(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Shaft Collars - D cut, with clamp lever.
- Volume Discount
Integration with Clamp Lever eliminates Clamping Tools and realizes Speedup of Changeover
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Clamp Lever Details >>P.2-1139
Miniature Clamp Lever Details >>P.2-1141
| Type | Shaft Collar | Clamp Lever | Lever Threads | ||||||
| Standard | Compact | ||||||||
| Standard | Miniature | Standard | Miniature | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ S ]Surface Treatment |
| SCDKL | SCDKM | SCDKJL | SCDKJM | 1045 Carbon Steel | Black Oxide Coating | Zinc Diecast | Baked Finish | 1214 Carbon Steel | Black Chromate |
| PSCDKL | PSCDKM | PSCDKJL | PSCDKJM | 1045 Carbon Steel | Electroless Nickel Plating | ||||
| SSCDKL | SSCDKM | SSCDKJL | SSCDKJM | 304 Stainless Steel | - | 303 Stainless Steel | - | ||
Miniature Clamp Lever Details >>P.2-1141
Specifications
| Part Number | - | Lever Color |
| SCJKJL16 SCJKM10 | - - | M S |
■Standard
[ ! ]Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.
[ ! ]Levers in ( ) are applicable to SSCDK# (stainless steel products).
[ ! ]D1 Tolerance for D25 and 30 is ±0.3. [ ! ]C (O.D./I.D. chamfers) will be 1.0 for D30.
| Part Number | Lever Color | B | D1 | M (Coarse) | M1 | d | P1 | (F) | (N) | Y1 | R | W | X | Y | Lever | Standard, Clamp Lever Type: Compliance with Standard | Miniature, Clamp Lever Type: Compliance with Standard | ||||||
| Type | D | SCDKL | PSCDKL | SSCDKL | SCDKM | PSCDKM | SSCDKM | ||||||||||||||||
| Standard Lever Miniature Lever | SCDKL PSCDKL SSCDKL SCDKM PSCDKM SSCDKM | 6 | M (Orange) B (Black) S (Silver Gray) | 18 | 35 | M6 | M3 | 6.6 | 15 | 1.5 | 10 | 7 | 7.5 | 1.5 | 10 | 7 | CLDM#6-16-M/B/S (CLMS#6-16-M/B/S) | - | - | - | ● | ● | ● |
| 8 | 18 | 35 | M6 | M3 | 6.6 | 15 | 1.5 | 10 | 8 | 7.5 | 1.5 | 10 | 7 | CLDM#6-16-M/B/S (CLMS#6-16-M/B/S) | - | - | - | ● | ● | ● | |||
| 10 | 18 | 35 | M6 | M4 | 6.6 | 15 | 1.5 | 9 | 9.5 | 7.5 | 1.5 | 10 | 7 | CLDM#6-16-M/B/S (CLMS#6-16-M/B/S) | ● | ● | ● | ● | ● | ● | |||
| 12 | 18 | 40 | M6 | M4 | 6.6 | 20 | 1.5 | 14 | 11 | 7.5 | 1.5 | 11 | 8 | CLDM#6-16-M/B/S (CLMS#6-16-M/B/S) | ● | ● | ● | ● | ● | ● | |||
| 15 | 18 | 44 | M6 | M5 | 6.6 | 23 | 1.5 | 15 | 13 | 7.5 | 1.5 | 13 | 10 | CLDM#6-20-M/B/S (CLMS#6-20-M/B/S) | ● | ● | ● | ● | ● | ● | |||
| 16 | 18 | 44 | M6 | M5 | 6.6 | 23 | 1.5 | 15 | 14 | 7.5 | 1.5 | 13 | 10 | CLDM#6-20-M/B/S (CLMS#6-20-M/B/S) | ● | ● | ● | ● | ● | ● | |||
| 20 | 18 | 48 | M6 | M5 | 6.6 | 26 | 1.5 | 18 | 16 | 7.5 | 1.5 | 15 | 12 | CLDM#6-25-M/B/S (CLMS#6-25-M/B/S) | ● | ● | ● | - | - | - | |||
| 25 | 18 | 60 | M6 | M5 | 6.6 | 30 | 1.5 | 22 | 19.5 | 7.5 | 1.5 | 18 | 18 | CLDM#6-32-M/B/S (CLMS#6-32-M/B/S) | ● | ● | ● | - | - | - | |||
| 30 | 18 | 70 | M6 | M6 | 6.6 | 35 | 1.5 | 25 | 23 | 7.5 | 1.5 | 21 | 23 | CLDM#6-32-M/B/S (CLMS#6-32-M/B/S) | ● | ● | ● | - | - | - | |||
[ ! ]Levers in ( ) are applicable to SSCDK# (stainless steel products).
[ ! ]D1 Tolerance for D25 and 30 is ±0.3. [ ! ]C (O.D./I.D. chamfers) will be 1.0 for D30.
■Compact
[ ! ]Do not tighten the lever without inserting the shaft. The shaft collar may be deformed and become unusable.
[ ! ]Levers in ( ) are applicable to SSCDKJ# (stainless steel products).
[ ! ]D1 Tolerance for D25 and 30 is ±0.3.
[ ! ]C (O.D./I.D. chamfers) will be 1.0 for D30.
| Part Number | Lever Color | B | D1 | M | M1 | d | P1 | (F) | (N) | Y1 | R | W | X | Y | C | S | Lever | ||
| Type | D | ||||||||||||||||||
| Standard Lever | SCDKJL PSCDKJL SSCDKJL | 8 | M (Orange) B (Black) S (Silver Grey) | 12 | 28 | 5 | M4 Depth 6 | 5.5 | 18 | 0.5 | 12 | 7 | 5.5 | 1.5 | 9.5 | 5.5 | 5 | 5 | CLDM#(CLMS#)5-20-M/B/S |
| 10 | 12 | 28 | 5 | M4 Depth 6 | 5.5 | 18 | 0.5 | 12 | 7 | 5.5 | 1.5 | 9.5 | 5.5 | 5 | - | CLDM#(CLMS#)5-20-M/B/S | |||
| 12 | 12 | 32 | 5 | M4 Depth 6 | 5.5 | 20 | 0.5 | 14 | 8.5 | 5.5 | 1.5 | 10.5 | 7.5 | 5 | - | CLDM#(CLMS#)5-20-M/B/S | |||
| 15 | 12 | 34 | 5 | M4 Depth 6 | 5.5 | 20 | 0.5 | 14 | 10.5 | 5.5 | 1.5 | 11.5 | 8.5 | 5 | - | CLDM#(CLMS#)5-25-M/B/S | |||
| Miniature Lever | SCDKJM PSCDKJM SSCDKJM | 16 | 12 | 36 | 5 | M4 Depth 6 | 5.5 | 22 | 0.5 | 16 | 11 | 5.5 | 1.5 | 12.5 | 8.5 | 5 | - | CLDM#(CLMS#)5-25-M/B/S | |
| 20 | 12 | 42 | 5 | M5 Depth 7.5 | 5.5 | 25 | 0.5 | 18 | 14 | 5.5 | 1.5 | 15.5 | 8.5 | 8 | - | CLDM#(CLMS#)5-25-M/B/S | |||
| 25 | 12 | 48 | 5 | M5 Depth 7.5 | 5.5 | 29 | 0.5 | 22 | 16.5 | 5.5 | 1.5 | 18 | 11 | 8 | - | CLDM#(CLMS#)5-32-M/B/S | |||
| 30 | 12 | 55 | 5 | M5 Depth 7.5 | 5.5 | 30 | 0.5 | 23 | 20 | 5.5 | 1.5 | 20.5 | 13.5 | 8 | - | CLDM#(CLMS#)5-32-M/B/S | |||
[ ! ]Levers in ( ) are applicable to SSCDKJ# (stainless steel products).
[ ! ]D1 Tolerance for D25 and 30 is ±0.3.
[ ! ]C (O.D./I.D. chamfers) will be 1.0 for D30.
Price list
■Standard
| Part Number | Standard, Clamp Lever Type: Available Sizes | Miniature, Clamp Lever Type: Available Sizes | ||||||
| Type | D | SCDKL | PSCDKL | SSCDKL | SCDKM | PSCDKM | SSCDKM | |
| Standard Lever Miniature Lever | SCDKL PSCDKL SSCDKL SCDKM PSCDKM SSCDKM | 6 | - | - | - | |||
| 8 | - | - | - | |||||
| 10 | ||||||||
| 12 | ||||||||
| 15 | ||||||||
| 16 | ||||||||
| 20 | - | - | - | |||||
| 25 | - | - | - | |||||
| 30 | - | - | - | |||||
■Compact
| Part Number | Available Sizes | ||||
| Type | D | SCDKJL SCDKJM | PSCDKJL PSCDKJM | SSCDKJL SSCDKJM | |
| Standard Lever | SCDKJL PSCDKJL SSCDKJL | 8 | |||
| 10 | |||||
| 12 | |||||
| 15 | |||||
| Miniature Lever | SCDKJM PSCDKJM SSCDKJM | 16 | |||
| 20 | |||||
| 25 | |||||
| 30 | |||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PSCDKL12-B |
| PSCDKL12-M |
| PSCDKL12-S |
| PSCDKM12-B |
| PSCDKM12-M |
| PSCDKM12-S |
| SCDKL12-B |
| SCDKL12-M |
| SCDKL12-S |
| SCDKM12-B |
| SCDKM12-M |
| SCDKM12-S |
| SSCDKL12-B |
| SSCDKL12-M |
| SSCDKL12-S |
| SSCDKM12-B |
| SSCDKM12-M |
| SSCDKM12-S |
Loading...
Example
Support Information
Wedge Mechanism Features
- The screws pull a wedge and the shaft is clamped; this structure requires less force for tightening.Good work efficiency; suitable for use in frequent positioning adjustments like width guide applications. The wedge for “With Clamp Lever Type” is made of brass and does not damage shafts.
Click here here for fastening references
Compatible Models
Basic Information
| Tightening Method | One Piece Clamp-On | Features | With Clamp Lever / D-Cut | Side Hole Machining | None |
|---|
Specification/Dimensions
-
For Shaft Size(mm/inch)
-
Width(mm/inch)
-
Material
- 1045 Carbon Steel
- Stainless Steel
-
Surface Finish
- None
- Electroless Nickel
- Black Oxide
-
Width
- Standard Type
- Compact Type
-
Lever Type
- Miniature
- Standard
-
Lever Color
- B (Black)
- M (Orange)
- S (Silver Gray)
-
type
- PSCDKJL
- PSCDKJM
- PSCDKL
- PSCDKM
- SCDKJL
- SCDKJM
- SCDKL
- SCDKM
- SSCDKJL
- SSCDKJM
- SSCDKL
- SSCDKM
-
O.D. (Outside Diameter)(mm/inch)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 5 Days or Less
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Shaft Collars - Threaded I.D., slit.
- Shaft Collars - With key groove, set screw.
- Shaft Collars - Insert lock type, 2 holes.
- Shaft Collars - Keyless bushing type.
- Shaft Collars - Standard, set screw (inch).
- Collars for Shaft - Clamp type, track for bearing fixation (inches).
- Shaft Collars - Threaded internal diameter (inches).
- Shaft Collars - Split, two flat cuts.
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy