(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
Inserts - Threaded, Stainless Steel, Coarse (HLTS3-6)
- Volume Discount
•Operating Environment: Manufacturing Equipment
•Application: Light Metal
•Material: 304 Stainless Steel
•Screw Type: Metric (fine) Thread
- inCAD Components
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Unit examples related to this product
Part Number
Configured Part Number is shown.
HLTS3-6
-
- Order Qty.
-
- Unit Price (USD)
(with VAT (USD)) - ---
- Unit Price (USD)
-
- Sub-Total (USD)
(with VAT (USD)) - ---
- Sub-Total (USD)
-
- Estimated Ship Date
- ---
Configured Specifications
| Application | Light Metal | Material | [Stainless steel (SUS303 / SUS304)] 304 Stainless Steel |
|---|---|---|---|
| Screw Type | - | Thread Diameter (Inserted) M(mm) | 3 |
| Length (After Insertion) L (D = Screw Shaft Dia. M) | 2D | Operating Environment | Manufacturing Equipment |
| Pitch(mm) | - | RoHS | 10 |
・Materials
[ M ]Material: 304 Stainless Steel
[ M ]Material: 304 Stainless Steel
Specifications
| Part Number | - | L | - | Pitch |
| HLTS3 HLTX5 HLSS10 HLSX | - - - | 4.5 15 8 | - - | 1.25 1.0 |
■Threaded Inserts
*M (Coarse Thread) and L are the sizes after insertion. L dimension before insertion is shorter than that after the insertion.
| Part Number | *(L) After Insertion | Pitch | Tap Pilot Hole Dia. (Reference) | |||
| Type | *M | |||||
| HLTS (Coarse) | 3 | 3 | 4.5 | 6 | 0.5 | 3.11~3.20 |
| 4 | 4 | 6 | 8 | 0.7 | 4.16~4.29 | |
| 5 | 5 | 7.5 | 10 | 0.8 | 5.18~5.33 | |
| 6 | 6 | 9 | 12 | 1.0 | 6.22~6.40 | |
| 8 | 8 | 12 | 16 | 1.25 | 8.28~8.48 | |
| 10 | 10 | 15 | 20 | 1.5 | 10.33~10.56 | |
| 12 | 12 | 18 | 24 | 1.75 | 12.38~12.64 | |
| 16 | 16 | 24 | 32 | 2.0 | 16.44~16.73 | |
| Part Number | *(L) After Insertion | Pitch | Tap Pilot Hole Dia. (Reference) | |||
| Type | *M | |||||
| HLSS (Fine) | 8 | 8 | 16 | 24 | 1.0 | 8.28~8.48 |
| 10 | 10 | 15 | 1.0 | 10.33~10.56 | ||
| 10 | 15 | 20 | 1.25 | |||
| 12 | 12 | 18 | 1.25 | 12.38~12.64 | ||
| 12 | 24 | 1.5 | ||||
■Coil turns (Reference)
| Part Number | Pitch | Coil turns | ||||||||
| *(L) after insertion (D = thread diameter M) | ||||||||||
| Type | *M | 1D | 1.5D | 2D | 3D | |||||
| HLTS (Coarse) | 2 | 0.4 | 3 | 1 | 5 | 1 | 7 | 3 | - | |
| 4 | 2 | 4 | ||||||||
| 2.2 | 0.45 | 3 | 1 | 5 | 3 | 7 | 5 | - | ||
| 8 | 8 | 8 | ||||||||
| 2.5 | 0.45 | 3 | 3 | 6 | 3 | 8 | 7 | - | ||
| 4 | 8 | 8 | ||||||||
| 2.6 | 0.45 | 4 | 6 | 5 | 9 | 1 | - | |||
| 8 | 4 | |||||||||
| 3 | 0.5 | 4 | 6 | 5 | 9 | 1 | - | |||
| 8 | 4 | |||||||||
| 3.5 | 0.6 | 3 | 7 | 6 | 1 | 9 | - | |||
| 8 | 2 | |||||||||
| 4 | 0.7 | 3 | 7 | 6 | 3 | 8 | 7 | - | ||
| 8 | 8 | 8 | ||||||||
| 5 | 0.8 | 4 | 3 | 7 | 1 | 9 | 7 | - | ||
| 8 | 8 | 8 | ||||||||
| 6 | 1 | 4 | 1 | 7 | 1 | 10 | - | |||
| 4 | 8 | |||||||||
| 8 | 1.25 | 4 | 5 | 7 | 3 | 10 | 1 | - | ||
| 8 | 8 | 4 | ||||||||
| 10 | 1.5 | 5 | 8 | 11 | - | |||||
| 12 | 1.75 | 5 | 8 | 1 | 11 | 3 | - | |||
| 4 | 8 | |||||||||
| 14 | 2 | 5 | 1 | 8 | 1 | 11 | 3 | - | ||
| 4 | 2 | 4 | ||||||||
| 16 | 2 | 6 | 1 | 9 | 7 | 13 | 1 | - | ||
| 8 | 8 | 2 | ||||||||
| 18 | 2.5 | 5 | 5 | 9 | 12 | 1 | - | |||
| 8 | 2 | |||||||||
| Part Number | Pitch | Coil turns | ||||||||
| *(L) after insertion (D = thread diameter M) | ||||||||||
| Type | *M | 1D | 1.5D | 2D | 3D | |||||
| HLSS (Fine) | 6 | 0.75 | 5 | 7 | 9 | 3 | 12 | 7 | - | |
| 8 | 8 | 8 | ||||||||
| 8 | 1 | 6 | - | 13 | 20 | 1 | ||||
| 8 | ||||||||||
| 10 | 1 | 7 | 7 | 12 | 3 | - | - | |||
| 8 | 8 | |||||||||
| 1.25 | 5 | 7 | 9 | 1 | 13 | 1 | - | |||
| 8 | 2 | 8 | ||||||||
| 12 | 1.25 | 7 | 3 | 11 | 5 | - | - | |||
| 8 | 8 | |||||||||
| 1.5 | 6 | - | 13 | 1 | - | |||||
| 8 | ||||||||||
| 14 | 1.5 | 7 | 11 | 1 | 15 | 3 | - | |||
| 8 | 8 | |||||||||
| 16 | 1.5 | 8 | 1 | 13 | 3 | 18 | 1 | - | ||
| 2 | 8 | 8 | ||||||||
| 18 | 1.5 | 9 | 3 | 15 | 1 | 20 | 5 | - | ||
| 4 | 8 | 8 | ||||||||
*M and L indicated above are sizes measured when the threaded insert is inserted into tapped holes. Before insertion,
L dimension is shorter than after the insertion.
[ ! ]For orders larger than the indicated quantity, please check with WOS.
Part Number
Loading...
Basic Information
| Application | Light Metal | Material | 304 Stainless Steel | Operating Environment | Manufacturing Equipment |
|---|
Please check the type/dimensions/specifications of the part HLTS3-6 in the Inserts - Threaded, Stainless Steel, Coarse series.
Stock
-
- Stock Item Only
Specification/Dimensions
-
Screw Type
- Fine Thread
-
Pitch(mm)
- 1
- 1.25
- 1.5
-
type
- HLSS
- HLTS
-
Thread Diameter (Inserted) M(mm)
-
Length (After Insertion) L (D = Screw Shaft Dia. M)
- 1D
- 1.5D
- 2D
- 3D
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| HLSS10-15-1.25 |
| HLSS10-20-1.25 |
| HLSS12-12-1.25 |
| HLTS4-4 |
| HLTS4-6 |
| HLTS4-8 |
| Part Number |
|---|
Additional Products in this Category
- Inserts - Threaded, Metric Coarse, Locking
- Inserts - Threaded, Stainless Steel, E-Sert
- Inserts - Threaded, Stainless Steel, with Notch, Metric
- Inserts - Recoil Threaded, Nitronic 60
- Inserts - Self Tapping, Slotted, Small Outside Diameter, Type 303
- Inserts - Self Tapping, Three Hole, Short, Type 307
- Inserts - Self Tapping, Small Outside Diameter, Three Hole, Short, Type 347
- Inserts - Press Fit, SHK Type
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy