(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 8:00 p.m. 4/20/2024 to 5:00 p.m. (CDT) 4/21/2024. We apologize for the inconvenience.
Shaft Collars - Split.
- Volume Discount
- Spec Change
For compact types, aluminum with no surface treatment and celar anodize are added as new. [3/31/23]
Post-Mounting Possible and Easy Maintenance
- inCAD Components
Part Number
Configured Part Number is shown.
[ ! ]For Mount Hole Type, see P.291.
・Materials
[ ! ]Threaded Insert Type of 2017 Aluminum Alloy >> P.274
[ ! ]The halves must remain in the same orientation as shipped when in use.
| Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | ||
| Standard | Compact | Balanced Type | |||
| SCSP | SCSPJ | SCSPB | 1045 Steel | Black Oxide Coating | Hex Socket Head Cap Screw 2 pcs. |
| PSCSP | PSCSPJ | PSCSPB | Electroless Nickel Plating | Hex Socket Head Cap Screw 2 pcs. (Stainless Steel) | |
| SSCSP | SSCSPJ | SSCSPB | 304 Stainless Steel | - | |
| SCNPA | - | 2017 Aluminum Alloy | - | ||
| SCNPAW | - | Clear Anodize | |||
[ ! ]The halves must remain in the same orientation as shipped when in use.
Specifications
| Part Number | - | B |
| SCSP10 SCNPA15 SCSPJ10 SCSPB17 | - - - - | 15 10 6 12 |
| D | B | D1 | M (Coarse) | d | R | X | Y | 1045 Carbon Steel Equivalent | 304 Stainless Steel Equivalent | |||||||||||||||||||
| Black Oxide Coating | Electroless Nickel Plating | - | ||||||||||||||||||||||||||
| Standard | Compact | Balanced Type | Standard | Compact | Balanced Type | Standard | Compact | Balanced Type | Standard | Compact | Balanced Type | Standard | Compact | Balanced Type | Standard | Compact | Balanced Type | SCSP (Standard) | SCSPJ (Compact) | SCSPB (Balanced) | PSCSP (Standard) | PSCSPJ (Compact) | PSCSPB (Balanced) | SSCSP (Standard) | SSCSPJ (Compact) | SSCSPB (Balanced) | ||
| 3- | 8 | 16 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 4.5 | - | - | 2.2 | - | - | ● | - | - | ● | - | - | ● | - | - |
| 4- | 8 | 18 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 5 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - | - |
| 5- | 6 | - | 16 | - | - | M2.6 | - | - | 2.9 | - | - | 2.45 | - | - | 5.5 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 8 | 20 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 5.5 | - | - | 4 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10 | 22 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 6.5 | - | - | 4 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 6- | 6 | - | 18 | - | - | M2.6 | - | - | 2.9 | - | - | 2.45 | - | - | 6 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 8 | 20 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 6 | - | - | 4 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10 | 20 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 6 | - | - | 4 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 8- | 6 | - | 22 | - | - | M2.6 | - | - | 2.9 | - | - | 2.45 | - | - | 7 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 8 | 25 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 8 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10 | 25 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 8 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12 | 30 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 9 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 30 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 9 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10- | 6 | - | 25 | - | - | M2.6 | - | - | 2.9 | - | - | 2.45 | - | - | 8 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 8 | 30 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 9 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10 | 30 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 9 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12 | 30 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 10 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 35 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 10 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12- | 6 | - | 25 | - | - | M2.6 | - | - | 2.9 | - | - | 2.45 | - | - | 9 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 8 | 30 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 10 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 10 | 30 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 10 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12 | 30 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 10 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 35 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 11 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 13- | 8 | - | 28 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 11 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 10 | 30 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 10 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12 | 34 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 11 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 35 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 11 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15- | 8 | - | 30 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 11 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 10 | 34 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 11.5 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 12 | 35 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 12 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 40 | - | M6 | - | 6.6 | - | - | 6 | - | - | 13 | - | 8 | - | ● | - | - | ● | - | - | ● | - | - | |||||
| 16- | 8 | - | 30 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 11.5 | - | - | 3 | - | - | ● | - | - | ● | - | - | ● | - |
| 10 | 35 | - | 35 | M5 | - | M5 | 5.5 | - | 5.5 | 4.5 | - | 4.5 | 12 | - | 12 | 6 | - | 6 | ● | - | ● | ● | - | - | ● | - | - | |
| 12 | 35 | - | 35 | M5 | - | M5 | 5.5 | - | 5.5 | 4.5 | - | 4.5 | 12 | - | 12 | 6 | - | 6 | ● | - | - | ● | - | ● | ● | - | ● | |
| 15 | 40 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 13 | - | - | 8 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 17- | 10 | - | - | 40 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 14 | - | - | 7 | - | - | ● | - | - | ● | - | - | ● |
| 12 | - | - | 40 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 14 | - | - | 7 | - | - | ● | - | - | ● | - | - | ● | |
| 18- | 10 | 40 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 14 | - | - | 7 | - | - | ● | - | - | ● | - | - | ● | - | - |
| 12 | 40 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 14 | - | - | 7 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 15 | 45 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 15 | - | - | 8 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 20- | 8 | - | 35 | - | - | M3 | - | - | 3.4 | - | - | 3 | - | - | 13 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - |
| 10 | 40 | - | 40 | M5 | - | M5 | 5.5 | - | 5.5 | 4.5 | - | 4.5 | 14 | - | 14 | 7 | - | 7 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 12 | 40 | - | 40 | M5 | - | M5 | 5.5 | - | 5.5 | 4.5 | - | 4.5 | 14 | - | 14 | 7 | - | 7 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 15 | 45 | - | 45 | M6 | - | M6 | 6.6 | - | 6.6 | 6 | - | 6 | 15 | - | 15 | 8 | - | 8 | ● | - | ● | ● | - | - | ● | - | ● | |
| 25- | 10 | - | 42 | - | - | M4 | - | - | 4.5 | - | - | 3.75 | - | - | 16.5 | - | - | 5 | - | - | ● | - | - | ● | - | - | ● | - |
| 12 | 45 | - | 45 | M5 | - | M5 | 5.5 | - | 5.5 | 4.5 | - | 4.5 | 17 | - | 17 | 7 | - | 7 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 15 | 50 | - | 50 | M6 | - | M6 | 6.6 | - | 6.6 | 6 | - | 6 | 18 | - | 18 | 10 | - | 10 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 20 | 55 | - | - | M6 | - | - | 6.6 | - | - | 6 | - | - | 20 | - | - | 10 | - | - | ● | - | - | ● | - | - | ● | - | - | |
| 30- | 12 | - | 50 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 20 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - |
| 15 | 55 | - | 55 | M6 | - | M6 | 6.6 | - | 6.6 | 6 | - | 6 | 20 | - | 20 | 10 | - | 10 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 20 | 60 | - | 60 | M8 | - | M8 | 9 | - | 9 | 7 | - | 7 | 23 | - | 23 | 10 | - | 10 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 35- | 12 | - | 55 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 22.5 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - |
| 15 | 60 | - | 60 | M6 | - | M6 | 6.6 | - | 6.6 | 6 | - | 6 | 23 | - | 23 | 12 | - | 12 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 40- | 12 | - | 60 | - | - | M5 | - | - | 5.5 | - | - | 4.5 | - | - | 25 | - | - | 6 | - | - | ● | - | - | ● | - | - | ● | - |
| 18 | 70 | - | 70 | M8 | - | M8 | 9 | - | 9 | 7 | - | 7 | 26 | - | 26 | 13 | - | 13 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 50- | 18 | - | 80 | - | - | M8 | - | - | 9 | - | - | 7 | - | - | 32 | - | - | 15 | - | - | ● | - | - | ● | - | - | ● | - |
| 22 | 85 | - | 85 | M10 | - | M10 | 11 | - | 11 | 9 | - | 9 | 32 | - | 32 | 16 | - | 16 | ● | - | ● | ● | - | ● | ● | - | ● | |
| 60- | 22 | 95 | - | - | M10 | - | - | 11 | - | - | 9 | - | - | 37 | - | - | 18 | - | - | ● | - | - | ● | - | - | ● | - | - |
| 80- | 32 | 130 | - | - | M16 | - | - | 18 | - | - | 13 | - | - | 50 | - | - | 22 | - | - | ● | - | - | ● | - | - | - | - | - |
| 100- | 36 | 150 | - | - | M16 | - | - | 18 | - | - | 13 | - | - | 60 | - | - | 26 | - | - | ● | - | - | ● | - | - | - | - | - |
| D | W | ||
| Standard Type | Compact Type | Balanced Type | |
| 3 | 1 | - | - |
| 4 | 1 | - | - |
| 5 | 1 | 1 | - |
| 6 | 1 | 1 | - |
| 8 | 1.5 | 1.5 | - |
| 10 | 1.5 | 1.5 | - |
| 12 | 1.5 | 1.5 | - |
| 13 | 1.5 | 1.5 | - |
| 15 | 1.5 | 1.5 | - |
| 16 | 1.5 | 1.5 | 1.5 |
| 17 | - | - | 1.5 |
| 18 | 1.5 | - | - |
| 20 | 1.5 | 1.5 | 1.5 |
| 25 | 1.5 | 1.5 | 1.5 |
| 30 | 1.5 | 1.5 | 1.5 |
| 35 | 2 | 2 | 2 |
| 40 | 2 | 2 | 2 |
| 50 | 3 | 3 | 3 |
| 60 | 3 | - | - |
| 80 | 5 | - | - |
| 100 | 5 | - | - |
| D | B | D1 | M (Coarse) | d | R | X | Y | 2017 Aluminum Alloy | |
| - | Clear Anodize | ||||||||
| Standard | Standard | Standard | Standard | Standard | Standard | SCNPA (Standard) | SCNPAW (Standard) | ||
| 3- | 8 | 16 | M3 | 3.4 | 3 | 4.5 | 2.2 | ● | ● |
| 4- | 8 | 18 | M3 | 3.4 | 3 | 5 | 3 | ● | ● |
| 5- | 8 | 20 | M3 | 3.4 | 3 | 5.5 | 4 | ● | - |
| 6- | 8 | 20 | M3 | 3.4 | 3 | 6 | 4 | ● | ● |
| 8- | 8 | 25 | M3 | 3.4 | 3 | 7 | 5 | ● | ● |
| 10- | 10 | 30 | M4 | 4.5 | 3.75 | 9 | 5 | ● | ● |
| 12- | 10 | 30 | M4 | 4.5 | 3.75 | 10 | 5 | ● | ● |
| 13- | 10 | 30 | M4 | 4.5 | 3.75 | 10 | 5 | ● | ● |
| 15- | 10 | 34 | M4 | 4.5 | 3.75 | 11.5 | 6 | ● | ● |
| 16- | 10 | 35 | M5 | 5.5 | 4.5 | 12 | 6 | ● | ● |
| 20- | 10 | 40 | M5 | 5.5 | 4.5 | 14 | 7 | ● | ● |
| 25- | 12 | 45 | M5 | 5.5 | 4.5 | 17 | 7 | ● | ● |
| 30- | 15 | 55 | M6 | 6.6 | 6 | 20 | 10 | ● | ● |
| 35- | 15 | 60 | M6 | 6.6 | 6 | 23 | 12 | ● | ● |
| 40- | 18 | 70 | M8 | 9 | 7 | 26 | 13 | ● | ● |
| 50- | 22 | 85 | M10 | 11 | 9 | 32 | 16 | ● | ● |
| D | W |
| Standard | |
| 3 | 1 |
| 4 | 1 |
| 5 | 1 |
| 6 | 1 |
| 8 | 1.5 |
| 10 | 1.5 |
| 12 | 1.5 |
| 13 | 1.5 |
| 15 | 1.5 |
| 16 | 1.5 |
| 20 | 1.5 |
| 25 | 1.5 |
| 30 | 1.5 |
| 35 | 2 |
| 40 | 2 |
| 50 | 3 |
■Comparison Table of Weight Differences
■Thread Locking Treatment for Balanced Type
• Threads are coated with special plastic with Superior elasticity as well as resistance to abrasion and oil.
• Effect is maximum locking at the first use, and will gradually decrease with each use.
| Part Number | B | Body Weight (g) | Weight with Screws (g) | |||||
| Type | D | Top Half | Bottom Half | Weight Difference | Top Half | Bottom Half | Weight Difference | |
| SCSP (Standard) | 25 | 12 | 45 | 40 | 5 | 48 | 45 | 3 |
| 40 | 18 | 141 | 163 | 22 | 162 | 173 | 11 | |
| SCSPB (Balanced) | 25 | 12 | 43 | 43 | 0 | 47 | 47 | 0 |
| 40 | 18 | 152 | 152 | 0 | 167 | 167 | 0 | |
• Threads are coated with special plastic with Superior elasticity as well as resistance to abrasion and oil.
• Effect is maximum locking at the first use, and will gradually decrease with each use.
[ ! ]Size Comparison Table
| D | Size Differences | Compact Type (P.272) | Standard | |||
| B (Thickness) | D1 (O.D.) | B (Thickness) | D1 (O.D.) | B (Thickness) | D1 (O.D.) | |
| 5 | -2 | -4 | 6 | 16 | 8 | 20 |
| 6 | -2 | -2 | 6 | 18 | 8 | 20 |
| 8 | -2 | -3 | 6 | 22 | 8 | 25 |
| 10 | -2 | -5 | 6 | 25 | 8 | 30 |
| 12 | -2 | -5 | 6 | 25 | 8 | 30 |
| 13 | -2 | -2 | 8 | 28 | 10 | 30 |
| 15 | -2 | -4 | 8 | 30 | 10 | 34 |
| 16 | -2 | -5 | 8 | 30 | 10 | 35 |
| 20 | -2 | -5 | 8 | 35 | 10 | 40 |
| 25 | -2 | -3 | 10 | 42 | 12 | 45 |
| 30 | -3 | -5 | 12 | 50 | 15 | 55 |
| 35 | -3 | -5 | 12 | 55 | 15 | 60 |
| 40 | -6 | -10 | 12 | 60 | 18 | 70 |
| 50 | -4 | -5 | 18 | 80 | 22 | 85 |
Price list
| Part Number | B Selection | Available Sizes | |||||
| SCSP | PSCSP | SSCSP | SCNPA | SCNPAW | |||
| Type | D | ||||||
| (Standard) SCSP PSCSP SSCSP SCNPA (* only) SCNPAW (* only) | 3 | *8 | |||||
| 4 | *8 | ||||||
| 5 | *8 | - | |||||
| 10 | - | - | |||||
| 6 | *8 | ||||||
| 10 | - | - | |||||
| 8 | *8 | ||||||
| 10 | - | - | |||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 10 | 8 | - | - | ||||
| *10 | |||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 12 | 8 | - | - | ||||
| *10 | |||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 13 | *10 | ||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 15 | *10 | ||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 16 | *10 | ||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 18 | 10 | - | - | ||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 20 | *10 | ||||||
| 12 | - | - | |||||
| 15 | - | - | |||||
| 25 | *10 | ||||||
| 15 | - | - | |||||
| 20 | - | - | |||||
| 30 | *15 | ||||||
| 20 | - | - | |||||
| 35 | *15 | ||||||
| 40 | *18 | ||||||
| 50 | *22 | ||||||
| 60 | 22 | - | - | ||||
| 80 | 32 | - | - | - | |||
| 100 | 36 | - | - | - | |||
| Part Number | B | Available Sizes | |||
| Type | D | SCSPJ | PSCSPJ | SSCSPJ | |
| (Compact) SCSPJ PSCSPJ SSCSPJ | 5 | 6 | |||
| 6 | |||||
| 8 | 6 | ||||
| 10 | |||||
| 12 | |||||
| 13 | 8 | ||||
| 15 | 8 | ||||
| 16 | |||||
| 20 | |||||
| 25 | 10 | ||||
| 30 | 12 | ||||
| 35 | |||||
| 40 | |||||
| 50 | 18 | ||||
