(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Open End Belt - Variety of types.
Click this image to zoom it.
Move the mouse over the image to zoom
•Belt Series : AT10, AT5, H, L, P3M, P5M, P8M, S3M, S5M, S8M, T10, T5, XL
•Belt Material : Polyurethane Belt, Rubber Belt
•Belt Shape Type : Circular Tooth Profile PX Belt, Round Tooth Profile Super Torque, Trapezoidal Tooth Profile Circular Type, Trapezoidal Tooth Profile Metric Type
For complete product overview and details on Open End Belt - Polyurethane, Chloroprene Rubber (MISUMI) see the sections below:
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Operating Temp: -20°C~80°C
[ ! ]Operating Temp: -20°C~80°C
| Type | [ M ]Material | |
| Main Body | Core Wire | |
| TBOG, HTBOG, PTBOG | Chloroprene Rubber (Black) | Glass Cord |
| TBO, HTBO, TTBO | Polyurethane (White) | Steel Cord |
Specifications
| Part Number | - | Number of Teeth | ||||
| Type | Belt Type | Belt Nominal Width | ||||
| TBO HTBOG TTBO | - H - S5M - AT5 | 100 100 150 | - - - | 1100 500 1200 | ||
| Belt Type | Pitch | 2θ (°) | H | h | i | L | Unit Mass g/m (Width: 10mm) | |
| Chloroprene Rubber | Polyurethane | |||||||
| XL | 5.08 | 50° | 2.25 | 1.25 | 1.0 | 1.35 | 26.77 | 22.17 |
| L | 9.525 | 40° | 3.5 | 1.9 | 1.6 | 3.2 | 37.8 | 36.22 |
| H | 12.7 | 40° | 4.3 | 2.3 | 2.0 | 4.4 | 52.36 | 41.22 |
| T5 | 5 | 40° | 2.2 | 1.2 | 1.0 | 1.8 | - | 22.1 |
| T10 | 10 | 40° | 4.5 | 2.5 | 2.0 | 3.5 | - | 47.6 |
| AT5 | 5 | 50° | 2.7 | 1.2 | 1.5 | 2.5 | - | 32.0 |
| AT10 | 10 | 50° | 4.5 | 2.5 | 2.0 | 5 | - | 58.6 |
| Belt Type | Pitch | Ra | Lr | H | h | i | PLD | Unit Mass g/m (Width: 10mm) | |
| Chloroprene Rubber | Polyurethane | ||||||||
| S3M | 3 | 1.95 | 1.95 | 2.10(2.00) | 1.14 | 0.96(0.86) | 0.381 | - | 24.3 |
| S5M | 5 | 3.25 | 3.25 | 3.61(3.20) | 1.91(1.77) | 1.70(1.43) | 0.480 | 38.8 | 34.6 |
| S8M | 8 | 5.20 | 5.20 | 5.30(5.00) | 3.05(2.85) | 2.25(2.15) | 0.686 | 55.2 | 57.6 |
| Belt Type | Pitch | ℓ | H | h | PLD | r | Unit Mass g/m (Width: 10mm) |
| Chloroprene Rubber | |||||||
| P5M | 5 | 3.25 | 3.6 | 1.81 | 0.571 | 0.5 | 41.0 |
| P8M | 8 | 5.2 | 5.5 | 2.9 | 0.686 | 0.8 | 56.0 |
| Part Number | Number of Teeth | Belt Width (mm) | Allowable Tension (N) | Applicable Metal Joint | |||
| Type | Belt Type | Belt Nominal Width | Chloroprene Rubber | Polyurethane | |||
| TBOG (Chloroprene Rubber) TBO (Polyurethane) | XL | 025 | 30~3937 | 6.4 | - | 66 | TBCK-XL025 |
| 037 | 9.5 | 47 | 102 | TBCK-XL037 | |||
| 050 | 12.7 | 70 | 142 | TBCK-XL050 | |||
| L | 050 | 30~2099 | 12.7 | 95 | 259 | TBCK-L050 | |
| 075 | 19.1 | 165 | 387 | TBCK-L075 | |||
| 100 | 25.4 | - | 519 | TBCK-L100 | |||
| H | 075 | 45~1574 | 19.1 | - | 397 | TBCK-H075 | |
| 100 | 25.4 | 529 | TBCK-H100 | ||||
| 150 | 38.1 | - | 799 | TBCK-H150 | |||
| 200 | 50.8 | - | 1093 | TBCK-H200 | |||
| HTBOG (Chloroprene Rubber) HTBO (Polyurethane) | S3M | 060 | 40~6666 | 6 | - | 127 | TBCK-S3M060 |
| 100 | 10 | - | 106 | TBCS-S3M100 | |||
| 150 | 15 | - | 159 | TBCS-S3M150 | |||
| S5M | 100 | 50~4000 | 10 | 310 | 215 | TBCK-S5M100 | |
| 150 | 15 | 490 | 323 | TBCK-S5M150 | |||
| 250 | 25 | - | 539 | TBCK-S5M250 | |||
| S8M | 150 | 60~2500 | 15 | - | 647 | TBCK-S8M150 | |
| 250 | 25 | 950 | 1176 | TBCK-S8M250 | |||
| 300 | 30 | - | 1412 | TBCK-S8M300 | |||
| 400 | 40 | - | 1882 | TBCK-S8M400 | |||
| PTBOG (Chloroprene Rubber) | P5M | 100 | 50~4000 | 10 | 287 | - | TBCK-S5M100 |
| 150 | 15 | 456 | - | TBCK-S5M150 | |||
| 250 | 25 | 817 | - | TBCK-S5M250 | |||
| P8M | 150 | 60~2500 | 15 | 606 | - | TBCK-S8M150 | |
| 250 | 25 | 1060 | - | TBCK-S8M250 | |||
| TTBO (Polyurethane) | T5 | 100 | 40~4000 | 10 | - | 112 | TBCK-T5100 |
| 150 | 15 | - | 166 | TBCK-T5150 | |||
| 200 | 20 | - | 225 | TBCK-T5200 | |||
| 250 | 25 | - | 284 | TBCK-T5250 | |||
| T10 | 150 | 40~2000 | 15 | - | 299 | TBCK-T10150 | |
| 200 | 20 | - | 397 | TBCK-T10200 | |||
| 250 | 25 | - | 529 | TBCK-T10250 | |||
| 300 | 30 | - | 627 | TBCK-T10300 | |||
| 400 | 40 | - | 862 | TBCK-T10400 | |||
| 500 | 50 | - | 1064 | TBCK-T10500 | |||
| AT5 | 100 | 40~4000 | 10 | - | 147 | TBCK-AT5100 | |
| 150 | 15 | - | 221 | TBCK-AT5150 | |||
| AT10 | 150 | 40~2000 | 15 | - | 469 | TBCK-AT10150 | |
| 200 | 20 | - | 625 | TBCK-AT10200 | |||
| 250 | 25 | - | 781 | TBCK-AT10250 | |||
[ ! ]For orders larger than indicated quantity, please request a quotation.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| TTBO-AT5100-[40-4000/1] |
| TTBO-AT5150-[40-4000/1] |
Loading...
Basic Information
| Belt Type | Open End | Belt Tooth Surface | Standard (Single Sided) | Transmission Torque | Regular Torque Transmission |
|---|
Specification/Dimensions
-
Belt Material
- Rubber Belt
- Polyurethane Belt
-
Core Wire Material
- Glass Fiber
- Steel Cord
- Glass Fiber
-
Belt Width (mm)(mm)
-
Belt Width (Inch)(Inch)
-
Belt Shape Type
- Trapezoidal Tooth Profile Circular Type
- Trapezoidal Tooth Profile Metric Type
- Round Tooth Profile Super Torque
- Circular Tooth Profile PX Belt
-
Number of Teeth
-
type
- HTBO
- HTBOG
- PTBOG
- TBO
- TBOG
- TTBO
-
Belt Type
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 8 Days or Less
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Toothed Belts for High Torque - Type S5M.
- Toothed Belts for High Torque - Type S8M.
- Toothed Belts for High Torque - Type S14M.
- High Torque Timing Belts - Type P8M.
- Timing Belts for Super High Torque - Type UP5M.
- Toothed Belts - Type T10.
- High Torque Timing Belts - Type MR2, GT series.
- High Torque Timing Belts - MR3 type, GT series.
Complementary Products
-
Clamping Plates for Open End Belt - Overpressure prevention, configurable orifice position.
MISUMI Days to Ship : 12 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy