(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Push to Connect Fittings - Clean Room, Reducer
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
One Touch coupling suitable for clean room environment.
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ M ] Material: Polypropylene
[ M ] Material: Polypropylene
Specifications
| Part Number | - | Nominal |
| PPSCN4 PPSCY6 | - - | 1 1 |
| Part Number | B | L | P | Mass (g) | Effective Sectional Area (mm2) | ||
| Type | D1 | D2 | |||||
| PPCGY | 6 | 4 | 37.8 | 15.3 | 10 | 3.5 | 5.3 |
| 8 | 4 | 40.3 | 16.8 | 12.5 | 4 | 5.3 | |
| 6 | 40.9 | 17.4 | 4.5 | 9 | |||
| 10 | 6 | 43.9 | 18.9 | 12.5 | 5.5 | 9 | |
| 8 | 43.7 | 18.7 | 14.5 | 6.5 | 20 | ||
| 12 | 8 | 49.7 | 20.7 | 14.5 | 8.5 | 20 | |
| 10 | 50.2 | 21.2 | 17.5 | 10 | 35 | ||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PPCGY6-4 |
| PPCGY8-4 |
| PPCGY8-6 |
| PPCGY10-6 |
| PPCGY10-8 |
| PPCGY12-8 |
| PPCGY12-10 |
Loading...
More Information
Specifications
| Applicable Fluid | Air, Water, Chemicals |
| Operating Temperature Range | 0~80°C |
| Max. Operating Pressure | 0.9MPa (20°C) |
| Operating Vacuum Level | -100kPa |
· Clean environment compatible polypropylene (PP) is used for the main body.
· Plastic body is semitransparent so that fluid is recognizable from the outside.
■Precautions for Use
· For water, Inserts for Soft Tubes (>> Click here. PUIT, PUSIT) must be used, and keep the surge pressure to below max. pressure rating.
· If threaded portion is made of PP, tighten coupling by screwing hand tight, then giving 2 or 3 turns with a wrench. Over tightening may damage threads. Insufficient tightening may cause loosening or leaking.
· Due to creep deformation, screws may become loose and minute leakages may occur. Periodical tightening maintenance is recommended. If retightening does not work, then replace the coupling in use.
· When possibilities of machine and equipment damages exist due to fluid medium leakages, consider providing protective measures such as covers prior to use.
· No oil permitted.
Basic Information
| Type | One-Touch Couplings | Thread Portion Material | No Thread Part | Application | Clean circumstance |
|---|---|---|---|---|---|
| Applicable Fluid | Water / Air / Chemicals, Solvent | Fitting Type | Socket and reducer | Sockets, Reducers | Reducer |
| Operating Temperature Range | 0::80°C |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Push to Connect Fittings - Stainless Steel, Miniature Connector
- New Joint GWP □-0 Series
- for Chemicals, Tube Fitting Chemical Type Elbow
- General Plumbing Tube Fitting 45° Socket Elbow
- Tube Fitting Different Diameter Triple for Standard Pipe
- Union Elbow KAL Antistatic One-Touch Fitting
- Bulkhead Union KGE One-Touch Fitting
- Tube Coupler, KC Series, Union for Bulkhead, KCE
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy