(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
•Style: Oversized Pin
•Shaft End Shape: Tapped
•Material: 440C Stainless Steel
•Type: Straight/Dual-Fit
•Type: Straight
Part Number
Configured Part Number is shown.
MSTM5-15
Type | D Tolerance | [ M ]Material | [ H ]Hardness |
MST | p6 | 52100 Bearing Steel | 45~50HRC |
MSTM | m6 | ||
MSTMS | 440C Stainless Steel |
Part Number | - | L |
MSTP5 MSTMS6 | - - | 10 20 |
ℓ1 | ℓ2 | M x P | ℓ | Dp6 | Part Number | L | ||||||||||||
Type | D | |||||||||||||||||
1.5 | 0.5 | 3 x 0.5 | 6 | +0.020 +0.012 | MST p6 (Type) | 5 | 10 | 15 | 20 | 25 | 30 | |||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||
10 | 15 | 25 | 35 | 40 | 50 | |||||||||||||
5 x 0.8 | +0.024 +0.015 | 8 | 30 | |||||||||||||||
15 | 20 | 25 | 35 | 40 | 45 | 50 | 60 | |||||||||||
70 | 80 | |||||||||||||||||
2.5 | 6 x 1.0 | 10 | 10 | 40 | ||||||||||||||
15 | 20 | 25 | 30 | 35 | 45 | 50 | 60 | 70 | ||||||||||
80 | ||||||||||||||||||
1.0 | +0.029 +0.018 | 12 | 20 | 30 | 40 | 50 | 60 | 70 | ||||||||||
80 | ||||||||||||||||||
8 x 1.25 | 15 | 13 | 50 | |||||||||||||||
40 | 60 | 70 | ||||||||||||||||
80 | ||||||||||||||||||
3.0 | 16 | 60 | ||||||||||||||||
40 | 50 | 70 | 80 | |||||||||||||||
10 x 1.5 | 18 | +0.035 +0.022 | 20 | 50 | 60 | 70 | 80 |
ℓ1 | ℓ2 | M x P | ℓ | Dm6 | Part Number | L | ||||||||||||
Type | D | |||||||||||||||||
1.5 | 0.3 | 3 x 0.5 | 6 | +0.012 +0.004 | MSTM m6 (Type) | 5 | 10 | 15 | 20 | 25 | 30 | |||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||
10 | 15 | 25 | 35 | 40 | 50 | |||||||||||||
0.5 | 5 x 0.8 | +0.015 +0.006 | 8 | 30 | ||||||||||||||
15 | 20 | 25 | 35 | 40 | 45 | 50 | 60 | |||||||||||
70 | 80 | |||||||||||||||||
2.5 | 6 x 1.0 | 10 | 10 | 40 | ||||||||||||||
15 | 20 | 25 | 30 | 35 | 45 | 50 | 60 | 70 | ||||||||||
80 | ||||||||||||||||||
1.0 | +0.018 +0.007 | 12 | 20 | 30 | 40 | 50 | 60 | 70 | ||||||||||
80 | ||||||||||||||||||
8 x 1.25 | 15 | 13 | 50 | |||||||||||||||
40 | 60 | 70 | ||||||||||||||||
80 | ||||||||||||||||||
3.0 | 1.5 | 16 | 60 | |||||||||||||||
40 | 50 | 70 | 80 | |||||||||||||||
10 x 1.5 | 18 | +0.021 +0.008 | 20 | 50 | 60 | 70 | 80 |
ℓ1 | ℓ2 | M x P | ℓ | Dm6 | Part Number | L | ||||||||||||
Type | D | |||||||||||||||||
1.5 | 0.3 | 3 x 0.5 | 6 | +0.012 +0.004 | MSTMS m6 (Type) | 5 | 10 | 15 | 20 | |||||||||
2.0 | 4 x 0.7 | *8 | 6 | 20 | 30 | |||||||||||||
10 | 15 | 25 | ||||||||||||||||
0.5 | 5x0.8 | +0.015 +0.006 | 8 | 30 | ||||||||||||||
15 | 20 | 25 | 35 | 40 | ||||||||||||||
6x1.0 | 10 | 20 | 25 | 30 | 35 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Loading...
Shape | Straight/Parallel Joggling | Style | Positive Tolerance | Shaft End Shape | Internal Thread |
---|---|---|---|---|---|
Type | Straight | End Shapes | Both Sides Tapered | Tapped Holes | One Side Tapped |
Air Vent | Provided |
Please check the type/dimensions/specifications of the part MSTM5-15 in the Dowel Pins - Straight, Oversized, Single Side Tapped series.
Part Number |
---|
MST10-30 |
MST10-35 |
MST10-40 |
MSTM5-20 |
MSTM5-25 |
MSTM5-30 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy