(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Conveyor Rollers - Motor Rollers (MOR38-400-10)

Conveyor Rollers - Motor Rollers

Click this image to zoom it.

Move the mouse over the image to zoom

  • Spec Change
  • Price Reduction
  • Lead Time Reduction

Conveyor Roller with a built-in motor and a reducer. This does not require the separate space to be held for the motor and thus, helps space saving.

  • inCAD Components
Powered Rollers (with built-In Motor):Related Image

Specifications

Part Number-L-Nominal Velocity
MOR38-300-10
Part NumberLNominal Speed
TypeD
MOR38300
400
500
10
15
20
42.7
57
[ ! ]For orders larger than indicated quantity, please request a quotation.
DNominal VelocityPower SupplyRated Current (A)
(50Hz/60Hz)
dGWFSpeed (m/min)Tangential Force (N)Torque (N·cm)Roller Strength (N)
50Hz60Hz50Hz60Hz50Hz60HzL300L400L500
RatingStartingRatingStartingRatingStartingRatingStarting
3810Three-Phase
200V
50/60Hz
Input
16/12W
0.055/0.050121881610.413.116.737.312.431.331.870.923.659.6343294294
1514.216.112.339.69.230.923.375.317.558.7
2022.225.27.825.35.819.714.948.011.137.4
42.710Three-Phase
200V
50/60Hz
Input
15/14W
0.056/0.05112.113.514.230.714.223.430.365.530.350.1490441392
1517.919.99.620.89.615.920.544.420.533.9
2024.427.27.015.27.011.615.032.515.024.8
5710Three-Phase
200V
50/60Hz
Input
33/27W
0.120/0.100152311.213.344.583.137.078.4126.8236.8105.4223.4980980784
1512.414.840.275.133.567.6114.5214.095.4192.6
2017.020.229.455.024.549.583.7156.769.8141.0
[ ! ]Voltage fluctuation is allowed up to ±3% for 50Hz. (Up to ±5% allowed for 60Hz)
[ ! ]In case 50Hz is applied at ±5% of voltage variation, torque value diminishes by 40% from the values shown in the table above.
[ ! ]Indicated speed applies for rated power. Also rotational velocity and torque change when load is light or excessive.
[ ! ]Roller strengths may vary depending on applied shock loads, load weights, materials. Be sure to provide ample margin. (Recommendations: 1/2 ~ 1/3 of the chart values)
kgf=Nx0.101972

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
MOR38-400-10
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSOuter Diameter D
(Ø)
L
(mm)
Nominal Speed
1 Piece(s)

6 Days or more

103840010

Loading...

  1. 1

Example

Powered Rollers (with built-In Motor):Related Image
 

Basic Information

Type Long Roller Long Roller Type Motor Rollers Type of Lining No
Drive Standard Power Supply Three-Phase 200 V Operating Temperature Range(℃) 0::40
I.D. d(mm) 12

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.