(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Strut Clamps - Rotative, same or different hole diameter.
- Volume Discount
•Type: Flexible (Rotation)
•Post Shape: Round
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
[ ! ]Accessories: CB (Click here) and MSSK (Click here) screws are included with black oxide/black anodized products. SCB (Click here) and MSSU (Click here) screws are included with the other products.
| Type | [ M ]Material | [ S ]Surface Treatment | [ A ]Accessories | |
| Equal Dia., Rotation | Unequal Dia., Rotation | |||
| KLSR | KDSR | 1018 Carbon Steel | Black Oxide | Hex Socket Head Set Screw |
| MLKR | MDKR | Electroless Nickel Plating | ||
| ALKR | ADKR | 6063 Aluminum Alloy | Black Anodize | |
| SLKR | SDKR | 304 Stainless Steel | - | |
Specifications
| Part Number | - | D1 |
| MLKR10 KDSR8 | - | 12 |
■Equal Dia., Rotation
| Part Number | D1 | A | B | P | P1 | P2 | L1 | L2 | E | H | J | M | N | d | d1 | Z | C | ||||
| Type | DH7 | g6 | H7 | ||||||||||||||||||
| KLSR MLKR ALKR SLKR | 8 | + 0.015 0 | 5 | - 0.004 - 0.012 | + 0.012 0 | 42 | 12 | 19 | 7 | 12 | 6 | 6.3 | 11.5 | 3 | 7 | M3 | M3 | 3.5 | 6.0 | 3 | 2 |
| 10 | 51 | 13 | 23 | 9 | 14 | 14.0 | 9 | M4 | 4.5 | 7.5 | 5 | ||||||||||
| 12 | + 0.018 0 | 57 | 15 | 26 | 11 | 15 | 15.5 | 10 | |||||||||||||
| 15 | 10 | - 0.005 - 0.014 | + 0.015 0 | 65 | 19 | 33 | 12 | 21 | 10 | 10.3 | 16.0 | 5 | 10.5 | M4 | M4 | 4.5 | 7.5 | 5 | 3 | ||
| 20 | + 0.021 0 | 76 | 25 | 39 | 15 | 24 | 18.5 | 13 | |||||||||||||
| 25 | 88 | 30 | 44 | 18 | 26 | 22.0 | 16 | M5 | M5 | 5.5 | 9.0 | 5.5 | 4 | ||||||||
| [ ! ]The tolerance and perpendicularity of DH7 is before slitting. [ ! ]For mating, g6, f8 shaft tolerances are recommended. Use of a long wrench is recommended for fastening. | |||||||||||||||||||||
■Unequal Dia., Rotation
| Part Number | D1H7 | F | A | B1 | B2 | P | P1 | P2 | L1 | L2 | E1 | E2 | H | J1 | J2 | M1 | M2 | N | d1 | d2 | e1 | e2 | Z1 | Z2 | C1 | C2 | |||||
| Type | DH7 | g6 | H7 | ||||||||||||||||||||||||||||
| KDSR MDKR ADKR SDKR | 8 | + 0.015 0 | 10 | + 0.015 0 | 5 | - 0.004 - 0.012 | + 0.012 0 | 46.5 | 12 | 13 | 21 | 7 | 14 | 6 | 6.3 | 11.5 | 14 | 3 | 7 | 9 | M3 | M4 | M3 | 3.5 | 4.5 | 6 | 7.5 | 3 | 5 | 2 | 2 |
| 8 | 12 | + 0.018 0 | 49 | 12 | 15 | 22 | 7 | 15 | 11.5 | 15.5 | 7 | 10 | M3 | M4 | M3 | 3.5 | 4.5 | 6 | 7.5 | 3 | 5 | 2 | 2 | ||||||||
| 10 | 12 | 53.5 | 13 | 15 | 24 | 9 | 15 | 14 | 15.5 | 9 | 10 | M4 | M4 | M3 | 4.5 | 4.5 | 7.5 | 7.5 | 5 | 5 | 2 | 2 | |||||||||
| 15 | + 0.018 0 | 20 | + 0.021 0 | 10 | - 0.005 - 0.014 | + 0.015 0 | 70.5 | 19 | 25 | 36 | 12 | 24 | 10 | 10.3 | 16 | 18.5 | 5 | 10.5 | 13 | M4 | M4 | M4 | 4.5 | 4.5 | 7.5 | 7.5 | 5 | 5 | 3 | 3 | |
| 15 | 25 | 76 | 19 | 30 | 38 | 12 | 26 | 16 | 22 | 10.5 | 16 | M4 | M5 | M5 | 4.5 | 5.5 | 7.5 | 9 | 5 | 5.5 | 3 | 4 | |||||||||
| 20 | + 0.021 0 | 25 | 81.5 | 25 | 30 | 41 | 15 | 26 | 18.5 | 22 | 13 | 16 | M4 | M5 | M5 | 4.5 | 5.5 | 7.5 | 9 | 5 | 5.5 | 3 | 4 | ||||||||
| [ ! ]The tolerance and perpendicularity of DH7, D1H7 are the tolerances before slitting. [ ! ]For the available sizes, refer to the price list. [ ! ]For mating, g6, f8 shaft tolerances are recommended. Use of a long wrench is recommended for fastening. | |||||||||||||||||||||||||||||||
■Included Screw
| D | Included Screw | |
| Equal Dia., Rotation | Unequal Dia., Rotation | |
| 8 | M3-8, 2 pcs. | M3-8/M4-8, 1 pc. each |
| 10 | M4-8, 2 pcs. | M3-8/M4-10, 1 pc. each |
| 12 | M4-10, 2 pcs. | M4-8/M4-10, 1 pc. each |
| 15 | M4-12, 2 pcs. | M4-12/M4-20, 1 pc. each |
| 20 | M4-20, 2 pcs. | M4-12/M5-20, 1 pc. each |
| 25 | M5-20, 2 pcs. | M4-20/M5-20, 1 pc. each |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SDKR8-10 |
| SDKR8-12 |
| SDKR10-12 |
| SDKR15-20 |
| SDKR20-25 |
| SLKR8 |
| SLKR10 |
| SLKR12 |
| SLKR15 |
| SLKR20 |
| SLKR25 |
Loading...
Basic Information
| Type | Flexible (Rotation) | Post Shape | Round |
|---|
Specification/Dimensions
-
Posts Dia.(mm)
-
Combined Posts Dia.
- Equal Dia.
- Unequal Dia.
-
Surface Treatment
- Electroless Nickel Plating
- Black Oxide Coating
- Black Anodize
- Not Provided
-
type
- ADKR
- ALKR
- KDSR
- KLSR
- MDKR
- MLKR
- SDKR
- SLKR
-
Material
- Steel
- Stainless Steel
- Aluminum
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compact Strut Clamps - Rounded ends, perpendicular type, same or different hole diameter.
- Strut Clamps - Perpendicular type, different hole diameter (Inches).
- Strut Clamps - Type T, Cross Direction, FCTA/FCTS Series.
- Strut Clamps - Free Rotating, FCFA/FCFS series.
- Strut Clamp - Square shaft, with slot.
- Strut Clamps - Same diameter hole, vertical and horizontal hole.
- Structural Pipe Clamps - Rotating type, same diameter hole.
- Structural Pipe Clamp - Different diameter hole, round shape, with groove.
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy