(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Timing Pulleys - High torque, high positioning accuracy, GT5 series. (GPA50GT5120-A-N15)

Timing Pulleys - High torque, high positioning accuracy, GT5 series.
  • Spec Change

Circular Tooth Profile Pulleys with little backlash, suitable for positioning.

  • METRIC
  • inCAD Components

(i)Caution

  • Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

PDFP.2019-1348

Unit examples related to this product

Part Number

Configured Part Number is shown.

GPA50GT5120-A-N15


・Materials
Catalog No.[ M ] Material[ S ]
Surface Treatment
Belt Width 9mmBelt Width 12mmBelt Width 15mmPulleyFlange
A:10.3 W:14.0 L:22.0A:13.3 W:17.0 L:25.0A:16.3 W:20.0 L:28.0
GPA__GT5090GPA__GT5120GPA__GT5150Aluminum AlloyAluminum AlloyClear Anodize
GPT__GT5090GPT__GT5120GPT__GT51501045 Carbon Steel
or Equivalent
Low Carbon Steel-
GPM__GT5090GPM__GT5120GPM__GT5150Black Oxide
[ ! ]Flanges are installed. Set screws are included with P & N bore hole specification.
 

Specifications

High Torque Timing Pulleys - 5GT:Related Image

Alterations

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
GPA50GT5120-A-N15
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSBelt Width Used(mm)
(mm)
Number of Teeth
(T)
Pulley Shape Material Surface Treatment 01.[H] Shaft Bore Spec. (Round Hole)
(mm)
02.[P] Shaft Bore Spec. (Round Hole + Tap)
(mm)
03.[N] Shaft Bore Spec. (New JIS Keyway Hole + Tap)
(mm)
04.[NK] Shaft Bore Spec. (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) 06.[V] Shaft Bore Spec. (Stepped Hole)
(mm)
07.[F] Shaft Bore Spec. (Stepped Hole: Counterbored Holes on the Hub Side)
(mm)
08.[Y] Shaft Bore Spec. (Both Ends Stepped Hole)
(mm)
09.[WB] Shaft Bore Spec.(Add Two Stepped Holes)
(mm)
1 Piece(s)

9 Days or more

101250Shape A[Aluminum] Aluminum Alloy 2000 seriesClear Anodize--15-----

Loading...

  1. 1
 

Basic Information

Type Timing Pulleys Belt Type 5GT Timing Pulleys/Idlers Pulleys

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.