(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Indexing Plungers - Knob type, metric fine or coarse thread.
- On Sale Till 15/12/2024
- Volume Discount
•Type: Standard Knob
•Overall Length: Standard
•Mounting Method: Screw-In
•Locking Mechanism: Without Locking Nose
•Operation Knob: Provided
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Screw | Return Type | Rest Position | Knob | Main Body | Pin | Spring | (Lock Nut) | ||||
| [ M ]Material | [ M ]Material | [ S ]Surface Treatment | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | [ M ]Material | [ M ]Material | [ S ]Surface Treatment | |||
| Fine Thread | PXA | PXYA | Nylon 6 (Mat Black) | 12L13 Carbon Steel | Black Oxide | 1045 Carbon Steel | 50~60HRC | Black Oxide | SWP-B | - | - |
| PXK | PXYK | 1045 Carbon Steel | Black Oxide | ||||||||
| SXPA | - | 303 Stainless Steel | - | 303 Stainless Steel | - | Nickel Plating | 301 Stainless Steel | - | - | ||
| SXPK | SXYK | 303 Stainless Steel | - | ||||||||
| Coarse Thread | PMXA | PMXYA | 12L13 Carbon Steel | Trivalent Chromate | - | - | - | ||||
| PMXK | PMXYK | 1045 Carbon Steel | Trivalent Chromate | ||||||||
Specifications
| Part Number |
| SXPA16 PMXK10M |
■Fine Thread
[ ! ]Min. S dimension of Rest Position Type M16 is shown in the ( ).
kgf=Nx0.101972
| M | Pitch (Fine Thread) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | SW1 | SW2 | Load (N) | Mass (g) | |||||||
| Return Type | Rest Position | PXA, PXYA, PXK, PXYK | SXPA, SXPK, SXYK | PXA SXPA | PXK SXPK | PXYA | PXYK SXYK | ||||||||||||||
| min. | max. | min. | max. | ||||||||||||||||||
| 10 | 1.0 | 21 | 13.8 | 5 | 5 | 45 | 51 | 17 | 5 | 15 | 5 | 12 | 17 | 7 | 17 | 6 | 15 | 20 | 27 | 23 | 30 |
| 12 | 1.5 | 25 | 16.2 | 6 | 6 | 54.5 | 61 | 20 | 6 | 17 | 6 | 14 | 18 | 9 | 24 | 8 | 21 | 32 | 42 | 38 | 48 |
| 16 | 1.5 | 31 | 21.9 | 8 | 8 (7) | 69 | 75.5 | 26 | 8 | 23 | 8 | 19 | 24 | 11 | 30 | 9 | 26 | 70 | 90 | 79 | 99 |
kgf=Nx0.101972
■Coarse Thread
kgf=Nx0.101972
| Part Number | Pitch (Coarse) | D | D1 | B | S min. | L | L1 | L2 | L3 | L4 | L5 | SW1 | SW2 | Load (N) | Mass (g) | ||||||
| Return Type | Rest Position | ||||||||||||||||||||
| Type | M | min. | max. | PMXA | PMXK | PMXYA | PMXYK | ||||||||||||||
| PMXA PMXK PMXYA PMXYK | 6M | 1.0 | 12 | 6.9 | 4 | 4 | 30.5 | 33 | 12 | 4.5 | 10 | 3.2 | 7 | 6 | 10 | 3 | 12 | 5 | 9 | 4 | 8 |
| 8M | 1.25 | 16 | 9.2 | 5 | 5 | 40 | 43.5 | 16 | 6 | 14 | 4 | 9.5 | 8 | 13 | 5 | 24 | 10 | 15 | 11 | 16 | |
| 10M | 1.5 | 18 | 11.5 | 6 | 6 | 49 | 52 | 20 | 7.5 | 18 | 5 | 10.5 | 10 | 16 | 5 | 21 | 17 | 24 | 18 | 15 | |
| 12M | 1.75 | 21 | 13.8 | 8 | 8 | 59 | 63.5 | 24 | 9 | 22 | 6 | 13.5 | 12 | 18 | 6 | 22 | 31 | 41 | 36 | 46 | |
Since the Coarse Thread Type (PMXA, PMXK, PMXYA, PMXYK) do not exceed the tightening torques shown in the table to the right.
| M | Allowable Tightening Torque (N·m) |
| 6 | 1.5 |
| 8 | 9 |
| 10 | 20 |
| 12 | 25 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PMXA6M |
| PMXA8M |
| PMXA10M |
| PMXA12M |
| PMXK6M |
| PMXK8M |
| PMXK10M |
| PMXK12M |
| PMXYA6M |
| PMXYA8M |
| PMXYA10M |
| PMXYA12M |
| PMXYK6M |
| PMXYK8M |
| PMXYK10M |
| PMXYK12M |
| SXPA10 |
| SXPA12 |
| SXPA16 |
| SXPK10 |
| SXPK12 |
| SXPK16 |
| SXYK10 |
| SXYK12 |
| SXYK16 |
Loading...
Basic Information
| Type | Standard type | Mounting Method | Screw-In | Full Length | Standard |
|---|---|---|---|---|---|
| Knob | Presence |
Stock
-
- Stock Item Only
Specification/Dimensions
-
Locking Mechanism
- Returning
-
Body Material
- Steel
- Steel
-
Pin Material
- 1045 Carbon Steel
- Stainless Steel
-
Thread Diameter M(mm)
-
Stroke (S)(mm)
-
Body Surface Treatment
- No
- Black Oxide
- Trivalent Chromate
-
Surface Treatment of Pin
- No
- Black Oxide
- Nickel Plating
-
Tip outer diameter B(Ø)
-
Length L(mm)
-
Thread Diameter M
- 6
- 8
- 10
- 12
- 16
-
D dimension(φ)
- 12
- 16
- 18
- 21
- 25
- 31
-
Accessory
- Lock Nuts
- None
-
Screw Type
- Coarse Thread
- Fine Thread
-
type
- PMXA
- PMXK
- PMXYA
- PMXYK
- PXA
- PXK
- PXYA
- PXYK
- SXPA
- SXPK
- SXYK
-
Nose Heat Treatment
- No
- Hardening
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- Same day
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Indexing Plungers - Knob type with threaded tip, metric fine thread.
- Indexing Plungers - Short Thread Length, PSX Series.
- Indexing Plungers - Knobless, Press Fit, IPWN Series.
- Indexing Plungers - Lever Type, Fine Thread, ILP-SUS Series.
- Cast Iron Clamping Blocks - For indexers.
- Clamping Blocks - For indexers.
- Indexing Plungers - Precision with tapered stem.
- Manual Knobs - For indexer positioning.
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy