(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Has the typically shaped head (Tapered) and can be characterized by low cost-availability and a wealth of variations.
Part Number
Configured Part Number is shown.
JPDB4-6
Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | P Selectable | P Configurable | P, L, B Configurable | |||
Type | D Tolerance and Shape | Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
① | O1 Tool Steel | - | Treated Hardness: 60~63HRC | JP | BB (m6) BPB (p6) DB (m6) DPB (p6) | JP | BA (m6) BPA (p6) BD (m6) BPD (p6) | FP | BA (m6) BPA (p6) BG (g6) BD (m6) BPD (p6) DG (g6) |
② | O1 Tool Steel | Hard Chrome Plating | Hardness: 50~55HRC Plating Hardness: 750HV~ | GJP | GJP | GFP | |||
③ | SKS3 Tool Steel or Equiv. | - | - | BJP | BJP | BFP | |||
④ | 304 Stainless Steel | - | - | SJP | SJP | SFP | |||
⑤ | 304 Stainless Steel | Hard Chrome Plating | Plating Hardness: 750HV~ | HJP | HJP | HFP | |||
⑥ | 440C or 420 Stainless Steel | - | Treated Hardness: 50~55HRC | CJP | CJP | CFP |
Part Number | - | P | - | L | - | B | ||||
Type | D Tol. Shape | D | ||||||||
JP | BB | 6 | - | 10 | ||||||
JP | BD | 8 | - | 11.98 | ||||||
FP | BA | 10 | - | P12.02 | - | L10 | - | B3.2 | ||
FP | BD | 12 | - | P13.97 | - | L12 | - | B5 |
Part Number | P | L | B | C | m | ℓ | (W) | |||||||||||||||||
Type | D Tolerance and Shape | D | D Tolerance | |||||||||||||||||||||
m6 | p6 | |||||||||||||||||||||||
JP GJP BJP SJP HJP CJP | <Round> BB (m6) BPB (p6) <Diamond> DB (m6) DPB (p6) [ ! ]Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0.5 | 0 | - | |||||||||||||
2 | 3 | 4 | 4 | 0.5 | 1 | 1.2 | ||||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 2 | 1 | 1.5 | ||||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 6 | 1 | 3 | 1.8 | ||||||||||||||||
5 | 6 | 8 | 10 | 2.2 | ||||||||||||||||||||
6 | 8 | 10 | 8 | 3 | ||||||||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 10 | 12 | 13 | 15 | 1.5 | 4 | 3.5 | |||||||||||||||
10 | 12 | 13 | 15 | 10 | 2 | 4 | ||||||||||||||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13 | 15 | 16 | 5 | ||||||||||||||||||
13 | 15 | 16 | 22 | 2 | 5.5 | |||||||||||||||||||
16 | 20 | 25 | 3 | 5 | 7 | |||||||||||||||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 25 | 30 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L | B | C | m | ℓ | (W) | ||||
Type | D Tolerance and Shape | D | D Tolerance | ||||||||
m6 | p6 | ||||||||||
JP GJP BJP SJP HJP CJP | <Round> BA (m6) BPA (p6) <Diamond> BD (m6) BPD (p6) [ ! ]Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.20~2.50 | 3 | 3 | 0.1 | 0.5 | 0 | - |
2 | 2.50~4.00 | 4 | 0.5 | 1 | 1.2 | ||||||
3 | 3.50~6.00 | 5 | 5 | 2 | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~7.00 | 6 | 1 | 3 | 1.8 | ||||
5 | 5.50~8.00 | 10 | 2.2 | ||||||||
6 | 6.50~10.00 | 8 | 3 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9.00~13.00 | 15 | 1.5 | 4 | 3.5 | ||||
10 | 11.00~15.00 | 10 | 2 | 4 | |||||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~16.00 | 5 | |||||||
13 | 14.00~18.00 | 22 | 2 | 5.5 | |||||||
16 | 17.00~25.00 | 3 | 5 | 7 | |||||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 30 | 15 | 9 |
Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | m | ℓ | (W) | |||||
Type | D Tolerance and Shape | D | D Tolerance | |||||||||
m6 | p6 | g6 | ||||||||||
FP GFP BFP SFP HFP CFP | <Round> BA (m6) BPA (p6) BG (g6) <Diamond> BD (m6) BPD (p6) DG (g6) | 1 | +0.008 +0.002 | +0.012 +0.006 | -0.002 -0.008 | 1.20 (1.50)~3.00(2.50) | 2, 3 | 1.0~5.0 | 0.1 | 0.5 | 0 | 0.6 |
2 | 2.50~4.00 | 2~6 | 1.0~15.0(10.0) | 0.5 | 1 | 1.2 | ||||||
3 | 3.50~8.00 | 3~10 | 1.0~15.0(10.0) | 2 | 1 | 1.5 | ||||||
4 | +0.012 +0.004 | +0.020 +0.012 | -0.004 -0.012 | 4.50~8.00 | 3(4)~14 | 1.0~15.0(10.0) | 1 | 3 | 1.8 | |||
5 | 5.50~10.00 | 5~15 | 1.0~15.0(10.0) | 2.2 | ||||||||
6 | 6.50~10.00 | 5~15 | 1.0~30.0(25.0) | 3 | ||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | -0.005 -0.014 | 8.50~15.00 | 5(6)~16 | 1.0~30.0(25.0) | 1.5 | 4 | 3.5 | |||
10 | 11.00~17.00 | 5(10)~20 | 3.0~30.0(25.0) | 2 | 4 | |||||||
12 | +0.018 +0.007 | +0.029 +0.018 | -0.006 -0.017 | 13.00~18.00 | 6(10)~24 | 3.0~30.0(25.0) | 5 | |||||
13 | 14.00~20.00 | 7(12)~26 | 5.0~30.0(25.0) | 2 | 5.5 | |||||||
16 | 17.00~27.00 | 8(15)~32 | 5.0~30.0 | 3 | 5 | 7 | ||||||
20 | +0.021 +0.008 | +0.035 +0.022 | -0.007 -0.020 | 22.00~30.00 | 10(15)~40 | 5.0~30.0 | 9 |
D | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||
①O1 Tool Steel Hardened JPBB JPBPB | ②O1 Tool Steel (Hardened) GJPBB GJPBPB | ③O1 Tool Steel BJPBB BJPBPB | ④304 Stainless Steel SJPBB SJPBPB | ⑤Hard 304 Stainless Steel HJPBB HJPBPB | ⑥440C or 420 Stainless Steel CJPBB CJPBPB | ①O1 Tool Steel Hardened JPDB JPDPB | ②O1 Tool Steel (Hardened) GJPDB GJPDPB | ③O1 Tool Steel BJPDB BJPDPB | ④304 Stainless Steel SJPDB SJPDPB | ⑤Hard 304 Stainless Steel HJPDB HJPDPB | ⑥440C or 420 Stainless Steel CJPDB CJPDPB | |
1 | 740 | 990 | 660 | 1,110 | 1,370 | 1,220 | - | - | - | - | - | - |
2 | 320 | 360 | 240 | 430 | 600 | 480 | 370 | 490 | 330 | 550 | 770 | 620 |
3 | 330 | 370 | 250 | 460 | 640 | 500 | 400 | 540 | 360 | 590 | 800 | 660 |
4 | 360 | 410 | 270 | 500 | 700 | 550 | 440 | 590 | 390 | 650 | 870 | 710 |
5 | 390 | 450 | 300 | 540 | 760 | 600 | 470 | 630 | 420 | 700 | 910 | 780 |
6 | 420 | 480 | 320 | 570 | 770 | 630 | 490 | 660 | 440 | 740 | 960 | 820 |
8 | 440 | 510 | 340 | 600 | 810 | 660 | 520 | 700 | 460 | 780 | 1,020 | 860 |
10 | 460 | 520 | 350 | 630 | 850 | 680 | 540 | 720 | 480 | 820 | 1,060 | 890 |
12 | 480 | 550 | 360 | 660 | 880 | 690 | 570 | 760 | 510 | 860 | 1,110 | 900 |
13 | 500 | 580 | 380 | 680 | 890 | 750 | 590 | 790 | 530 | 890 | 1,160 | 980 |
16 | 570 | 760 | 510 | 910 | 1,190 | 1,010 | 790 | 1,060 | 710 | 1,190 | 1,450 | 1,310 |
20 | 730 | 980 | 650 | 1,160 | 1,420 | 1,270 | 1,000 | 1,350 | 900 | 1,510 | 1,810 | 1,650 |
D | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||
①O1 Tool Steel Hardened JPBA JPBPA | ②O1 Tool Steel (Hardened) GJPBA GJPBPA | ③O1 Tool Steel BJPBA BJPBPA | ④304 Stainless Steel SJPBA SJPBPA | ⑤Hard 304 Stainless Steel HJPBA HJPBPA | ⑥440C or 420 Stainless Steel CJPBA CJPBPA | ①O1 Tool Steel Hardened JPBD JPBPD | ②O1 Tool Steel (Hardened) GJPBD GJPBPD | ③O1 Tool Steel BJPBD BJPBPD | ④304 Stainless Steel SJPBD SJPBPD | ⑤Hard 304 Stainless Steel HJPBD HJPBPD | ⑥440C or 420 Stainless Steel CJPBD CJPBPD | |
1 | 1,250 | 1,570 | 1,050 | 1,850 | 2,260 | 2,000 | - | - | - | - | - | - |
2 | 480 | 600 | 400 | 720 | 940 | 780 | 620 | 800 | 530 | 920 | - | 1,020 |
3 | 520 | 650 | 430 | 760 | 1,010 | 840 | 670 | 870 | 580 | 990 | - | 1,080 |
4 | 570 | 710 | 470 | 840 | 1,050 | 910 | 720 | 940 | 630 | 1,070 | - | 1,180 |
5 | 610 | 770 | 500 | 900 | 1,130 | 990 | 780 | 1,010 | 670 | 1,170 | - | 1,290 |
6 | 640 | 810 | 540 | 940 | 1,180 | 1,040 | 830 | 1,070 | 720 | 1,230 | - | 1,350 |
8 | 680 | 850 | 570 | 1,000 | 1,240 | 1,080 | 870 | 1,130 | 750 | 1,300 | - | 1,420 |
10 | 710 | 890 | 590 | 1,050 | 1,290 | 1,140 | 900 | 1,170 | 780 | 1,360 | - | 1,490 |
12 | 740 | 930 | 620 | 1,090 | 1,340 | 1,250 | 940 | 1,230 | 810 | 1,420 | - | 1,500 |
13 | 770 | 970 | 640 | 1,150 | 1,400 | 1,270 | 990 | 1,280 | 850 | 1,490 | - | 1,630 |
16 | 1,030 | 1,290 | 860 | 1,520 | 1,850 | 1,660 | 1,310 | 1,710 | 1,140 | 1,980 | - | 2,170 |
20 | 1,310 | 1,640 | 1,090 | 1,940 | 2,360 | 2,100 | 1,660 | 2,160 | 1,440 | 2,510 | - | 2,740 |
D | Unit Price Round Shape | Unit Price Diamond Shape | ||||||||||
①O1 Tool Steel Hardened FPBA FPBPA FPBG | ②O1 Tool Steel (Hardened) GFPBA GFPBPA GFPBG | ③O1 Tool Steel BFPBA BFPBPA BFPBG | ④304 Stainless Steel SFPBA SFPBPA SFPBG | ⑤Hard 304 Stainless Steel HFPBA HFPBPA HFPBG | ⑥440C or 420 Stainless Steel CFPBA CFPBPA CFPBG | ①O1 Tool Steel Hardened FPBD FPBPD FPDG | ②O1 Tool Steel (Hardened) GFPBD GFPBPD GFPDG | ③O1 Tool Steel BFPBD BFPBPD BFPDG | ④304 Stainless Steel SFPBD SFPBPD SFPDG | ⑤Hard 304 Stainless Steel HFPBD HFPBPD HFPDG | ⑥440C or 420 Stainless Steel CFPBD CFPBPD CFPDG | |
1 | 1,740 | 2,230 | 1,490 | 2,600 | 3,130 | 2,850 | 920 | 1,220 | 820 | 1,500 | 2,410 | 1,560 |
