(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 12/14/2024 to 4:00 p.m. (CST) 12/15/2024. We apologize for the inconvenience.
Single Axis Actuators - LST10 Series, Driven by Belt.
- New Products
By using this type of mechanism by means of a belt you can achieve a long stroke and high transfer speed, and positioning at low cost, stroke from 500mm to 1000mm.
Part Number
Configured Part Number is shown.
![[Medium Accuracy] Single Axis Actuators LST10 (Driven by Belt):Related Image](http://mx.misumi-ec.com/en/linked/item/10302634130/img/drw_03.gif)
![[Medium Accuracy] Single Axis Actuators LST10 (Driven by Belt):Related Image](http://mx.misumi-ec.com/en/linked/item/10302634130/img/drw_02.gif)
* When a unit of Belt Driving Type is purchased for the first time, this product needs to be purchased as well.
LST10
[ ! ]The Motor Bracket and Adapter Plate are not installed yet when being shipped from the factory.
[ ! ]The motor bracket can be mounted on either the right side or the left side.
| [ A ]Accessory | [ M ]Material | [ S ]Surface Treatment | Quantity | Note |
| Motor Bracket | Aluminum Alloy | Gold Anodize | 1 | - |
| Spacer | Aluminum Alloy | Black Anodize | 2 | - |
| Hex Socket Head Cap Screw M4×20 |
Steel | Black Oxide | 4 | Motor Bracket For fixing Adapter Plate |
| Adapter Plate | Aluminum Alloy | Black Anodize | 1 | - |
| Hex Socket Head Cap Screw M3×8 |
Steel | Black Oxide | 4 | Adapter Plate For fixing Adapter Plate |
[ ! ]The motor bracket can be mounted on either the right side or the left side.
JIGLST10
Material
[ M ] Aluminum Alloy
[ S ] Clear Anodize
Material
[ M ] Aluminum Alloy
[ S ] Clear Anodize
Specifications
| Part Number | - | Stroke | - | Motor Adapter Plates |
| LST10 | - | 500 | - | A25 |
| Part Number |
| JIGLST10 |
| Part Number | Stroke (mm) | Motor Adapter Plates | L | A | Mass (kg) | Number of Holes (N) | Travel per Pulley Rotation (mm) | Base Mounting |
| LST10 | 500 | (Servo Motor) A25 A38 A40 E40 (Stepping Motor) T28, T42, T56.4 (No Adapter Plate) N | 700 | 500 | 3.3 | 12 | 59.97 | From the Top of Base Rail (Counterbored Hole) |
| 600 | 800 | 600 | 3.7 | 14 | ||||
| 700 | 900 | 700 | 4.1 | 16 | ||||
| 800 | 1000 | 800 | 4.5 | 18 | ||||
| 900 | 1100 | 900 | 4.9 | 20 | ||||
| 1000 | 1200 | 1000 | 5.3 | 22 |
- Accuracy Standards
[ ! ]The standard values are measured after the rail is mounted.
(it is not the value measured before the rails are bolted down.)
| Accuracy Standards | Standard Value |
| Positioning Repeatability (mm) | ±0.05 |
| Running Parallelism (mm) | ±0.05 |
(it is not the value measured before the rails are bolted down.)
- Stepping Motor Application Table
[ ! ]The NEMA standard is standardized by National Electrical Manufactures Association in U.S.
[ ! ]Not compatible with geared motors made by Oriental Motor.
| Part Number | Flange Size | Manufacturer | Product Number | Wattage | Recommended Coupling |
| T28 | 28 | Oriental Motor | CSK22 | 2-phase | SCXW21 SCPW21 CPDW19 |
| CSK52 | 5-phase | ||||
| ASC3 | a- Step | ||||
| T42 | 42 | PK24 | 2-phase | ||
| CSK24 | |||||
| RK54 | 5-phase | ||||
| RKS54/PK54 | |||||
| AS46,ASC46,AR46 | a- Step | ||||
| T56.4 | 56.4 | NEMA standards | NEMA23 | - | CPDW19 |
[ ! ]Not compatible with geared motors made by Oriental Motor.
- Servo Motor Application Table
[ ! ]Product numbers and specifications of motors are subject to change.
Please check the manufacturers' information.
[ ! ]Applicable motors and couplings are not limited to the above listed products.
Please confirm each mounting dimension.
| Part Number | Flange Size | Manufacturer | Product Number | Wattage | Recommended Coupling |
| A25 | 25 | Yasukawa Electric Corporation | SGMMJ-A1 | 10W | SCXW21 SCPW21 CPDW19 |
| SGMMJ-A2 | 20W | ||||
| SGMMJ-A3 | 30W | ||||
| Mitsubishi Electric Corporation | HG-AK0136 | 10W | |||
| HG-AK0236 | 20W | ||||
| HG-AK0336 | 30W | ||||
| A38 | 38 | Panasonic | MSMD5A | 50W | |
| MSME5A | |||||
| MSMD01 | 100W | ||||
| MSME01 | |||||
| A40 | 40 | Yasukawa Electric Corporation | SGMJV-A5 | 50W | |
| SGMAH-A5 | |||||
| SGMAS-A5 | |||||
| Mitsubishi Electric Corporation | HG-MR053 | ||||
| HG-KR053 | |||||
| HF-KP053 | |||||
| Sanyo Denki Co., Ltd. | Q1AA04003D | 30W | |||
| Q1AA04005D | 50W | ||||
| Omron Corporation | R88M-K05030 | ||||
| Keyence Corporation | MV-M05 | ||||
| SV-M005 | |||||
| E40 | 40 | SIEMENS | 1FK7011-5 | 50W | CPDW19 |
| 1FK7015-5 | 100W |
Please check the manufacturers' information.
[ ! ]Applicable motors and couplings are not limited to the above listed products.
Please confirm each mounting dimension.
Alterations
![[Medium Accuracy] Single Axis Actuators LST10 (Driven by Belt):Related Image](http://mx.misumi-ec.com/en/linked/item/10302634130/img/alt_02.gif)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LST10-[500,600,700,800,900,1000]-A[25,38,40] |
| LST10-[500,600,700,800,900,1000]-E40 |
| LST10-[500,600,700,800,900,1000]-N |
| LST10-[500,600,700,800,900,1000]-T[28,42,56.4] |
Loading...
Example
![[Medium Accuracy] Single Axis Actuators LST10 (Driven by Belt):Related Image](http://mx.misumi-ec.com/en/linked/item/10302634130/img/exp_01.gif)
Basic Information
| Cost Efficient | Cost Efficient | Main Body, Peripheral Components | Main Body | Precision | Standard Grade |
|---|---|---|---|---|---|
| Table | Long 1 pc. | Motor Mounting Orientation | Fold Back | Cover | Included |
| Grease | Standard | With or w/o Motors | Not Provided (Installed by customers) | With or w/o Lubricant Unit | Not Provided |
| With or w/o Retainer | Not Provided | Table Width(mm) | 62 | Supply Voltage | Not Provided |
| Drive Method | Belts | Slider Material | Aluminum | Slider Surface Finish | Black Anodize |
| Basic Load Rating, Dynamic Rating(N) | 4900 | Basic Load Rating, Static Rating(N) | 9700 | Allowable Static Moment MP(N•m) | 48.4 |
| Allowable Static Moment MY(N•m) | 48.4 | Allowable Static Moment MR(N•m) | 75.7 | Positioning Repeatability(µm) | ±50 |
| Running Parallelism(µm) | ±50 | Operating Ambient Temperature(℃) | 0::50 | Maximum Velocity(mm/s) | 400 |
Specification/Dimensions
-
Table Length(mm)
-
Motor Adapter Plate (For Servo Motor) [A]
-
Motor Adapter Plate (For Servo Motor) [E]
-
Motor Adapter Plate (For Stepping Motor) [T]
-
Stroke [L](mm)
-
type
- LST10
-
CAD
- 2D
- 3D
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Single Axis Actuators - LX20 Series with Optional Cover.
- Single Axis Actuators - LX30 Series with Parallel Motor Mount.
- Engine Centering Tools - LX26 Series.
- Engine Centering Tools - LX45 Series.
- Engine Centering Tools - LX20 Series.
- Single Axis Actuators - LS10 Series, Driven by Ball Screw.
- Precision Positioning Table - TU Series.
- Precision Positioning Table - TE-B Series.
Complementary Products
-
Single Axis Units - Rolled or Precision Ball Screws, Stepping or Servo Motor, with Cover
MISUMI Days to Ship : 15 Days or more
-
Single Axis Actuators - LX30 Series with Parallel Motor Mount.
MISUMI Days to Ship : 13 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy