(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Manifold Blocks - Hydraulic, Outlets 3 Sides, No Inlets, Configurable Mounting Holes

Volume Discount
Lead Time Reduction

MISUMI

Large orders for 20~50 pcs. are available! G(PF) screws can be specified also.

inCAD Components

(i)Caution

The standards for the 40 sq. type (BMAFA, BMAFMA, BMAFRA, BMAFSA, BMAFCA, BMAFPA) will be revised starting September 2021.
Before the standards are revised, the part numbers will be BMAF, BMAFM, BMAFR, BMAFS, BMAFC and BMAFP.
*After the standards are revised, the E dimension will change from 20 mm to 25 mm.
Product URL for pre-revision specification:https://mx.misumi-ec.com/en/vona2/detail/110310530549/

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
Catalog

Type								Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard					Pitch (P) Configurable
25 × 32 Sq.	40 Sq.	50 Sq.	60 Sq.	70 Sq.	40 Sq.	50 Sq.	60 Sq.
BMAS	BMAFA	BMAFL	BMAFLK	BMAL	BMAFPA	BMAFLP	BMAFLKP	Steel for General Structure	Trivalent Chromate	20.6 MPa ≈ 210 kgf/cm² or less
—	BMAFMA	BMAFLM	—	BMALM	—	BMAFLMP	—	Steel for General Structure	Electroless Nickel Plating
BMASR	BMAFRA	BMAFLR	—	—	—	—	—	SUS304	—
—	BMAFSA	—	—	—	—	—	—	SUS316
—	BMAFCA	—	—	—	—	—	—	Brass		1 MPa ≈ 10 kgf/cm² or less

Specification Table

Part Number

—

Type

Mounting Hole Change

Number of Circuits

BMAF
BMAFLP
G−BMAFLP

NA
NA

4
3
3

—
—
—

Q3
Q3
Q3

—
—
—

R2
R4
R4

—
—
—

S3
S4
S4

—
—

P45
P45

(G Thread)

Part Number				Rc (PT), NPT Selection	Pitch P		Number of Pitches N	Total Number of Q, R and S Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	Q, R, S	Standard Type	Configurable Type 1 mm Increments									M
(25 × 32 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped) YZ (Side Counterbore) YN (Side Through)	1	1(1/8)	—	—	0	3	25	32	20	16	7.5	7	M5
Pitch Standard BMAS BMASR			2		25		1	6
			3				2	9
			4				3	12
			5				4	15
			6				5	18
			7				6	21
			8				7	24
(40 Sq.)			1		—	—	0	3	40	40	25	20	7.5	7	M6
Pitch Standard BMAFA BMAFMA BMAFRA BMAFSA BMAFCA (Standard Change: E dimension)	Pitch Configurable BMAFPA		2	1(1/8)	40	25 to 50	1	6
			3	2(1/4)			2	9
			4	3(3/8)			3	12
			5	1N (NPT1/8)			4	15
			6	2N (NPT1/4)		30 to 50	5	18
			7	3N (NPT3/8)			6	21
			8				7	24
(50 Sq.)			1		—	—	0	3	50	50	30	25	7.5	8	M8
Pitch Standard BMAFL BMAFLM BMAFLR	Pitch Configurable BMAFLP BMAFLMP		2	2(1/4)	60	35 to 60	1	6
			3	3(3/8)			2	9
			4	4(1/2)			3	12
			5	6(3/4)			4	15
			6			40 to 60	5	18
(60 Sq.)			1		—	—	0	3	60	60	30	30	7.5	8	M8
Pitch Standard BMAFLK	Pitch Configurable BMAFLKP		2	2(1/4)	60	35 to 60	1	6
			3	3(3/8)			2	9
			4	4(1/2)			3	12
			5	6(3/4)			4	15
			6			40 to 60	5	18
(70 Sq.)			1		—	—	0	3	70	70	40	35	10	10	M8
Pitch Standard BMAL BMALM			2	6(3/4)	60		1	6
			3	8(1)			2	9
			4				3	12

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering.(Ex.: G-BMAF)For ordering, see the Ordering Example.
For Q, R and S, specify 1, 2, 3, 4, 6, 8, 1N, 2N or 3N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. SUS316 or Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.
For Block Square 50 Type, when 3/4 is selected for both tapered threads at right angles, the tapered male threads may interfere with each other. Select Block Square 60 Type instead.
Select NA, T or ZT for the mounting hole shape of 7 and 8 Circuit Types .

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMAFA3
BMAFA4
BMAFA5
BMAFA6
BMAFA7
BMAFA8
BMAFANA2
BMAFANA3-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA3-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA3-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA3-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFANA3-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA3-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA3-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA3-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFANA4
BMAFANA5
BMAFANA6-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA6-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA6-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA6-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFANA6-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA6-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA6-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA6-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFANA7
BMAFANA8-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA8-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA8-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA8-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFANA8-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFANA8-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFANA8-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFANA8-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFAT1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT1-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT1-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT1-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFAT1-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT1-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT1-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT1-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFAT2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT2-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT2-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT2-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFAT2-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT2-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT2-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT2-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFAT3-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT3-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT3-[Q1N,Q2N,Q3N]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT3-[Q1N,Q2N,Q3N]-R[1,2,3]-S[1,2,3]
BMAFAT3-Q[1,2,3]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT3-Q[1,2,3]-[R1N,R2N,R3N]-S[1,2,3]
BMAFAT3-Q[1,2,3]-R[1,2,3]-[S1N,S2N,S3N]
BMAFAT3-Q[1,2,3]-R[1,2,3]-S[1,2,3]
BMAFAT4-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-[S1N,S2N,S3N]
BMAFAT4-[Q1N,Q2N,Q3N]-[R1N,R2N,R3N]-S[1,2,3]

Minimum order quantity	Volume Discount	Days to Ship	RoHS	Flow	Material	Surface Treatment	Block Size (mm)	Number of circuits (Ream)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Fixed / Designated Pitch	Application	Drawing G Part Thread Dia. PT/PF Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)	Drawing Q Part Thread Dia. NPT Selection [Q]	Drawing Q Part Thread Dia. PT/PF Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Drawing R Part Thread Dia. NPT Selection [R]	Drawing R Part Thread Dia. PT/PF Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Drawing S Part Thread Dia. NPT Selection [S]	Drawing S Part Thread Dia. PT/PF Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	4	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	5	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	7	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	4	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	5	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	6	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)	Available	12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	7	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	-	-	-	-	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	8	Standard Thread {PT, M (Coarse) Thread}	NA (Through)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	1	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	2	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	3	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	-	1 ～ 3	-	1 ～ 3	-	1 ～ 3
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	4	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	1/4 [S2N] / 1/8 [S1N] / 3/8 [S3N]	-
1 Piece(s)		12 Days or more	-	T Shaped Hole Type	[1018 Carbon Steel] Steel for General Structure	Trivalent Chromate	40×40	4	Standard Thread {PT, M (Coarse) Thread}	T (Tapped)	40	Fixed Type	For hydraulic / Water Pressure	-	-	1/4 [Q2N] / 1/8 [Q1N] / 3/8 [Q3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	1 ～ 3

1
2
3
4
5
Next >>

Product TOP

Configure

1,956 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Material
- 1018 Carbon Steel
- 304 Stainless Steel
- 316 Stainless Steel
- Brass
- A5052
- 1018 Carbon Steel
  - Steel for General Structure
Clear
Surface Treatment
- No
- Trivalent Chromate
- Electroless Nickel Plating
- Clear Anodize
Clear
Block Size(mm)
- 25×32
- 40×40
- 50×50
- 60×60
- 70×70
Clear
Number of circuits(Ream)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, M (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- YN (Side Through)
- YZ (Side Counterbore)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
25

40

60
[25-60/1mm Unit(s)]
Clear
Fixed / Designated Pitch
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
- Pneumatic
Clear
Drawing G Part Thread Dia. PT/PF Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
2

3

4

6
Clear
Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)
2

3

4

6
Clear
Drawing Q Part Thread Dia. NPT Selection [Q]
- 1/4 [Q2N]
- 1/8 [Q1N]
- 3/8 [Q3N]
Clear
Drawing Q Part Thread Dia. PT/PF Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

5

6

8
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
- 3/8 [R3N]
Clear
Drawing R Part Thread Dia. PT/PF Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Drawing S Part Thread Dia. NPT Selection [S]
- 1/4 [S2N]
- 1/8 [S1N]
- 3/8 [S3N]
Clear
Drawing S Part Thread Dia. PT/PF Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
type
- BMAFA
- BMAFCA
- BMAFL
- BMAFLK
- BMAFLKP
- BMAFLM
- BMAFLMP
- BMAFLP
- BMAFLR
- BMAFMA
- BMAFPA
- BMAFRA
- BMAFSA
- BMAL
- BMALM
- BMAS
- BMASR
- G-BMAFA
- G-BMAFCA
- G-BMAFL
- G-BMAFLK
- G-BMAFLKP
- G-BMAFLM
- G-BMAFLMP
- G-BMAFLP
- G-BMAFLR
- G-BMAFMA
- G-BMAFPA
- G-BMAFRA
- G-BMAFSA
- G-BMAL
- G-BMALM
- G-BMAS
- G-BMASR
- G-BMTF
- G-BMUFL
- G-BMUFLP
- G-BMZAFLAP
Clear
Flow
- T Shaped Hole Type
- Blind Lateral Hole•Upper Hole Type
- Lateral Through Holes•T-shaped Hole Type
- Lateral Through Holes•L-shaped Hole Type
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Days or Less

9 Days or Less

10 Days or Less

12 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Hydraulic Hose Adaptors - Long Straight Fitting, Female, PT Threaded, PF Threaded
MISUMI Days to Ship : 8 Days or more
Hydraulic Hose Adaptors - 90° Elbow Fitting, PT Threaded, PF Tapped
MISUMI Days to Ship : 8 Days or more
Hydraulic Hose Adaptors - 90° Elbow Swivel Fitting, PT Threaded, PT/PF Tapped or Threaded
MISUMI Days to Ship : 8 Days or more
Pipe Fitting - Plug, Tapered, Threaded
MISUMI Days to Ship : Same day or more
Pipe Fitting - Union, Configurable Tip
MISUMI Days to Ship : 8 Days or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Manifold Blocks - Hydraulic, Outlets 3 Sides, No Inlets, Configurable Mounting Holes

(i)Caution

Specification Table

Part Number

Configure

Specification/Dimensions

Material

Surface Treatment

Block Size(mm)

Number of circuits(Ream)

Thread Size / Type

Mounting Hole Change

Pitch P(mm)

Fixed / Designated Pitch

Application

Drawing G Part Thread Dia. PT/PF Selection [G] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

Drawing K Part Thread Dia. PT/PF, M (Coarse) Selection [K] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 5(M5) 6(3/4) 8(1)

Drawing Q Part Thread Dia. NPT Selection [Q]

Drawing Q Part Thread Dia. PT/PF Selection [Q] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

Drawing R Part Thread Dia. NPT Selection [R]

Drawing R Part Thread Dia. PT/PF Selection [R] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

Drawing S Part Thread Dia. NPT Selection [S]

Drawing S Part Thread Dia. PT/PF Selection [S] 1 (1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)

type

Flow

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)