2 | 670 | 860 | 570 | 1,010 | 1,260 | 1,110 | 860 | 1,110 | 740 | 1,290 | 1,570 | 1,450 |
3 | 710 | 910 | 600 | 1,070 | 1,320 | 1,190 | 940 | 1,200 | 800 | 1,380 | 1,660 | 1,540 |
4 | 780 | 1,000 | 670 | 1,180 | 1,430 | 1,290 | 1,030 | 1,330 | 880 | 1,520 | 1,820 | 1,670 |
5 | 860 | 1,110 | 740 | 1,270 | 1,540 | 1,410 | 1,090 | 1,400 | 940 | 1,640 | 1,980 | 1,820 |
6 | 890 | 1,140 | 760 | 1,340 | 1,620 | 1,470 | 1,160 | 1,490 | 990 | 1,740 | 2,090 | 1,920 |
8 | 940 | 1,200 | 800 | 1,410 | 1,700 | 1,540 | 1,230 | 1,580 | 1,050 | 1,820 | 2,190 | 2,000 |
10 | 980 | 1,260 | 840 | 1,470 | 1,770 | 1,620 | 1,270 | 1,630 | 1,090 | 1,920 | 2,300 | 2,090 |
12 | 1,030 | 1,330 | 880 | 1,540 | 1,840 | 1,620 | 1,340 | 1,710 | 1,140 | 2,000 | 2,400 | 2,120 |
13 | 1,070 | 1,370 | 920 | 1,610 | 1,930 | 1,760 | 1,380 | 1,770 | 1,180 | 2,090 | 2,510 | 2,130 |
16 | 1,430 | 1,840 | 1,220 | 2,140 | 2,570 | 2,360 | 1,850 | 2,370 | 1,580 | 2,780 | 3,340 | 3,080 |
20 | 1,800 | 2,310 | 1,540 | 2,720 | 3,260 | 2,980 | 2,340 | 3,000 | 2,000 | 3,530 | 4,240 | 3,870 |
Quantity | 1~4 | 5~19 | 20~49 | 50~99 | 100~199 | 200 or more |
Discount Rate | Unit Price | 5% | 10% | 15% | 18% | To Be Quoted |
Days to Ship | Standard | 7 additional days |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
JPDB4-6 |
Loading...
Product Name | Feature | Catalog |
---|---|---|
Small Diameter Locating Pins | Locating Pins with Ø4 or less diameter suitable for small works. | Click here |
Locating Pins for Height Adjusting | Locating Pins with short head for thin PC boards. | Click here |
Nonmagnetic Locating Pins | Nonmagnetic Aluminum locating pins suitable for environments where magnetism must be avoided. | Click here |
Plastic Locating Pins | Plastic Locating Pins prevent work damages. | Click here |
Height Adjusting Pins | Locating Pins suitable for locating in vertical direction. | Click here |
Support Pins | Pins for use in higher position to avoid interferences. | Click here |
The combination of round and diamond shape allows the workpiece to be accurately positioned in the A direction.
Also, any errors in the pitch of the mounting holes are absorbed in the B direction.
Basic Shape | Large Head | Head Tip Shape | Tapered | Drive | No |
---|---|---|---|---|---|
Shank Style | Straight(Press Fit) | Tolerance of Positioning Side Outer Diameter | 0/-0.01 |
Please check the type/dimensions/specifications of the part JPDB4-6 in the Large Head Locating Pins - Round or diamond shaped head, tapered tip and straight shank. series.
Part Number |
---|
CJPBB10-15 |
CJPBB12-13 |
CJPBB12-15 |
JPDB5-6 |
JPDB5-8 |
JPDB6-10 |
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy