(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Locating Pins for Jigs & Fixtures - Shouldered, Set Screw Flat, Configurable (Part Numbers)
•Shape: With Shoulder
•Head Tip Shape: Tip End R
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ H ]Hardness | ||
| Round | Diamond | |||
| FLATA | FLATD | 4137 Alloy Steel | Treated Hardness | 35~40HRC |
| FTLATA | FTLATD | SCM415 Alloy Steel (JIS) | Carburized Hardness | 55HRC~ |
| FSLATA | FSLATD | 304 Stainless Steel | - | |
| FCLATA | FCLATD | 440C or 420 Stainless Steel | Treated Hardness | 50~55HRC |
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |
| R-FATA | Round | 4137 Alloy Steel | 35~40HRC (Surface 750HV ~ ) | Hard Chrome Plating |
| R-FATD | Diamond | |||
| D-FATA | Round | D2 Tool Steel Equivalent | 55HRC ~ (Surface 3000HV) | Dicoat® Treated |
| D-FATD | Diamond | |||
Specifications
| Part Number | - | P | - | B | - | L | - | T |
| FLANA6 FSLATA12 | - - | P6.8 P9.6 | - - | B10.5 B21.5 | - - | L5 L10 | - - | T3.1 T5.3 |
| Part Number | D | P 0.1mm Increment | B 0.1mm Increment | L 1mm Increment | T 0.1mm Increment | ℓ1 | H | d | R | Applicable Set Screw | W | ||||||
| Type | |||||||||||||||||
| Hardened (Round) FLATA (Diamond) FLATD | Carburized (Round) FTLATA (Diamond) FTLATD | 304 Stainless Steel (Round) FSLATA (Diamond) FSLATD | 440C or 420 Stainless Steel (Round) FCLATA (Diamond) FCLATD | Hard Chrome (Round) R-FATA (Diamond) R-FATD | Dicoat (Round) D-FATA (Diamond) D-FATD | 6 | 3.0~8.0 | 2.0~28.0 | 5~10 | 2.0~10.0 | 8 | 9 | 4 | 1 | M5 | 1~2 | |
| 8 | 3.0~10.0 | 2.0~35.0 | 5~10 | 8 | 11 | 5 | 1.5 | M5 | 1~2 | ||||||||
| 10 | 5.0~12.0 | 3.0~35.0 | 8~15 | 8 | 13 | 7 | 2 | M6 | 2~3 | ||||||||
| 12 | 7.0~14.0 | 3.0~35.0 | 10~18 | 10 | 15 | 9 | 3 | M6 | 4 | ||||||||
| 16 | 13.0~18.0 | 5.0~35.0 | 10~20 | 10 | 19 | 13 | 4 | M8 | 5 | ||||||||
| 20 | 16.0~22.0 | 5.0~35.0 | 10~20 | 10 | 23 | 17 | 4 | M8 | 5 | ||||||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| D-FATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| D-FATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| D-FATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| D-FATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| D-FATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FCLATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FCLATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FCLATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FCLATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FCLATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FCLATA20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FLATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FLATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FLATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FLATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FLATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FLATA20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FLATD6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FLATD8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FLATD10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FLATD12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FLATD16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FLATD20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FSLATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FSLATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FSLATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FSLATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FSLATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FSLATA20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FSLATD6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FSLATD8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FSLATD10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FSLATD12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FSLATD16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FSLATD20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FTLATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FTLATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FTLATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FTLATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FTLATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FTLATA20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FTLATD6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| FTLATD8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| FTLATD10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| FTLATD12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| FTLATD16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| FTLATD20-P[16-20/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| R-FATA6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| R-FATA8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| R-FATA10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| R-FATA12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| R-FATA16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
| R-FATD6-P[3-7/0.1]-B[2-28/0.1]-L[5-10/1]-T[2-10/0.1] |
| R-FATD8-P[3-9/0.1]-B[2-35/0.1]-L[5-10/1]-T[2-10/0.1] |
| R-FATD10-P[5-12/0.1]-B[3-35/0.1]-L[8-15/1]-T[2-10/0.1] |
| R-FATD12-P[7-13/0.1]-B[3-35/0.1]-L[10-18/1]-T[2-10/0.1] |
| R-FATD16-P[13-16/0.1]-B[5-35/0.1]-L[10-20/1]-T[2-10/0.1] |
Loading...
Basic Information
| Basic Shape | Jig Pin With Collar | Head Tip Shape | Tip R (B shape) |
|---|
Specification/Dimensions
-
Head Shape
-
Round -
Diamond
-
-
Surface Treatment
- Plain
- Hard Chrome
- Dicoat®
-
Heat Treatment
- Immersion Quenching
- No
-
Concentricity (Head-Shank)
- Precision Grade φ0.01
- Precision Grade φ0.02(Dicoat® processing, TiCN processing)
-
Head Dia. Tolerance(mm)
- Precision Grade 0/-0.01
- Precision Grade 0/-0.02 (Dicoat® processing, TiCN processing)
-
Outside Diameter of Holder D(mm)
-
Mounting Section Length L(mm)
-
P
-
Positioning Part Length B(mm)
-
T(mm)
-
type
- D-FATA
- FCLATA
- FLATA
- FLATD
- FSLATA
- FSLATD
- FTLATA
- FTLATD
- R-FATA
- R-FATD
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Days or Less
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins for Jigs & Fixtures - Standard(h7), Shoulder, Threaded
- Locating Pins for Jigs & Fixtures - Threaded
- Locating Pins for Jigs & Fixtures - Set Screw Flat
- Locating Pins for Jigs & Fixtures - Set Screw Flat, Tip Shape Selectable, Precision g6
- Locating Pins for Jigs & Fixtures - Shouldered, Nut Fixing, Inch Measurements
- Locating Pins for Jigs & Fixtures - Set Screw Mount, Set Screw Groove, Tip Shape Selectable
- Locating Pins for Jigs & Fixtures - Threaded, Shouldered/Not Shouldered, Oval Head
- Locating Pins for Jigs & Fixtures - Alumina Coated, Set Screw Groove
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy