(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Precision Ball Screws - Screw diameter 2mm, pitch 5, 10 or 20 millimeters. (Part Numbers)

Precision Ball Screws - Screw diameter 2mm, pitch 5, 10 or 20 millimeters.

Smallest Nut Outer Diameter
For complete product overview and details on Precision Ball Screws - Thread Diameter 20, Lead 5, 10, 20 or 40, Precision Grade C5 or C7 see the sections below:

  • inCAD Components
Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related Image
Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related Image
Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related Image
・Materials
Nut TypeTypeAccuracy GradeShaft Dia.LeadScrew ShaftNut
[ M ]Material[ H ]Hardness[ M ]Material[ H ]Hardness
Standard NutBSSC5205, 10, 204150 Alloy SteelInduction HardenedJIS SCM420Carburized
BSSEC758~62HRC58~62HRC
[ ! ]Ball bearings will fall out if the ball nut crosses the wrench flats.

Specifications

Part Number-L
BSS2005
Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related ImageBSSE2010L
Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related ImageBSSE2010G
-
-
-
820
1000
1000

(L Type Greased)
(G Type Greased)
Nut TypeAccuracy GradePart Number1mm IncrementYBall Dia.Ball Center Dia.Screw Root Dia.Number of CircuitsBasic Load RatingAxial PlayPreload Torque N·cmTwisting Direction
TypeScrew Shaft O.D.LeadLC (Dynamic) kNCo (Static) kN
Standard
Nut
C5BSS2005200~1000L-923.17520.8(17.5)2.5 turns, 1 row8.3517.50.005 or Less3.0 or LessRight
C7BSSE0.030 or Less-
C5BSS10250~1500L-954.762521(16)13.525.10.005 or Less4.0 or Less
C7BSSE0.030 or Less-
C5BSS20250~1500L-95(15.9)1.5 turns,
1 row
9.216.20.005 or Less4.0 or Less
C7BSSE0.030 or Less-
Kgf=Nx0.101972

Price list

Accuracy GradePart NumberUnit Price 1~4 pc(s).
L200
~249
L250
~299
L300
~400
L401
~600
L601
~700
L701
~800
L801
~995
L996
~1000
L1001
~1200
L1201
~1300
L1301
~1495
L1496
~1500
C5BSS200547,61047,61047,61049,05057,38057,38060,48060,480----
C7BSSE200544,37044,37044,37045,81054,09054,09057,24057,240----
C5BSS2010-47,97047,97050,94055,17055,17061,56061,56067,86071,64071,64071,640
C7BSSE2010-44,73044,73047,70051,93051,93058,32058,32064,62068,40068,40068,400
C5BSS2020-54,27054,27056,25060,30060,30062,73062,73071,73074,07074,07074,070
C7BSSE2020-51,03051,03053,01057,06057,06059,49059,49068,49070,83070,83070,830
[ ! ]For orders larger than indicated quantity, please request a quotation.

Alterations

Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related Image
Keyway on Fixed Side Shaft End
Detailed Keyway Dimensions >> Click here

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Part Number
BSS2005-[200-1000/1]
BSS2005G-[200-1000/1]
BSS2005L-[200-1000/1]
BSS2010-[250-1500/1]
BSS2010G-[250-1500/1]
BSS2010L-[250-1500/1]
BSS2020-[250-1500/1]
BSS2020G-[250-1500/1]
BSS2020L-[250-1500/1]
BSSE2005-[200-1000/1]
BSSE2005G-[200-1000/1]
BSSE2005L-[200-1000/1]
BSSE2010-[250-1500/1]
BSSE2010G-[250-1500/1]
BSSE2010L-[250-1500/1]
BSSE2020-[250-1500/1]
BSSE2020G-[250-1500/1]
BSSE2020L-[250-1500/1]
Part NumberMinimum order quantityVolume DiscountDays to Ship RoHSAccuracy Grade Lead
(mm)
Axial Play Number of Circuits
(Rows X Turns)
Screw Total Length L
(mm)
Basic Load Rating, Dynamic Rating
(N)
Basic Load Rating, Static Rating
(N)
Grease Type
1 Piece(s)

10 Days or more

10C550.005 or Less1×2.5200 ~ 1000835017500Standard
1 Piece(s)

12 Days or more

10C550.005 or Less1×2.5200 ~ 1000835017500Type G
1 Piece(s)

12 Days or more

10C550.005 or Less1×2.5200 ~ 1000835017500Type L
1 Piece(s)

10 Days or more

10C5100.005 or Less1×2.5250 ~ 15001350025100Standard
1 Piece(s)