| Part Number | B | Available Sizes | |||
| Type | D | SCSPB | PSCSPB | SSCSPB | |
| (Balanced) SCSPB PSCSPB SSCSPB | 16 | 10 | - | - | |
| 12 | - | ||||
| 17 | 10 | ||||
| 12 | |||||
| 20 | 10 | ||||
| 12 | |||||
| 15 | - | ||||
| 25 | 12 | ||||
| 15 | |||||
| 30 | 15 | ||||
| 20 | |||||
| 35 | 15 | ||||
| 40 | 18 | ||||
| 50 | 22 | ||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Example
Support Information
Variants and applications - Shaft Collars
| Application | Method of attachment | |||
|---|---|---|---|---|
| Set Screw (Set Screws x2) | One Piece Clamp-on (With set screw) | Two Piece Clamp-On (Set Screws x2) | Clamp Lever | |
| Is thinner than the slotted type. | Avoids damage to the shaft due to the type of fastening. | It is adaptable, ideal for maintenance. Avoid damage to the shaft due to the fastening. | Ideal for places where installation is frequent. | |
| General application |  See models |  See models |  See models |  See models |
 It can be used as a stopper, positioning, pulley fastening, etc. | ||||
| Bearing fixation |  See models |  See models | - | - |
 Clamping of the inner bearing ring. | ||||
| Installation of other parts |  See models |  See models |  See models | - |
 Parts can be joined together as plates. | ||||
| Sensor support |  See models |  See models |  See models |  See models |
 Compatible with passage of sensor holes. | ||||
| Urethane race stoppers | - |  See models |  See models | - |
 Reduces damage and noise. | ||||
Support Information
Other models and applications
| Type | One-touch clamping | Snap fastening | Threaded shaft retainer |
|---|---|---|---|
| Application |  Easy, quick to install and remove |  Snap-on shaft clamping |  Screw type shaft fastening |
| Reference |  |  |  |
| See models here | See models here | See models here |
Compatible Models
Basic Information
| Tightening Method | Two Piece Clamp-On | Features | Standard | Side Hole Machining | None |
|---|
Stock
-
- Stock Item Only
Specification/Dimensions
-
For Shaft Size(mm/inch)
-
O.D. (Outside Diameter)(mm/inch)
-
Width(mm/inch)
-
Material
- 1045 Carbon Steel
- Stainless Steel
- Aluminum
-
Surface Finish
- None
- Electroless Nickel
- Clear Anodized
- Black Oxide
-
Width
- Standard Type
- Compact Type
- Balanced
-
type
- PSCSP
- PSCSPB
- PSCSPJ
- SCNPA
- SCNPAW
- SCSP
- SCSPB
- SCSPJ
- SSCSP
- SSCSPB
- SSCSPJ
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Shaft Collars - Insert lock type, 2 holes.
- Shaft Collars - Set screw, with bearing fixing (inches).
- Shaft Collars - Clamp type, counterbored holes (inches).
- Collars for Shaft - Clamp type, track for bearing fixation (inches).
- Shaft Collars - With damper, split (inch).
- Shaft Collars - Resin, grooved.
- Shaft Collars - D cut.
- Shaft Collars - Slit, 2 side holes.
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy