(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Categories

Applications

Brands

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products
Order/Quote

Part Number Checker

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Manifold Blocks - Hydraulic or Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes (Part Numbers)

Manifold Blocks - Hydraulic or Pneumatic, Outlets 2 Sides, 2 Inlets, Configurable Mounting Holes
  • Lead Time Reduction

MISUMI

MISUMI

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

  • inCAD Components

PDFP.2019-3297

Part Number

Configured Part Number is shown.

Manifold Blocks - Hydralulic, Outlets 2 Sides, 2 Inlets, Horizontal Mounting:Related Image
・Materials
UsageType[ M ]
Material		[ S ]Surface TreatmentMax. Operating Pressure
Pitch (P) StandardPitch (P) Configurable
30x35 Square40 Square60 Square70 Square30x40 Square50 Square70 Square30x35 Square40 Square60 Square
Hydraulic BMISBMIF-BMIL---BMISPBMIFP-1018 Carbon SteelTrivalent Chromate20.6MPa≈210kgf/cm² or less
-BMIFRBMIFLR-----BMIFRPBMIFLRP304 Stainless Steel-
-BMIFS--------316 Stainless Steel
Pneumatic----BMIAFBMIALBMIAB---5052 Aluminum Alloy-1MPa≈10kgf/cm² or less
----BMIAFA-----Clear Anodize
[ ! ]Material of 70 Square is 6063 Aluminum Alloy.

Specifications

Part Number-R-S-G-K-P
TypeMounting Hole ChangeCircuits
BMIAF
BMIFRP
G-BMIFRP		ZT
ZT
ZT		3
3
3		-
-
-		R1
R2
R2		-
-
-		S2
S1
S1		-
-
-		G2
G2
G2		-
-
-		K2
K2
K2
-
-
P25
P25

(G Thread)
Part NumberRc (PT), NPT, M (Coarse)Pitch PNumber of Pitches NTotal Number of R, S, G and K ThreadsABEFXYMounting Hole
TypeMounting Hole ChangeCircuitsR, SG, KStandardConfigurable 1mm IncrementM
Hydraulic 30x35 SQ.NA (Through)




T (Tapped)




ZT
(Counterbore Tapped)		11 (1/8)
2 (1/4)		1 (1/8)
2 (1/4)		--0430353017.5176M5
Pitch Standard BMIS
BMISP		23020~5016
328
4310
5412
[ ! ]d1 dimension in ( ) is only applicable to 304 Stainless Steel.625~50514
Hydraulic Type 40 SQ.11 (1/8)
2 (1/4)
3 (3/8)
1N (NPT1/8)
2N (NPT1/4)
3N (NPT3/8)		2 (1/4)
3 (3/8)
4 (1/2)
2N (NPT1/4)
3N (NPT3/8)
4N (NPT1/2)		--0440403520207M6
Pitch Standard
BMIF
BMIFR
BMIFS		Pitch Configurable
BMIFP
BMIFRP
24025~5016
328
4310
5412
630~50514
Hydraulic Type 60 SQ.12 (1/4)
3 (3/8)
4 (1/2)
6 (3/4)		2 (1/4)
3 (3/8)
4 (1/2)
6 (3/4)		--04606030307.58M8
Pitch Standard
BMIFLR		Pitch Configurable
BMIFLRP		26035~6016
328
4310
5412
640~60514
Hydraulic Type 70 SQ.13 (3/8)
4 (1/2)
6 (3/4)		6 (3/4)
8 (1)		--047070403516.58M8
Pitch Standard
BMIL 		26016
328
4310
Pneumatic 30x40 SQ.11 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8)
2N (NPT1/4)		1 (1/8)
2 (1/4)
5 (M5)
1N (NPT1/8) 2N (NPT1/4)		--04304020207.57M5
Pitch Standard
BMIAF
BMIAFA		23016
328
4310
5412
6514
Pneumatic 50 SQ.12 (1/4)
3 (3/8)
4 (1/2)		2 (1/4)
3 (3/8)
4 (1/2)		--04505025258.58.5M8
Pitch Standard
BMIAL		24016
328
4310
5412
6514
Pneumatic 70 SQ.14 (1/2)
6 (3/4)		4 (1/2)
6 (3/4)
8 (1)		--047070403516.58M8
Pitch Standard
BMIAB		26016
328
4310
[ ! ]For G (PF) Thread please place an order specified with G- before part number. (Ex: G-BMIF) For ordering, see the Ordering Example.
[ ! ]For R, S, G and K, specify 1, 2, 3, 4, 6, 8, 1N, 2N, 3N or 4N indicated before ( ).      [ ! ]Single Circuit is not available for Pitch Configurable Type.
[ ! ]Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. [ ! ]Only 6 Circuit Type has an additional mounting hole at the midpoint of the overall length.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>
Part Number
BMIAFANA4-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA4-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA5-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA5-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA5-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA5-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA5-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA5-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA5-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA5-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA5-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA5-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA5-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA5-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA5-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA5-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA5-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA5-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA6-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA6-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA6-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA6-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA6-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA6-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA6-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA6-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA6-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA6-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA6-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA6-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFANA6-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFANA6-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFANA6-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFANA6-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT1-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT1-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT1-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT1-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT1-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT1-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT1-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT1-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT1-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT1-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT1-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT1-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT1-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT1-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT1-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT1-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT2-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT2-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT2-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT2-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT2-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT2-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT2-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT2-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT2-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT2-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT2-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT2-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT2-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT2-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT2-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT2-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT3-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT3-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT3-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT3-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT3-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT3-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT3-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT3-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT3-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT3-R[1,​2,​5]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT3-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT3-R[1,​2,​5]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT3-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT3-R[1,​2,​5]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT3-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT3-R[1,​2,​5]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT4-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT4-[R1N,​R2N]-[S1N,​S2N]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT4-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT4-[R1N,​R2N]-[S1N,​S2N]-G[1,​2,​5]-K[1,​2,​5]
BMIAFAT4-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-[K1N,​K2N]
BMIAFAT4-[R1N,​R2N]-S[1,​2,​5]-[G1N,​G2N]-K[1,​2,​5]
BMIAFAT4-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-[K1N,​K2N]
BMIAFAT4-[R1N,​R2N]-S[1,​2,​5]-G[1,​2,​5]-K[1,​2,​5]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSMaterial Surface Treatment Block Size
(mm) 		Number of circuits
(Ream) 		Thread Size / Type Mounting Hole Change Pitch P
(mm) 		Fixed / Designated Pitch Application Drawing G Part Thread Dia. NPT Selection [G] Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1) Drawing K Part Thread Dia. NPT Selection [K] Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1) Drawing R Part Thread Dia. NPT Selection [R] Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) Drawing S Part Thread Dia. NPT Selection [S] Drawing S Part Thread Dia. PT/PF, M (Coarse) Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×405Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×406Standard Thread {PT, M (Coarse) Thread}NA (Through)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×401Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×402Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 51/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]--1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×403Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 5-1 ～ 5-1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]-1/4 [S2N] / 1/8 [S1N]-
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]-1/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic1/4 [G2N] / 1/8 [G1N]--1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 51/4 [K2N] / 1/8 [K1N]-1/4 [R2N] / 1/8 [R1N]--1 ～ 5
1 Piece(s)

10 Days or more

10A5052Clear Anodize30×404Standard Thread {PT, M (Coarse) Thread}T (Tapped)30Fixed TypePneumatic-1 ～ 5-1 ～ 51/4 [R2N] / 1/8 [R1N]--1 ～ 5

Loading...

  1. << Prev
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
  7. Next >>
 

Basic Information

Flow Lateral Through Holes•Vertical Through Hole Type

Configure

Clear All

3,008 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • 1018 Carbon Steel
    • 304 Stainless Steel
    • 316 Stainless Steel
    • A5052

    Clear

  • Surface Treatment

    • No
    • Trivalent Chromate
    • Clear Anodize

    Clear

  • Block Size(mm)

    • 30×35
    • 30×40
    • 40×40
    • 50×50
    • 60×60
    • 70×70

    Clear

  • Number of circuits(Ream)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

    Clear

  • Thread Size / Type

    • G (PF) Thread
    • Standard Thread {PT, M (Coarse) Thread}

    Clear

  • Mounting Hole Change

    • NA (Through)
    • Not Specified (Counterbore)
    • T (Tapped)
    • ZT (Counterbore Tapped)

    Clear

  • Pitch P(mm)

    • 30
    • 40
    • 60

     [20-60/1mm Unit(s)]

    Clear

  • Fixed / Designated Pitch

    • Configurable Type
    • Fixed Type

    Clear

  • Application

    • For Water Hydraulic
    • For hydraulic / Water Pressure
    • Pneumatic

    Clear

  • Drawing G Part Thread Dia. NPT Selection [G]

    • 1/2 [G4N]
    • 1/4 [G2N]
    • 1/8 [G1N]
    • 3/8 [G3N]

    Clear

  • Drawing G Part Thread Dia. PT/PF, M (Coarse) Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Drawing K Part Thread Dia. NPT Selection [K]

    • 1/2 [K4N]
    • 1/4 [K2N]
    • 1/8 [K1N]
    • 3/8 [K3N]

    Clear

  • Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6
    • 8

    Clear

  • Drawing R Part Thread Dia. NPT Selection [R]

    • 1/4 [R2N]
    • 1/8 [R1N]
    • 3/8 [R3N]

    Clear

  • Drawing R Part Thread Dia. PT/PF, M (Coarse) Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

    Clear

  • Drawing S Part Thread Dia. NPT Selection [S]

    • 1/4 [S2N]
    • 1/8 [S1N]
    • 3/8 [S3N]

    Clear

  • Drawing S Part Thread Dia. PT/PF, M (Coarse) Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4)

    • 1
    • 2
    • 3
    • 4
    • 5
    • 6

    Clear

  • type

    • BMIAB
    • BMIAF
    • BMIAFA
    • BMIAL
    • BMIF
    • BMIFLR
    • BMIFLRP
    • BMIFP
    • BMIFR
    • BMIFRP
    • BMIFS
    • BMIL
    • BMIS
    • BMISP
    • G-BMIAB
    • G-BMIAF
    • G-BMIAFA
    • G-BMIAL
    • G-BMIF
    • G-BMIFLR
    • G-BMIFLRP
    • G-BMIFP
    • G-BMIFR
    • G-BMIFRP
    • G-BMIFS
    • G-BMIL
    • G-BMIS
    • G-BMISP

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 8 Days or Less
    • 9 Days or Less
    • 10 Days or Less
    • 12 Days or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

Technical Inquiry

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information
Contact Us

Inquiry Format

Go to Mobile site

Copyright © MISUMI Corporation All Rights Reserved.