12 Days or more

10C5100.005 or Less1×2.5250 ~ 15001350025100Type G
1 Piece(s)

12 Days or more

10C5100.005 or Less1×2.5250 ~ 15001350025100Type L
1 Piece(s)

10 Days or more

10C5200.005 or Less1×1.5250 ~ 1500920016200Standard
1 Piece(s)

12 Days or more

10C5200.005 or Less1×1.5250 ~ 1500920016200Type G
1 Piece(s)

12 Days or more

10C5200.005 or Less1×1.5250 ~ 1500920016200Type L
1 Piece(s)

10 Days or more

10C750.030 or Less1×2.5200 ~ 1000835017500Standard
1 Piece(s)

12 Days or more

10C750.030 or Less1×2.5200 ~ 1000835017500Type G
1 Piece(s)

12 Days or more

10C750.030 or Less1×2.5200 ~ 1000835017500Type L
1 Piece(s)

10 Days or more

10C7100.030 or Less1×2.5250 ~ 15001350025100Standard
1 Piece(s)

12 Days or more

10C7100.030 or Less1×2.5250 ~ 15001350025100Type G
1 Piece(s)

12 Days or more

10C7100.030 or Less1×2.5250 ~ 15001350025100Type L
1 Piece(s)

10 Days or more

10C7200.030 or Less1×1.5250 ~ 1500920016200Standard
1 Piece(s)

12 Days or more

10C7200.030 or Less1×1.5250 ~ 1500920016200Type G
1 Piece(s)

12 Days or more

10C7200.030 or Less1×1.5250 ~ 1500920016200Type L

Loading...

  1. 1

More Information

Precision Ball Screws - Thread Diameter 20- Lead 5, 10, 20 or 40 - Precision Grade C5 or C7:Related Image
■Combination with Support Units
Ball Screw Part NumberRecommended Support Unit
TypeScrew Shaft O.D.LeadPart NumberShapeFixed SideSupport SidePage
TypeNo.
BSS
BSSE
2005
10
20
BRW15Round >> Click here
BUR15 >> Click here
BSW15Square >> Click here
BUN15 >> Click here
[ ! ]Other than the part numbers shown above, a variety of Support Units are also available. (>> Click here~>> Click here)
■Combination with Nut Brackets
Ball Screw Part NumberRecommended Nut Bracket
TypeScrew Shaft O.D.LeadPart NumberPage
TypeNo.
BSS
BSSE
2005BNFB
BNFM
BNFR
BN
FA
2005S>> Click here
102010S>> Click here
202020S>> Click here
[ ! ]Other than the part numbers shown above, a variety of Nut Brackets are also available. (>> Click here)

■Notes
[ ! ]Filled with lithium soap based grease (Alvania Grease S2 made by Showa Shell Sekiyu K.K).
[ ! ]Cautions: Do not let nuts overrun its stroke or remove nuts from screw shafts.
It may cause balls to fall out or damage ball recirculation parts.
[ ! ]Various grease options are available. For lead time, prices and specifications, >> Click here.
[ ! ]For accuracy of Ball Screws, see >> Click here, >> Click here.
[ ! ]For details of Support Units, see >> Click here~>> Click here.

Technical Information

Applications for different types of grease

Grease Performance

TypeProduct NameMain Characteristic
Type LET-100K (Made by Kyodo Yushi)Excels in heat resistance, oxidation stability, and adhesion. In addition, splash or leakage is reduced.
Type GLG2 (Made by NSK Ltd.)Special grease for linear guides, ball screws and etc. for clean-room use.

Keyway Dimension Details

Located at P on Fixed Side Shaft End

Shaft Diameterbt
Ref.
Dim.
Tol.
(N9)
Ref.
Dim.
Tol.
6-72 -0.004
-0.029
1.2 +0.1
0
8-1031.8
11-1240
-0.03
2.5
13-1753.0
18-2063.5

Peripheral Components

Combination of the following parts are available.

Support Units
(Square, Low Profile)
Support Units
(Round)
Nut Brackets
(Block Type)
Assembly Example

Combination with Support Units and Nut Bracket

Combination with Support Units

Ball Screw Part NumberRecommended Support Unit
TypeScrew Shaft Outer DiameterLeadPart NumberShapeFixed SideSupport SideLink
TypeNo.
BSS
BSSE
2005
10
20
BRW15Round-Detail here
BUR15-Detail here
BSW15Square-Detail here
BUN15-Detail here

*Aside from the part numbers shown above, there are a variety of other Support Units available.

Combination with Nut Bracket

Ball Screw Part NumberRecommended Nut Brackets
TypeScrew Shaft Outer DiameterLeadPart NumberLink
TypeNo.
BSS
BSSE
2005BNFB
BNFM
BNFR
BNFA
2005SDetail here
102010SDetail here
202020SDetail here

*Aside from the part numbers shown above, there are a variety of other Nut Brackets available.

Support Information

Mounting Method Type

Installation MethodsSpeedAccuracySuggested Support Unit
Intermediate – High Speed
Applications
* Most commonly selected installation method
Intermediate Speed ApplicationsLow Speed Applications
* For short shaft length
Medium – HighHighMedium
Standard Type BRW and BUR were selected.Standard Type BRW was selected.BRWE Type was selected.

For more details, click here.

Precision Ball Screws

Standard values for variations within 300mm of effective thread length (V300) and in one revolution (V2π) for Positioning Screws (JIS B 1192-1997, C accuracy grade series).

Precision GradeC3C5
ItemV300V2πV300V2π
Standard value86188

Unit:μm

Standard values for variations within 300 mm of effective thread length (V300) for Transfer Screws (JIS B 1192-1997, Ct accuracy grade series).

Precision GradeCt7Ct10
V30050210

Unit:μm

[!]Actual Mean Travel Error (ep) for Transfer Screws (JIS B 1192-1997, Ct accuracy grade series) is obtained:

TermSymbolMeaning
Actual Mean
Travel Error
epDifference between Actual Mean Travel and Specified Travel.
VariationV300Variation for a 300 mm span arbitrarily taken from the effective thread length.
V2πVariation for an arbitrary 1 revolution (2πrad).
LengthLuScrew Effective Length.

For more details, click here.

Cautions

(1) Removing the ball nut from the screw shaft causes the ball to fall out rendering the ball screw unusable. Do not disassemble Ball Screws.
It may attract dusts and degrade assembly accuracy.
Use dedicated temporary shafts when removing Ball Nuts.

(2)Do not let a ball screw nut overrun. It may cause the balls to fall out or damage the ball recirculation parts.

(3) Do not tilt the ball screw assembly since a ball screw nut may spin off from a screw shaft due to its own weight.
Especially when using a ball screw vertically, place a fall-off prevention mechanism since a ball screw nut may spin off due to its own weight

(1) Do not remove the Nut

(2) Do not let a nut overrun

(3) Caution for free fall

 

Basic Information

Cost Efficient Standard Type Precision Flange Shape Square Flange
Screw Shaft O.D.(φ) 20 Preload No Preload Nut Type Standard Nuts
Operating Condition Standard Twisting Direction Right Nut Structure Single
Recirculating Method Tube Type Nut Size Standard

Frequently asked questions (FAQ)

質問: What is the allowable temperature range of your ballscrews?
回答: The standard allowable temperature range is 0°C to 80°C.
質問: Can I buy the nut or shaft separately?
回答: No, we do not offer the nut or shaft separately. The ball bearings inside the nut are sized to match each shaft to ensure proper clearance ranges.
質問: What grease is used for your Ball Screws?
回答: The standard grease is Alvania Grease S2 made by Showa Shell Sekiyu K.K. It is an EP 2 lithium bearing grease.
質問: What is the recommended lubrication schedule?
回答: As a rule of thumb, 100 km of linear travel is a good starting point for determining a lubrication schedule. The final schedule should be determined by the customer based on their specific appliation details (load, speed, temperature, contamination ,etc) and application experience.
質問: Do you offer food grade grease?
回答: No, we do not offer food grade grease as a standard option for ball screws.
質問: What does the dynamic load rating mean?
回答: The basic dynamic load rating (Ca) is used to calculate the service life of a ball screw in motion with its ball screw nut under an axial load. The basic dynamic load rating Ca means an axial load at which 90% of a group of identical ball screw units independently operating under the same conditions achieve a rated load of 10^6 revs (1 million revolutions) without causing flaking.
質問: Do you offer screws with right and left hand threads?
回答: We do not offer right and left hand threads on the same shaft as standard. For large volumes, it may be a custom option. Please contact engineering with application details.
質問: What is the difference between pitch and lead?
回答: The pitch is the distance between successive crests of the thread of a screw. The lead is the axial distance traveled by a screw in one turn.
質問: How does temperature increase affect the Ball Screw?
回答: An increase in the screw shaft temperature of 1°C expands the shaft by 12μm per meter. For this reason, although the lead of the Ball Screw is machined to a very high degree of precision, the thermal deformation caused by a temperature increase may reduce positioning accuracy.

Check other FAQ (6 items) Close

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

Technical Support
Tel:+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com
Mon. - Fri. 8 a.m. - 6 p.m.