(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Oil Free Seals for Rotary Motion, Double Lip (MUDN25)
- Volume Discount
- Lead Time Reduction
•Shaft Operation: Rotation
•Adhesive Material: Nitrile Rubber
•Operating Circumferential Velocity (m/s): 10
•Operating Pressure Range (mpa): ::0.03
•Attaching Method: Only from shaft end
Part Number
Configured Part Number is shown.
MUDN25
・Materials
| Type | [ M ]Material | Applications | ||
| ①Oil Seal; Rubber Hardness | ②Metal Ring | ③Spring | ||
| MUDN | Nitrile Rubber (NBR Nitrile Rubber ); Hs70 | Low Carbon Steel | SW-B | Rotary Motion |
| MUEN | Nitrile Rubber (NBR Nitrile Rubber ); Hs70 | Low Carbon Steel | SW-B | Rotary Motion |
Specifications
| Part Number |
| MUEN10 |
■Conditions of Use
| Operating Temperature Range | -25~120°C |
| Operating Pressure | 0.03MPa or Less |
| Wind Velocity | 10m/sec. or Less |
| Shaft Tolerance | h8 (or g6) |
| Shaft Coarseness | 3S or Less |
| Sealed Substance | Oil, Grease |
| Part Number | D | C | (E) | (F) | |||
| Type | d | ||||||
| MUDN | 10 | 20 | +0.09 +0.04 | 7 | ±0.3 | 30° | 1 |
| 12 | 25 | 7 | 20° | 1.5 | |||
| 15 | 25 | 7 | 30° | 1 | |||
| 20 | 32 | +0.11 +0.05 | 8 | 30° | 1 | ||
| 25 | 38 | 8 | 20° | 1 | |||
| 30 | 42 | 8 | 30° | 1 | |||
| 35 | 50 | 8 | 30° | 1 | |||
| 40 | 62 | +0.14 +0.06 | 12 | ±0.4 | 30° | 1 | |
| 45 | 62 | 9 | ±0.3 | 30° | 1 | ||
| 50 | 65 | 9 | 20° | 1 | |||
| Part Number | D | C | (E) | (F) | |||
| Type | d | ||||||
| MUEN | 10 | 20 | +0.30 +0.10 | 7 | ±0.3 | 30° | 1.0 |
| 12 | 25 | 7 | 20° | ||||
| 15 | 25 | 7 | 30° | ||||
| 17 | 30 | 7 | 30° | ||||
| 20 | 32 | +0.35 +0.10 | 8 | 30° | |||
| 25 | 38 | 8 | 20° | ||||
| 30 | 42 | 8 | 30° | ||||
| 35 | 50 | 8 | 30° | ||||
| 40 | 62 | 8 | 30° | ||||
| 45 | 62 | 9 | 30° | ||||
| 50 | 65 | 9 | 20° | ||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Basic Information
| Sliding Surface | Axis | Housing Groove | No | Sealed Substance | Oil / Grease |
|---|---|---|---|---|---|
| Operating Temperature Range(℃) | -25::120 | Oil Seals material | Nitrile Rubber (NBR) | Attaching Method | From only the shaft end |
| Two Liquids Separation | No | Environment, Applications | Standard | Dust Lip | Presence |
| Operating Pressure(MPa) | ::0.03 |
Please check the type/dimensions/specifications of the part MUDN25 in the Oil Free Seals for Rotary Motion, Double Lip series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| MUDN12 |
| MUDN15 |
| MUDN20 |
| MUDN30 |
| MUDN35 |
| MUDN40 |
Additional Products in this Category
- Oil Free Seals for Rotary Motion, Single Lip
- Oil Seal - AC Type
- Oil Seal - KE Series
- Oil Seal - UD Type
- Oil Seal - UE Type
- Oil Seal - TC Series
- Oil Seal - TB4 Type
- Oil Seal - SA1J Series
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy