adjust the inclination.
[ ! ]The lubrication-free version comes pre-filled with the correct amount of grease, and no lubrication is required for usage under normal conditions.
JIS B 1514
JIS B 1559
Bearing Inner Diameter Tolerance: H7 (Clearance Fit)
[ ! ]Only PDRCP, J7 (Transition Fit)
Operating Temperature: -15 ~ +100°C
Grease Fitting Nominal Diameter: 1/4 to 28 UNF (Unified Standard)
[ ! ]Ball bearing moves slightly due to self-aligning function.
[ ! ]For PDRCP, the fit between the main body and the bearing is designed to be slightly tight to maintain transition fit.
If the bearing is skewed upon delivery, insert the shaft or similar into the bearing and adjust the inclination.
[ ! ]The lubrication-free version comes pre-filled with the correct amount of grease, and no lubrication is required for usage under normal conditions.
・Materials
| Component | [ M ]Material |
| ①Housing | [ M ] Cast Iron Class No.30 |
| ②Bearing | [ M ] 52100 Bearing Steel |
| ③Rubber Seal | [ M ] Nitrile Rubber (NBR Nitrile Rubber ) |
| ④Set Screw | [ M ] 4137 Alloy Steel |
Specifications
| Part Number |
| PDR15 PDRCP12 |
| Part Number | JIS Nominal | H | L | L1 | A | d1 | d | t | H1 | B | S | Basic Load Rating (kN) | Set Screw | Mass (g) | ||||
| Type | D | Cr (Dynamic) | Cor (Static) | M1 | Tightening Torque (N • cm) | Axial Load Capacity (N) | PDR | |||||||||||
| PDR | 12 | UCP201 | 30.2 | 127 | 95 | 38 | 19 | 13 | 15 | 62 | 31.0 | 12.7 | 12.8 | 6.6 | M6x0.75 | 392 | 640 | 650 |
| 15 | UCP202 | 30.2 | 127 | 95 | 38 | 19 | 13 | 15 | 62 | 31.0 | 12.7 | 12.8 | 6.6 | M6x0.75 | 392 | 640 | 630 | |
| 17 | UCP203 | 30.2 | 127 | 95 | 38 | 19 | 13 | 15 | 62 | 31.0 | 12.7 | 12.8 | 6.6 | M6x0.75 | 392 | 640 | 620 | |
| 20 | UCP204 | 33.3 | 127 | 95 | 38 | 19 | 13 | 15 | 65 | 31.0 | 12.7 | 12.8 | 6.6 | M6x0.75 | 490 | 1280 | 650 | |
| 25 | UCP205 | 36.5 | 140 | 105 | 38 | 16 | 13 | 16 | 70 | 34.1 | 14.3 | 14.0 | 7.9 | M6x0.75 | 490 | 1400 | 790 | |
| 30 | UCP206 | 42.9 | 165 | 121 | 48 | 21 | 17 | 18 | 83 | 38.1 | 15.9 | 19.6 | 11.3 | M6x0.75 | 490 | 1960 | 1260 | |
| 35 | UCP207 | 47.6 | 167 | 127 | 48 | 21 | 17 | 19 | 94 | 42.9 | 17.5 | 25.9 | 15.4 | M8x1 | 1180 | 2590 | 1590 | |
| 40 | UCP208 | 49.2 | 184 | 137 | 54 | 25 | 17 | 19 | 100 | 49.2 | 19 | 29.3 | 17.9 | M8x1 | 1180 | 2930 | 1920 | |
| 45 | UCP209 | 54.0 | 190 | 146 | 54 | 22 | 17 | 20 | 108 | 49.2 | 19 | 33.0 | 20.5 | M8x1 | 1180 | 3300 | 2190 | |
| 50 | UCP210 | 57.2 | 206 | 159 | 60 | 25 | 20 | 22 | 114 | 51.6 | 19 | 35.5 | 23.2 | M10x1.25 | 2350 | 3550 | 2590 | |
| Part Number | H | L | L1 | A | d1 | d | t | H1 | B | S | Basic Load Rating (kN) | Set Screw | Mass (g) | ||||
| Type | D | Cr (Dynamic) | Cor (Static) | M1 | Tightening Torque (N • cm) | Axial Load Capacity (N) | |||||||||||
| PDRCP | 12 | 30.2 | 114 | 87 | 25 | 16 | 12 | 12 | 57 | 22.0 | 6 | 9.55 | 4.8 | M5x0.8 | 240 | 476 | 390 |
| 15 | 30.2 | 114 | 87 | 25 | 16 | 12 | 12 | 57 | 22.0 | 6 | 9.55 | 4.8 | M5x0.8 | 240 | 476 | 380 | |
| 17 | 30.2 | 114 | 87 | 25 | 16 | 12 | 12 | 57 | 22.0 | 6 | 9.55 | 4.8 | M5x0.8 | 240 | 476 | 360 | |
| 20 | 33.3 | 125 | 97 | 27 | 16 | 12 | 13 | 64 | 24.7 | 7 | 12.8 | 6.6 | M5x0.8 | 250 | 1280 | 480 | |
| 25 | 36.5 | 130 | 100 | 29 | 16 | 12 | 13 | 70 | 27.0 | 7.5 | 14.0 | 7.9 | M6x0.75 | 490 | 1400 | 590 | |
| 30 | 42.9 | 156 | 120 | 33 | 21 | 14 | 15 | 83 | 30.3 | 8 | 19.6 | 11.3 | M6x0.75 | 490 | 1960 | 700 | |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Basic Information
| Unit, Type | Ball Bearing Units | Bearing Unit, Type | Pillow Blocks | Bearing Inner Dia. Shape | Set Screw |
|---|---|---|---|---|---|
| Unit Body Material | Cast Iron Class No.30 | Material Bearing | 52100 Bearing Steel | Surface Treatment | Not Provided |
Please check the type/dimensions/specifications of the part PDRCP20 in the Pillow Blocks - Cast, Standard series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| PDR17 |
| PDR20 |
| PDR25 |
| PDR30 |
| PDRCP25 |
| PDRCP30 |
Additional Products in this Category
- Pillow Blocks - Cast, Diamond Flanged
- Cast Iron Pillow Type Unit, Adapter Type, UKP (Adapter sold separately)
- Cast Iron Diamond-Flanged Unit UCFL
- Cast Iron Pillow-Shaped Unit, UKIP
- Cast Iron Pillow-Type Unit UCIP
- Cast Iron Pillow Type Unit, UP
- Stainless Steel Pillow-Type Unit UCSP-H1-S6 UCSPA-H1-S6
- Pillow Block Unit
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy