(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Miniature Linear Guides - Standard block, available with constant lubrication unit. (SSEB10-55)

Miniature Linear Guides - Standard block, available with constant lubrication unit.
  • New Products

Miniature stainless steel linear guides with standard block. It is one of the most used models in different applications. Configurable preload and precision. Selectable lubricant type, even with MX constant lubrication accessory. Blocks and rails cannot be purchased separately.

  • inCAD Components

(i)Caution

  • The appearance of this product has changed as of September 2017.
    About Misumi Linear Guide Exterior Change
  • Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Specifications

Miniature Linear Guides - Standard Block:Related Image

For L Configurable, G dimensions differ from those shown in the table below. For details, Click here.

Part NumberL
Block DimensionGuide Rail Dimension
TypeMXHWL1BCSxℓL2KCbW1W2H1CaCounterbored HoleFG
d1xd2xh
SSEB
SSE2B
SSEBL
SSE2BL
SSEBV
SSE2BV
SSEBLV
SSE2BLV
SSEBZ
SSE2BZ
SSEBLZ
SSE2BLZ
-625~100
(70)
1217.48-M2x1.59.74.50.353.540.32.4x3.5x1155
840~130
(70)
1723.6128M2x2.513.66.50.3754.70.32.4x4.2x2.3155
Blank: None
-MX: Provided
1035~275
(75)
20301510M3x3197.80.395.55.50.33.5x6x3.5207.5
1345~470
(95)
2733.92015M3x3.519.9100.5127.57.50.53.5x6x4.52510
1670~670
(110)
3242.42520M3x427.4120.5158.59.50.53.5x6x4.54015
20100~700
(160)
40503025M4x634.6150.52010110.56x9.5x5.56020
L Dimension: Dimensions in () are for the minimum rail length of the 2-Block Type
For High Grade, the available lengths are the following H8: 145-265, H10: 295-355, H13: 495-720.

Materials

 Material
 Hardness
TypeMX
(Lubrication Unit)
L DimensionNumber of Blocks
Light PreloadSlight Clearance
High GradePrecision GradeStandard Grade
Stainless Steel
56HRC min.
SSEBSSEBVSSEBZBlank: None
-MX: Provided
Selectable1
SSE2BSSE2BVSSE2BZ2
SSEBLSSEBLVSSEBLZConfigurable1
SSE2BLSSE2BLVSSE2BLZ2
Heat Resistant Temperature: -20 ~ 80°C
 H6 has no standard grade / precision grade.
 
Part Number-L 
SSEB10
Miniature Linear Guides - Standard Block:Related ImageRSEB10
Miniature Linear Guides - Standard Block:Related ImageSSEB10L
Miniature Linear Guides - Standard Block:Related ImageSSEB10G
-
-
-
-
275
75
75
75

(Low Temperature Black Chrome Plating)
(L Type Greased)
(G Type Greased)
Low Temperature Black Chrome Plating and various Grease types available as alternative.
For Days to Ship, Price and Performance, >> P.531
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (after fastening screws on the rail and pushing it onto the datum plane).Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H6 comes with Number 0, Class 1 Phillips button head screws (M2x6).
· H8 comes with cap screws (M2x6).

■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).

Alterations

Miniature Linear Guides - Standard Block:Related Image

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
SSEB10-55
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSSet / Single Item Block Type Rail Type Rail Width W1
(mm)
Unit Height H
(mm)
No. of Blocks Material Rail Length L
(mm)
Preload Accuracy Nominal Part Number Ball Arrangement Retainer Rolling Element Basic Load Rating: Dynamic Load
(N)
Basic Load Rating: Static Load
(N)
Allowable Static Moment MA
(N⋅m)
Allowable Static Moment MB
(N⋅m)
Allowable Static Moment MC
(N⋅m)
Lubrication Type L Dimension Type
1 Piece(s)

12 Days or more

10Set[Standard] Standard BlockStandard9101Stainless Steel55[Light Preload] Light PreloadHigh Grade9Miniature TypeN/ABall150025005.15.110.2Lithium Base Grease (Standard)Standard Type

Loading...

  1. 1

More Information

Miniature Linear Guides - Standard Block:Related Image
Miniature Linear Guides - Standard Block:Related Image
Miniature Linear Guides - Standard Block:Related Image
Miniature Linear Guides - Standard Block:Related Image
■Selectable Shortest Rail Length for B3/B4
HB3
(3-block)
B4
(4-block)
685-
885115
10115155
13145170
16190230
20220280
[ ! ]For calculation of L Dimension Configurable Type pricing, please use the Misumi website. http://www.misumiusa.com/lg-bs_software/
 

Frequently asked questions (FAQ)

質問: Are the block's ball bearings retained?
回答: Yes, all ball bearings are retained on Misumi linear guides.
質問: What is the seal material of you miniature linear guides?
回答: Nitrile Rubber (NBR).

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support