(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Cam Followers - Threaded for grease fittings, flat.
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
- Lead Time Reduction
The outer diameter of the cam follower is flat. The thread for the grease fitting can be M6 or BSPT 1/8. The material is 52100 bearing steel. The outer diameter is crowned and can be configured in sizes from 16 to 52mm. The nut to secure it is carbon steel. The grease fitting can be included, configured by alterations.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ A ]Accessories |
| CFFRT | 52100 Bearing Steel | 1 Hex Nut (1045 Carbon Steel Carbon Steel, Black Oxide) |
Specifications
| Part Number | - | D |
| CFURT12 | - | 30 |
| * | D | Tolerance |
| 16 | 0 - 0.008 |
|
| 19~30 | 0 - 0.009 |
|
| 32~40 | 0 - 0.011 |
|
| 52 | 0 - 0.013 |
| Part Number | D | MxPitch | ℓ | B | B1 | L | M1 (for Grease Fitting) |
d1 | ℓ1 | r | f (Min.) |
||
| Type | dh7 Tolerance | ||||||||||||
| CFFRT | 6 | 0 -0.012 |
16 | 6x1.0 | 9 | 11 | 12 | 28 | M6x0.75 | - | - | 0.5 | 11 |
| 8 | 0 -0.015 |
19 | 8x1.25 | 11 | 32 | 13 | |||||||
| 10 | 22 | 10x1.25 | 13 | 12 | 13 | 36 | 1.0 | 15 | |||||
| 26 | |||||||||||||
| 12 | 0 -0.018 |
30 | 12x1.5 | 14 | 14 | 15 | 40 | 3 | 6 | 1.5 | 20 | ||
| 32 | |||||||||||||
| 16 | 35 | 16x1.5 | 18 | 18 | 19.5 | 52 | PT1/8 | 8 | 24 | ||||
| 18 | 40 | 18x1.5 | 20 | 20 | 21.5 | 58 | 26 | ||||||
| 20 | 0 -0.021 |
52 | 20x1.5 | 22 | 24 | 25.5 | 66 | 4 | 9 | 36 | |||
Table1: Reference Data of Cam Followers| d-D | Standard | Heavy Load | |||||||||||||
| Basic Dynamic Load Rating C (kN) |
Basic Static Load Rating Cor (kN) |
Max. Allowable Load (kN) |
Track Load Capacity(kN) |
Max. Rotational Speed(rpm) |
Mass (g) |
Basic Dynamic Load Rating C (kN) |
Basic Static Load Rating Cor (kN) |
Max. Allowable Load (kN) |
Track Load Capacity(kN) |
Max. Rotational Speed with Seal (rpm) |
Mass (g) |
||||
| (With Seal) | (No Seal) | ||||||||||||||
| Crowned | Flat | Crowned | Flat | ||||||||||||
| 3-10 | 1.47 | 1.18 | 0.36 | 0.37 | 1.37 | 32900 | 47000 | 4.5 | - | - | - | - | - | - | - |
| 4-12 | 2.06 | 2.05 | 0.78 | 0.47 | 1.76 | 25900 | 37000 | 7.5 | - | - | - | - | - | - | - |
| 5-13 | 3.14 | 2.77 | 1.42 | 0.53 | 2.25 | 20300 | 29000 | 10.5 | - | - | - | - | - | - | - |
| 6-16 | 3.59 | 3.58 | 2.11 | 1.08 | 3.43 | 17500 | 25000 | 18.5 | 6.94 | 8.5 | 2.11 | 1.08 | 3.43 | 7700 | 19 |
| 8-19 | 4.17 | 4.65 | 4.73 | 1.37 | 4.02 | 14000 | 20000 | 28.5 | 8.13 | 11.2 | 4.73 | 1.37 | 4.02 | 6090 | 29 |
| 10-22 | 5.33 | 6.78 | 5.81 | 1.67 | 4.7 | 11900 | 17000 | 45 | 9.42 | 14.3 | 5.81 | 1.67 | 4.7 | 5040 | 46 |
| 10-26 | 2.06 | 5.49 | 60 | 2.06 | 5.49 | 61 | |||||||||
| 12-30 | 7.87 | 9.79 | 9.37 | 2.45 | 7.06 | 9800 | 14000 | 105 | 13.4 | 19.8 | 9.37 | 2.45 | 7.06 | 4060 | 107 |
| 12-32 | 2.74 | 7.45 | 115 | 2.74 | 7.45 | 117 | |||||||||
| 16-35 | 12 | 18.3 | 17.3 | 3.14 | 11.2 | 7000 | 10000 | 205 | 20.6 | 37.6 | 17.3 | 3.14 | 11.2 | 3150 | 207 |
| 18-40 | 14.7 | 25.2 | 26.1 | 3.72 | 14.4 | 5950 | 8500 | 295 | 25.2 | 51.3 | 26.1 | 3.72 | 14.4 | 2660 | 300 |
| 20-47 | 20.7 | 34.8 | 32.1 | 7.15 | 21 | 4900 | 7000 | 450 | 33.2 | 64.8 | 32.1 | 7.15 | 21 | 2380 | 455 |
| 20-52 | 8.23 | 23.2 | 525 | 8.23 | 23.2 | 530 | |||||||||
| 24-62 | 30.6 | 53.2 | 49.5 | 10.5 | 34.2 | 4550 | 6500 | 915 | 46.7 | 92.9 | 49.5 | 10.5 | 34.2 | 2030 | 925 |
| 24-72 | 12.9 | 39.8 | 1150 | 12.9 | 39.8 | 1160 | |||||||||
| 30-80 | 45.4 | 87.6 | 73.7 | 14.9 | 52.6 | 3500 | 5000 | 1880 | 67.6 | 145 | 73.7 | 14.9 | 52.6 | 1610 | 1890 |
| 30-85 | 16.1 | 56 | 1950 | 16.1 | 56 | 1960 | |||||||||
| 30-90 | 17.3 | 59.3 | 2000 | 17.3 | 59.3 | 2010 | |||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| CFFRT6-16 |
| CFFRT8-19 |
| CFFRT10-22 |
| CFFRT10-26 |
| CFFRT12-30 |
| CFFRT12-32 |
| CFFRT16-35 |
| CFFRT18-40 |
| CFFRT20-52 |
Loading...
Basic Information
| Category | Cam Followers | Roller Type | Flat Type | Tightening Method | Standard Type |
|---|---|---|---|---|---|
| Material | 52100 Bearing Steel | Roller Lining | None | Shaft | Provided |
| Unit | Metric Series | Roller Guiding Method | Retainer Type |
Specification/Dimensions
-
O.D. D(Ø)
-
Width B(mm)
-
Thread Size on Cam Follower (M)(mm)
-
Allowable Rotational Speed(rpm)
-
type
- CFFRT
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Cam Followers - Hexagon socket wrench head and shank, crowned.
- Cam Followers - Hexagon socket for head and shank, flat.
- Cam Followers - Urethane coated, hex keyway, crowned.
- Roller Followers - Separated, crowned.
- Track Roller - Double Row, Sealed on Both Sides, LR52 Series
- Eccentric Type Cam Followers - Caged with hex key hole, with seals, series CFEBUU.
- Cam Follower - Hexlube® Universal, Standard Stud, SL Series
- Cam Follower - Hexlube® Universal, Heavy Stud, HL Series
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy