(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the typically shaped head (Flat).
Part Number
Configured Part Number is shown.
SJPDTA6-8
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | Type | ||
P Selectable | P Configurable | P, L, B Configurable | ||||
① | O1 Tool Steel | - | Treated Hardness: 60~63HRC | JPDTA | JPDTC | FPDTC |
② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | GJPDTA | GJPDTC | GFPDTC |
③ | SKS3 Tool Steel or Equiv. | - | - | - | - | BFPDTC |
④ | 304 Stainless Steel | - | - | SJPDTA | - | SFPDTC |
⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC | CJPDTA | - | - |
Part Number | - | P | - | L | - | B |
JPDTA10 JPDTC10 FPDTC12T | - - - | 14 14.25 P14.25 | - | L18 | - | B8.6 |
P | h6 |
5.50~6.00 | 0 -0.008 |
6.01~10.00 | 0 -0.009 |
10.01~18.00 | 0 -0.011 |
18.01~30.00 | 0 -0.013 |
Part Number | P | L | B | M (Coarse) | ℓ | C | ||
Type | D | D Tolerance g6 | ||||||
JPDTA GJPDTA SJPDTA CJPDTA | 6 | -0.004 -0.012 | 8, 10 | 10 | 5 | M3 | 5 | 1.0 |
8 | -0.005 -0.014 | 12 | 12 | 6 | M5 | 8 | 1.5 | |
10 | 12, 14 | 16 | 10 | 2 | ||||
12 | -0.006 -0.017 | 16 | 20 | 20 | ||||
13 | 18 | 22 | 22 | M8 | 12 | 3 | ||
16 | 25 | 24 | 25 | |||||
20 | -0.007 -0.020 | 30 | 32 | 30 |
Part Number | P 0.01mm Increment | L | B | M (Coarse) | ℓ | C | ||
Type | D | D Tolerance g6 | ||||||
JPDTC GJPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 8 | 4 | M2 | 3 | 1.0 |
6 | 6.50~10.00 | 10 | 5 | M3 | 5 | |||
6T | M2.6 | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 12 | 6 | M5 | 8 | 1.5 | |
8T | M4 | 6 | ||||||
10 | 11.00~15.00 | 16 | 10 | M5 | 8 | 2 | ||
12 | -0.006 -0.017 | 13.00~16.00 | 20 | 20 | ||||
13 | 14.00~18.00 | 22 | 22 | M8 | 12 | 3 | ||
16 | 17.00~25.00 | 24 | 25 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 32 | 30 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | M (Coarse) | ℓ | C | ||
Type | D | D Tolerance g6 | ||||||
FPDTC GFPDTC BFPDTC SFPDTC | 5 | -0.004 -0.012 | 5.50~8.00 | 5~10 | 2.0~10.0 | M2 | 3 | 1.0 |
6 | 6.50~10.00 | 6~12 | 2.0~12.0 | M3 | 5 | |||
6T | M2.6 | 4 | ||||||
8 | -0.005 -0.014 | 9.00~13.00 | 8~16 | 2.0~15.0 | M5 | 8 | 1.5 | |
8T | 6~16 | M4 | 6 | |||||
10 | 11.00~15.00 | 10~20 | 3.0~20.0 | M5 | 8 | 2 | ||
10T | 6~16 | M4 | 6 | |||||
12 | -0.006 -0.017 | 13.00~16.00 | 12~24 | 3.0~30.0 | M5 | 8 | ||
12T | 8~18 | M4 | 6 | |||||
13 | 14.00~18.00 | 13~26 | 5.0~30.0 | M8 | 12 | 3 | ||
13T | 8~20 | M6 | 9 | |||||
16 | 17.00~25.00 | 16~32 | 5.0~35.0 | M8 | 12 | |||
16T | 10~24 | M6 | 9 | |||||
20 | -0.007 -0.020 | 22.00~30.00 | 20~40 | 5.0~40.0 | M8 | 12 | ||
20T | 12~30 | M6 | 9 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
SJPDTA6-8 |
Loading...
Please check the type/dimensions/specifications of the part SJPDTA6-8 in the Large Head Locating Pins - Round head, flat tip and internally threaded shank. series.
Part Number |
---|
CJPDTA10-14 |
CJPDTA6-10 |
CJPDTA6-8 |
CJPDTA8-12 |
JPDTA10-12 |
SJPDTA8-12 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy