(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Ball Screws - Screw diameter 12mm or 15mm, compact nut.
Shaft Diameter 15, Lead 5 or 10, Compact Nut
- inCAD Components
Part Number
Configured Part Number is shown.
BSSC1204-[150-800/1]
・Materials
| Nut Type | Type | Accuracy Grade | Shaft Dia. | Lead | Screw Shaft | Nut | |||||
| Standard | F, P Configurable | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | ||||
| Compact Nut | BSSC | BSSCK | C10 | 12 | 4 | 1055 Carbon Steel | Induction Hardened 56~62HRC | - | JIS SCM420H | Carburized 58~62HRC | - |
| 15 | 5, 10 | ||||||||||
* Included Collar
[ M ] Material: 1045 Carbon Steel
[ S ] Surface Treatment: Black Oxide
[ M ] Material: 1045 Carbon Steel
[ S ] Surface Treatment: Black Oxide
* Included Collar
[ M ] Material: 1045 Carbon Steel
[ S ] Surface Treatment: Black Oxide
[ M ] Material: 1045 Carbon Steel
[ S ] Surface Treatment: Black Oxide
Specifications
| Part Number | - | L | - | F | - | P |
| BSSC1204 | - | 300 | ||||
| BSSCK1505 | - | 300 | - | F15 | - | P6 |
| Nut Type | Accuracy Grade | Part Number | 1mm Increment | Y | A | B | Ball Dia. | Ball Center Dia. | Screw Root Dia. | Number of Circuits | Basic Load Rating | Axial Play | Twisting Direction | |||||
| Type | Screw Shaft O.D. | Lead | L | *F | *P | C (Dynamic) kN | Co (Static) kN | |||||||||||
| Compact Nut | C10 | BSSC | 12 | 04 | 150~800 | 15 | 8 | L-65 | - | - | 2 | 12.25 | (10.4) | 4 turns, 1 row | 2.79 | 5.27 | 0.05 or Less | Right |
| BSSCK | 15~24 | 5~8 | L-(50+F) | |||||||||||||||
| BSSC | 15 | 05 | 150~1200 | 15 | 10 | L-67 | 33 | 22 | 3.175 | 15.5 | (12.25) | 3 turns, 1 row | 4.14 | 7.06 | 0.10 or Less | |||
| BSSCK | 15~30 | 6~10 | L-(52+F) | |||||||||||||||
| BSSC | 10 | 200~1200 | 15 | 10 | L-67 | 48 | 37 | 4.25 | 7.45 | |||||||||
| BSSCK | 15~30 | 6~10 | L-(52+F) | |||||||||||||||
| * F and P are configurable for BSSCK only. [ ! ]F≤Px3 kgf=Nx0.101972 | ||||||||||||||||||
Price list
| Nut Type | Accuracy Grade | Part Number | Unit Price 1~4 pc(s). | |||||
| L150~200 | L201~400 | L401~600 | L601~800 | L801~900 | L901~1200 | |||
| Compact Nut | C10 | BSSC1204 | 11,630 | 11,630 | 12,730 | 14,800 | - | - |
| BSSC1505 | 12,980 | 13,400 | 13,830 | 14,940 | 15,660 | 16,830 | ||
| BSSC1510 | 12,980 | 12,980 | 13,220 | 14,570 | 15,300 | 15,850 | ||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
More Information
■Combination with Support Units
| Ball Screw Part Number | Recommended Support Unit | |||||||
| Type | Screw Shaft O.D. | Lead | Part Number | Shape | Fixed Side | Support Side | Page | |
| Type | No. | |||||||
| BSSC | 12 | 04 | BSV | 10S | Square Low Profile | ○ | >> Click here | |
| BUV | 10 | ○ | >> Click here | |||||
| BRW | 10S | Round | ○ | >> Click here | ||||
| BUR | 10 | ○ | >> Click here | |||||
| 15 | 05 10 | BSV | 12 | Square Low Profile | ○ | >> Click here | ||
| BUV | 12 | ○ | >> Click here | |||||
| BRW | 12 | Round | ○ | >> Click here | ||||
| BUR | 12 | ○ | >> Click here | |||||
■Combination with Nut Brackets
| Ball Screw Part Number | Recommended Nut Bracket | ||||
| Type | Screw Shaft O.D. | Lead | Part Number | Page | |
| Type | No. | ||||
| BSSC | 12 | 04 | BNFB BNFM BNFR BNFA | 1204C | >> Click here |
| 15 | 05 | 1505C | >> Click here | ||
| 10 | 1510C | >> Click here | |||
■Notes
[ ! ]Filled with lithium soap based grease (Alvania Grease S2 made by Showa Shell Sekiyu K.K).
[ ! ]For accuracy of Ball Screws, see >> Click here, >> Click here
[ ! ]For details of Support Units, see >> Click here~ >> Click here
[ ! ]Cautions: Do not let the nuts overrun its stroke or remove the nuts from the screw shafts.
It may cause the balls to fall out or damage the ball recirculation parts.
[ ! ]Included Collar is packaged together with main body of Ball Screws. Store this Included Collar with care since it is required when mating with Support Units.
[ ! ]Do not tilt the ball screw assembly since the nut may rotate off from the shaft due to its own weight.
[ ! ]Filled with lithium soap based grease (Alvania Grease S2 made by Showa Shell Sekiyu K.K).
[ ! ]For accuracy of Ball Screws, see >> Click here, >> Click here
[ ! ]For details of Support Units, see >> Click here~ >> Click here
[ ! ]Cautions: Do not let the nuts overrun its stroke or remove the nuts from the screw shafts.
It may cause the balls to fall out or damage the ball recirculation parts.
[ ! ]Included Collar is packaged together with main body of Ball Screws. Store this Included Collar with care since it is required when mating with Support Units.
[ ! ]Do not tilt the ball screw assembly since the nut may rotate off from the shaft due to its own weight.
Technical Information
Applications for different types of grease
Grease Performance
| Type | Product Name | Main Characteristic |
|---|---|---|
| Type L | ET-100K (Made by Kyodo Yushi) | Excels in heat resistance, oxidation stability, and adhesion. In addition, splash or leakage is reduced. |
| Type G | LG2 (Made by NSK Ltd.) | Special grease for linear guides, ball screws and etc. for clean-room use. |
Keyway Dimension Details
Located at P on Fixed Side Shaft End
| Shaft Diameter | b | t | ||
|---|---|---|---|---|
| Ref. Dim. | Tol. (N9) | Ref. Dim. | Tol. | |
| 6-7 | 2 | -0.004 -0.029 | 1.2 | +0.1 0 |
| 8-10 | 3 | 1.8 | ||
| 11-12 | 4 | 0 -0.03 | 2.5 | |
| 13-17 | 5 | 3.0 | ||
| 18-20 | 6 | 3.5 | ||
Peripheral Components
Combination of the following parts are available.
| Support Units (Square, Low Profile) | Support Units (Round) | Nut Brackets (Block Type) | Assembly Example |
|---|---|---|---|
 |  |  |  |
Combination with Support Units and Nut Bracket
Combination with Support Units
| Ball Screw Part Number | Recommended Support Unit | |||||||
|---|---|---|---|---|---|---|---|---|
| Type | Screw Shaft Outer Diameter | Lead | Part Number | Shape | Fixed Side | Support Side | Link | |
| Type | No. | |||||||
| BSSC | 12 | 04 | BSV | 10S | Square | ⚬ | - | Detail here |
| BUV | 10 | Low Profile | - | ⚬ | Detail here | |||
| BRW | 10S | Round | ⚬ | - | Detail here | |||
| BUR | 10 | - | ⚬ | Detail here | ||||
| 15 | 05 10 | BSV | 12 | Square | ⚬ | - | Detail here | |
| BUV | 12 | Low Profile | - | ⚬ | Detail here | |||
| BRW | 12 | Round | ⚬ | - | Detail here | |||
| BUR | 12 | - | ⚬ | Detail here | ||||
*Aside from the part numbers shown above, there are a variety of other Support Units available.
Combination with Nut Bracket
| Ball Screw Part Number | Recommended Nut Brackets | ||||
|---|---|---|---|---|---|
| Type | Screw Shaft Outer Diameter | Lead | Part Number | Link | |
| Type | No. | ||||
| BSSC | 12 | 04 | BNFB | 1204C | Detail here |
| BNFM | |||||
| 15 | 05 | BNFR | 1505C | Detail here | |
| 10 | BNFA | 1510C | Detail here | ||
Support Information
Mounting Method Type
| Installation Methods | Speed | Accuracy | Suggested Support Unit |
|---|---|---|---|
 | Intermediate – High Speed Applications * Most commonly selected installation method | Intermediate Speed Applications | Low Speed Applications * For short shaft length |
 | Medium – High | High | Medium |
 | Standard Type BRW and BUR were selected. | Standard Type BRW was selected. | BRWE Type was selected. |
For more details, click here.
Precision Ball Screws
Standard values for variations within 300mm of effective thread length (V300) and in one revolution (V2π) for Positioning Screws (JIS B 1192-1997, C accuracy grade series).
| Precision Grade | C3 | C5 | ||
|---|---|---|---|---|
| Item | V300 | V2π | V300 | V2π |
| Standard value | 8 | 6 | 18 | 8 |
Unit:μm
Standard values for variations within 300 mm of effective thread length (V300) for Transfer Screws (JIS B 1192-1997, Ct accuracy grade series).
| Precision Grade | Ct7 | Ct10 |
|---|---|---|
| V300 | 50 | 210 |
Unit:μm
[!]Actual Mean Travel Error (ep) for Transfer Screws (JIS B 1192-1997, Ct accuracy grade series) is obtained:
| Term | Symbol | Meaning |
|---|---|---|
| Actual Mean Travel Error | ep | Difference between Actual Mean Travel and Specified Travel. |
| Variation | V300 | Variation for a 300 mm span arbitrarily taken from the effective thread length. |
| V2π | Variation for an arbitrary 1 revolution (2πrad). | |
| Length | Lu | Screw Effective Length. |
For more details, click here.
Cautions
(1) Removing the ball nut from the screw shaft causes the ball to fall out rendering the ball screw unusable. Do not disassemble Ball Screws.
It may attract dusts and degrade assembly accuracy.
Use dedicated temporary shafts when removing Ball Nuts.
(2)Do not let a ball screw nut overrun. It may cause the balls to fall out or damage the ball recirculation parts.
(3) Do not tilt the ball screw assembly since a ball screw nut may spin off from a screw shaft due to its own weight.
Especially when using a ball screw vertically, place a fall-off prevention mechanism since a ball screw nut may spin off due to its own weight
(1) Do not remove the Nut
(2) Do not let a nut overrun
(3) Caution for free fall
Compatible Models
Basic Information
| Cost Efficient | Standard | Type | Rolled | Flange Shape | Compact Flange |
|---|---|---|---|---|---|
| Accuracy Grade | C10 | Screw Shaft O.D.(φ) | 12 | Lead(mm) | 4 |
| Preload | No Preload | Nut Type | Standard Nuts | Operating Condition | Standard |
| Twisting Direction | Right | Axial Play | 0.05 or Less | Nut Structure | Single |
| Recirculating Method | End Deflector Type | Number of Circuits(Rows X Turns) | 1×4 | Basic Load Rating, Dynamic Rating(N) | 2790 |
| Basic Load Rating, Static Rating(N) | 5270 | Grease Type | Standard | Shaft End Length F(mm) | 15 |
| Shaft Dia. P(φ) | 8 | Shaft End Dimension (Fixed, Configurable) | Fixed | Nut Size | Compact |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: What is the allowable temperature range of your ballscrews?
- 回答: The standard allowable temperature range is 0°C to 80°C.
- 質問: Can I buy the nut or shaft separately?
- 回答: No, we do not offer the nut or shaft separately. The ball bearings inside the nut are sized to match each shaft to ensure proper clearance ranges.
- 質問: What grease is used for your Ball Screws?
- 回答: The standard grease is Alvania Grease S2 made by Showa Shell Sekiyu K.K. It is an EP 2 lithium bearing grease.
- 質問: What is the recommended lubrication schedule?
- 回答: As a rule of thumb, 100 km of linear travel is a good starting point for determining a lubrication schedule. The final schedule should be determined by the customer based on their specific appliation details (load, speed, temperature, contamination ,etc) and application experience.
- 質問: Do you offer food grade grease?
- 回答: No, we do not offer food grade grease as a standard option for ball screws.
- 質問: What does the dynamic load rating mean?
- 回答: The basic dynamic load rating (Ca) is used to calculate the service life of a ball screw in motion with its ball screw nut under an axial load. The basic dynamic load rating Ca means an axial load at which 90% of a group of identical ball screw units independently operating under the same conditions achieve a rated load of 10^6 revs (1 million revolutions) without causing flaking.
- 質問: Do you offer screws with right and left hand threads?
- 回答: We do not offer right and left hand threads on the same shaft as standard. For large volumes, it may be a custom option. Please contact engineering with application details.
- 質問: What is the difference between pitch and lead?
- 回答: The pitch is the distance between successive crests of the thread of a screw. The lead is the axial distance traveled by a screw in one turn.
- 質問: How does temperature increase affect the Ball Screw?
- 回答: An increase in the screw shaft temperature of 1°C expands the shaft by 12μm per meter. For this reason, although the lead of the Ball Screw is machined to a very high degree of precision, the thermal deformation caused by a temperature increase may reduce positioning accuracy.
Additional Products in this Category
- Ball Screws - Screw diameter 8 mm, pitch 2 or 4 millimeters.
- Ball Screws - Screw diameter 20mm, pitch 5, 10 or 20 millimeters.
- Ball Screws - Screw diameter 25mm, pitch 5, 10 or 25 millimeters.
- Ball Screws - Screw diameter 28mm or 32mm, pitch 6, 10 or 32 millimeters.
- Precision Ball Screws - Screw diameter 1mm, pitch 2, 4 or 10 millimeters.
- Precision Ball Screws - Screw diameter 15mm, pitch 5, 10 or 20 millimeters.
- Precision Ball Screws - Screw diameter 25mm, pitch 5, 10 or 20 millimeters.
- Spindle Stops - Polyurethane.
Complementary Products
-
Ball Screw Support Unit - For the assembly of Ball Screws with Motors.
MISUMI Days to Ship : 8 Days or more
-
Ball Screw Support Unit - Fixed Side, Block Type, with Holes for Dowell Bolts.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy