(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Guides - For super heavy load, with resin retainers.

Volume Discount

Check FAQ of this product (1 item)

MISUMI

Linear guides with standard blocks or longer widths, ideal for super heavy loads. They have resin retainers without mutual contact between their bearings, which reduce noise during operation at high speeds and provide a smoother movement. Blocks and rails can be purchased separately or in an assembly.

inCAD Components

Part Number

Configured Part Number is shown.

[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.

・Materials

	Type		Block	Rail	L Dimension	[ M ]Material [ H ]Hardness
	1 block	2 blocks
Standard	SERZ	SE2RZ	SERB	SHZL	Selectable	Carbon Steel 58HRC~
	SERLZ	SE2RLZ		SHZLF	Configurable
Wide Block Through Hole	SEWZ	SE2WZ	SEWB	SHZL	Selectable
	SEWLZ	SE2WLZ		SHZLF	Configurable
Wide Block Tapped Hole	SEWTZ	SE2WTZ	SEWTB	SHZL	Selectable
	SEWTLZ	SE2WTLZ		SHZLF	Configurable

Heat Resistant Temperature: 0~50°C

Specifications

[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.

	Part Number			L	Block Dimension											Guide Rail Dimension
	Type		H		W	L₁	B	C	Sxℓ	L₂	K	T	Grease Fitting			H₁	W₁	W₂	Counterbored Hole	F	G
	1 block	2 blocks	H		W	L₁	B	C	Sxℓ	L₂	K	T	Mounting Hole	E	T₁	H₁	W₁	W₂	d₁xd₂xh	F	G
Standard	SERZ SERLZ	SE2RZ SE2RLZ	30	220~1960	44	91.8	32	50	M5x6	72	25	12	M6xP0.75	11	5	18	20	12	6x9.5x8.5	60	20
	(Block) SERB	(Rail) SHZL SHZLF	36	220~1960	48	107	35	50	M6x6	86	29	12	M6xP0.75	11	6	22	23	12.5	7x11x9	60	20
	(Block) SERB	(Rail) SHZL SHZLF	42	280~1960	60	124.6	40	60	M8x8	98	33	14	M6xP0.75	11	7	26	28	16	9x14x12	80	20
Wide Block	SEWZ SEWLZ SEWTZ SEWTLZ (Block) SEWB SEWTB	SE2WZ SE2WLZ SE2WTZ SE2WTLZ (Rail) SHZL SHZLF	30	220~1960	63	91.8	53	40	6 (M6)	72	25	10	M6xP0.75	11	5	18	20	21.5	6x9.5x8.5	60	20
			36	220~1960	70	107	57	45	7 (M8)	86	29	11	M6xP0.75	11	6	22	23	23.5	7x11x9	60	20
			42	280~1960	90	124.6	72	52	9 (M10)	98	33	11	M6xP0.75	11	7	26	28	31	9x14x12	80	20

[ ! ]Sxℓ Dimensions: Dimensions in ( ) are for Wide Block Type Tapped Hole.

Materials

	Type		Block	Rail	L Dimension	[ M ]Material [ H ]Hardness
	1 block	2 blocks
Standard	SERZ	SE2RZ	SERB	SHZL	Selectable	Carbon Steel 58HRC~
	SERLZ	SE2RLZ		SHZLF	Configurable
Wide Block Through Hole	SEWZ	SE2WZ	SEWB	SHZL	Selectable
	SEWLZ	SE2WLZ		SHZLF	Configurable
Wide Block Tapped Hole	SEWTZ	SE2WTZ	SEWTB	SHZL	Selectable
	SEWTLZ	SE2WTLZ		SHZLF	Configurable

Heat Resistant Temperature: 0~50°C

Part Number	-	L
SERZ30	-	1840

■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from derailing. For blocks >> Click here
[ ! ]For Interchangeable, Light Preload Type, rails and blocks can be interchanged.
[ ! ]Straight grooves are provided on datum planes. Be sure to match the datum lines when using.
[ ! ]Rails cannot be connected end to end.
[ ! ]Running parallelism is the value measured after the rail is mounted (it is not the value measured before the rails are fastened with screws.).
■Others
· Filled with Lithium soap based grease (Alvania Grease S2 by Showa Shell Sekiyu K.K).
· Angled Grease Fitting Type
· Grease Fitting is screw-in type, and thus, can be repositioned.
· For Operating Life Calculation >> Click here

Price list

H	L	Unit Price
		1 block			2 blocks			Rail	Block
		SERZ	SEWZ	SEWTZ	SE2RZ	SE2WZ	SE2WTZ	SHZL	SERB	SEWB	SEWTB
30	220	14,560	14,850	15,010	23,300	23,770	24,020	5,810	9,080	9,380	9,580
	280	15,800	16,120	16,280	24,550	25,050	25,300	7,060
	340	17,050	17,390	17,570	25,790	26,310	26,580	8,300
	400	18,300	18,670	18,860	27,040	27,590	27,870	9,550
	460	19,540	19,930	20,140	28,290	28,860	29,160	10,800
	520	20,790	21,210	21,430	29,530	30,130	30,440	12,040
	580	22,030	22,470	22,710	30,780	31,400	31,730	13,290
	640	23,280	23,750	24,000	32,020	32,670	33,010	14,530
	700	24,530	25,030	25,280	33,270	33,940	34,290	15,780
	760	25,770	26,290	26,560	34,520	35,220	35,580	17,030
	820	27,020	27,570	27,850	35,760	36,480	36,860	18,270
	880	28,260	28,830	29,130	37,010	37,760	38,150	19,520
	940	29,510	30,110	30,420	38,260	39,040	39,440	20,760
	1000	30,760	31,380	31,710	39,500	40,300	40,720	22,010
	1060	32,000	32,650	32,980	40,750	41,580	42,010	23,260
	1120	33,250	33,920	34,270	41,990	42,840	43,280	24,500
	1180	34,500	35,200	35,560	43,240	44,120	44,570	25,750
	1240	35,740	36,460	36,840	44,490	45,390	45,860	27,000
	1300	36,990	37,740	38,130	45,730	46,660	47,140	28,240
	1360	38,230	39,010	39,410	46,980	47,930	48,430	29,490
	1420	39,480	40,280	40,700	48,220	49,200	49,710	30,730
	1480	40,730	41,560	41,980	49,470	50,470	51,000	31,980
	1540	41,970	42,820	43,260	50,720	51,750	52,280	33,230
	1600	43,220	44,100	44,550	51,960	53,020	53,560	34,470
	1660	44,460	45,360	45,830	53,210	54,290	54,850	35,720
	1720	45,710	46,640	47,120	54,460	55,570	56,140	36,960
	1780	46,960	47,910	48,410	55,700	56,830	57,420	38,210
	1840	48,200	49,180	49,690	56,950	58,110	58,710	39,460
	1900	49,450	50,450	50,970	58,190	59,370	59,980	40,700
	1960	50,700	51,730	52,260	59,440	60,650	61,270	41,950
36	220	16,980	17,320	17,500	28,060	28,630	28,920	5,900	11,500	12,300	12,500
	280	18,240	18,610	18,800	29,320	29,910	30,220	7,160
	340	19,510	19,900	20,110	30,590	31,210	31,530	8,430
	400	20,770	21,190	21,410	31,850	32,500	32,830	9,690
	460	22,040	22,480	22,720	33,120	33,790	34,140	10,960
	520	23,300	23,770	24,020	34,380	35,080	35,440	12,220
	580	24,570	25,070	25,320	35,650	36,370	36,750	13,490
	640	25,830	26,350	26,620	36,910	37,660	38,050	14,750
	700	27,100	27,650	27,930	38,180	38,950	39,360	16,020
	760	28,360	28,930	29,230	39,440	40,240	40,650	17,280
	820	29,630	30,230	30,540	40,710	41,540	41,960	18,550
	880	30,890	31,520	31,840	41,970	42,820	43,260	19,810
	940	32,160	32,810	33,150	43,240	44,120	44,570	21,080
	1000	33,420	34,100	34,450	44,500	45,400	45,870	22,340
	1060	34,690	35,390	35,760	45,770	46,700	47,180	23,600
	1120	35,950	36,680	37,060	47,030	47,980	48,480	24,870
	1180	37,220	37,970	38,370	48,300	49,280	49,790	26,130
	1240	38,480	39,260	39,670	49,560	50,570	51,090	27,400
	1300	39,750	40,560	40,970	50,830	51,860	52,400	28,660
	1360	41,010	41,840	42,270	52,090	53,150	53,700	29,930
	1420	42,280	43,140	43,580	53,360	54,440	55,010	31,190
	1480	43,540	44,420	44,880	54,620	55,730	56,300	32,460
	1540	44,800	45,710	46,180	55,890	57,030	57,610	33,720
	1600	46,070	47,010	47,490	57,150	58,310	58,910	34,990
	1660	47,330	48,290	48,790	58,420	59,610	60,220	36,250
	1720	48,600	49,590	50,100	59,680	60,890	61,520	37,520
	1780	49,860	50,870	51,400	60,950	62,190	62,830	38,780
	1840	51,130	52,170	52,710	62,210	63,470	64,130	40,050
	1900	52,390	53,450	54,010	63,480	64,770	65,440	41,310
	1960	53,660	54,750	55,310	64,740	66,060	66,740	42,580
42	280	20,840	21,260	21,480	33,930	34,620	34,970	7,750	13,590	14,590	14,790
	360	22,560	23,020	23,250	35,650	36,370	36,750	9,470
	440	24,280	24,770	25,030	37,380	38,140	38,530	11,190
	520	26,010	26,540	26,810	39,100	39,890	40,300	12,910
	600	27,730	28,290	28,580	40,820	41,650	42,080	14,640
	680	29,450	30,050	30,360	42,540	43,400	43,850	16,360
	760	31,170	31,800	32,130	44,270	45,170	45,630	18,080
	840	32,900	33,570	33,910	45,990	46,920	47,410	19,810
	920	34,620	35,320	35,690	47,710	48,680	49,180	21,530
	1000	36,340	37,080	37,460	49,430	50,430	50,950	23,250
	1080	38,070	38,840	39,240	51,160	52,200	52,740	24,970
	1160	39,790	40,600	41,020	52,880	53,950	54,510	26,700
	1240	41,510	42,350	42,790	54,600	55,710	56,280	28,420
	1320	43,230	44,110	44,560	56,320	57,460	58,060	30,140
	1400	44,960	45,870	46,350	58,050	59,230	59,840	31,860
	1480	46,680	47,630	48,120	59,770	60,980	61,610	33,590
	1560	48,400	49,380	49,890	61,490	62,740	63,390	35,310
	1640	50,120	51,140	51,670	63,220	64,510	65,170	37,030
	1720	51,850	52,900	53,450	64,940	66,260	66,940	38,760
	1800	53,570	54,660	55,220	66,660	68,020	68,720	40,480
	1880	55,290	56,410	57,000	68,380	69,770	70,490	42,200
	1960	57,010	58,170	58,770	70,110	71,540	72,270	43,920

■L Dimension Configurable Type (1mm Increment)

H	Unit Price
	1 block
	SERLZ	SEWLZ	SEWTLZ
30	700	700	700
36	800	800	800
42	900	900	900

H	Unit Price
	2 blocks			Rails
	SE2RLZ	SE2WLZ	SE2WTLZ	SHZLF
30	700	700	700	750
36	800	800	800	850
42	900	900	900	950

■Volume Discount Rate ([ ! ]Round down to nearest one cent.) P.89

Quantity	1~4	5~9	10~19	20 or More
Discount Rate	Unit Price	Unit Price	5%	12%
Days to Ship	Standard	5 additional days		To Be Quoted

Alterations

More Information

see >> Click here

Linear Guide Clamps >> Click here
Rail Height Adjusting Blocks >> Click here, Click here
■Stopper Bolts >> Click here
■Block Stopper Plates >> Click here
■Rail Mounting Hole Caps >> Click here
■Rail Push Plates >> Click here
■Linear Locks >> Click here
■Linear Guide Lock Units >> Click here

Technical Information

Characteristics of Linear Guides

Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
End seals prevent foreign materials from entering into the blocks.
Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guide	Preload	Height H Dimension	Radial Clearance (µm)
Linear guide medium/heavy load	Normal clearance	24	-4 ~ +2
		28	-5 ~ +2
		33	-6 ~ +3
	Light preload	24,28	-4 ~ 0
		30 ~ 42	-5 ~ 0
		42*	-7 ~ 0

* marked size is for Ultra Heavy / Extra Super Heavy Load

Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Types of Greases

The following types of greases are used in MISUMI linear guides.

Grease	Linear Guide	Grease Model	Features
Standard	Miniature	Multemp Grease PS2 (Manufactured by Kyodo Yushi)	Grease with excellent low temperature and low torque properties.
	Miniature with MX lubrication unit	Tufflix MP2 (Manufactured by JX Nippon Oil & Energy)	Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
	Medium Load Heavy Load	Albania Grease S2 (Manufactured by Showa Shell Sekiyu)	It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type L	Miniature/Medium/Heavy Load	ET-100K (Manufactured by Kyodo Yushi)	It has excellent heat resistance, oxidation stability, adhesion and tackiness. It is also a low dispersion, low leakage grease.
Type G	Miniature/Medium/Heavy Load	LG2 (Manufactured by NSK Ltd.)	It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

Permissible loads

H	Basic Load Rating		Allowable Static Moment			Mass
H	C (Dynamic) kN	Co (Static) kN	MA N・m	MB N・m	MC N・m	Block kg	Guide Rails kg/m
30	21.6	44.5	360	305	298	0.65	2.6
36	32	62.5	615	515	490	0.93	3.6
42	46	91.5	1060	885	870	1.6	5.2

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Accessories

Clamping Units	Height Adjusting Blocks
Clamping Units	Economy Model	Standard Linear Guides Model

Fall Prevention /Dust Protection
Stopper Bolt	Fall Prevention Plate	Hole Cap

Rail Fastening
Linear Guide Adjustment Unit	Linear Guide Locks	Linear Guide Lock Units

Compatible Models

Category	Linear Shafts	Shaft Collars	Linear Ball Bushings	Plain & Self-Lubricating Bearings	Cable Carriers
Image

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SE2RLZ30-[221-1959/1]
SE2RLZ36-[221-1959/1]
SE2RLZ42-[281-1959/1]
SE2RZ30-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SE2RZ36-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SE2RZ42-[280,360,440,520,600,680,760,840,920,1000,1080,1160,1240,1320,1400,1480,1560,1640,1720,1800,1880,1960]
SE2WTLZ30-[221-1959/1]
SE2WTLZ36-[221-1959/1]
SE2WTLZ42-[281-1959/1]
SE2WTZ30-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SE2WTZ36-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SE2WTZ42-[280,360,440,520,600,680,760,840,920,1000,1080,1160,1240,1320,1400,1480,1560,1640,1720,1800,1880,1960]
SERLZ30-[221-1959/1]
SERLZ36-[221-1959/1]
SERLZ42-[281-1959/1]
SERZ30-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1240,1360,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SERZ36-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1780,1840,1900,1960]
SERZ42-[280,360,440,520,600,680,760,840,920,1000,1080,1160,1240,1320,1400,1480,1560,1640,1720,1800,1880,1960]
SEWTLZ30-[221-1959/1]
SEWTLZ36-[221-1959/1]
SEWTLZ42-[281-1959/1]
SEWTZ30-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1120,1180,1240,1360,1540,1600,1720,1840,1960]
SEWTZ36-[220,280,340,400,460,520,580,640,700,760,820,880,940,1000,1060,1120,1180,1240,1300,1360,1420,1480,1540,1600,1660,1720,1840,1960]
SEWTZ42-[280,360,440,520,600,680,760,840,920,1000,1080,1160,1240,1320,1400,1480,1560,1640,1720,1800,1880,1960]

Minimum order quantity	Days to Ship	RoHS	Set / Single Item	Block Type	Rail Type	Rail Width W1 (mm)	Unit Height H (mm)	No. of Blocks	Rail Length L (mm)	Nominal Part Number	Ball Arrangement	Retainer	Rolling Element	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	Lubrication Type	L Dimension Type	Block Hole Type
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	20	30	2	221 ～ 1959	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	23	36	2	221 ～ 1959	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	28	42	2	281 ～ 1959	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	20	30	2	220 ～ 1960	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	23	36	2	220 ～ 1960	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	28	42	2	280 ～ 1960	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	20	30	2	221 ～ 1959	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	23	36	2	221 ～ 1959	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	37 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	28	42	2	281 ～ 1959	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	20	30	2	220 ～ 1960	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Standard Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	23	36	2	220 ～ 1960	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Standard Type	Tapped
1 Piece(s)	37 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	28	42	2	280 ～ 1960	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Standard Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	20	30	1	221 ～ 1959	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	23	36	1	221 ～ 1959	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	28	42	1	281 ～ 1959	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Configurable Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	20	30	1	220 ～ 1960	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	23	36	1	220 ～ 1960	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Long] Long Block	Standard	28	42	1	280 ～ 1960	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Standard Type	-
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	20	30	1	221 ～ 1959	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	23	36	1	221 ～ 1959	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	37 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	28	42	1	281 ～ 1959	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Configurable Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	20	30	1	220 ～ 1960	20	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	21600	44500	360	305	298	Lithium Base Grease (Standard)	Standard Type	Tapped
1 Piece(s)	10 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	23	36	1	220 ～ 1960	25	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	32000	62500	615	515	490	Lithium Base Grease (Standard)	Standard Type	Tapped
1 Piece(s)	37 Days or more	10	Set	[Wide] Wide Block-Tapped Holes	Standard	28	42	1	280 ～ 1960	30	Medium, Heavy Load Type with Plastic Retainers	Available	Ball	46000	91500	1060	885	870	Lithium Base Grease (Standard)	Standard Type	Tapped

Product TOP

Basic Information

Material	Carbon Steel	Preload	Light Preload-Interchangeable

Configure

24 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Block Type
- Wide
  - Wide Block-Tapped Holes
- Long
  - Long Block
Clear
Rail Type
- Standard
Clear
Rail Width W1(mm)
20

23

28
Clear
Unit Height H(mm)
30

36

42
Clear
No. of Blocks
- 1
- 2
Clear
Rail Length L(mm)
220

280

340

360

400

440

460

520

580

600

640

680

700

760

820

840

880

920

940

1000

1060

1080

1120

1160

1180

1240

1300

1320

1360

1400

1420

1480

1540

1560

1600

1640

1660

1720

1780

1800

1840

1880

1900

1960
[221-1959/1mm Unit(s)]
Clear
Nominal Part Number
20

25

30
Clear
Ball Arrangement
- Medium, Heavy Load Type with Plastic Retainers
Clear
Retainer
- Available
Clear
Lubrication Type
- Lithium Base Grease (Standard)
Clear
L Dimension Type
- Configurable Type
- Standard Type
Clear
Block Hole Type
- Tapped
Clear
type
- SE2RLZ
- SE2RZ
- SE2WTLZ
- SE2WTZ
- SERB
- SERLZ
- SERZ
- SEWTB
- SEWTLZ
- SEWTZ
- SHZL
- SHZLF
Clear
Set / Single Item
- Set
- Block Only
- Rail Only
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Days or Less

12 Days or Less

37 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently asked questions (FAQ)

質問: Are the block's ball bearings retained?: 回答: Yes, all ball bearings are retained on Misumi linear guides.

Additional Products in this Category

Complementary Products

Simplified Linear Guide Locks
MISUMI Days to Ship : Same day or more
Linear Guide Adjustment Units
MISUMI Days to Ship : 8 Days or more
Linear Guide Height Adjusting Blocks - Economy Model
MISUMI Days to Ship : 12 Days or more
Linear Guide Rail Mounting Hole Caps
MISUMI Days to Ship : 8 Days or more

MISUMI Unit Example related to this product

back next

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

All Categories

Categories

Applications

Brands

How can we improve?

Linear Guides - For super heavy load, with resin retainers.

Specifications

Materials

Price list

Alterations

More Information

Technical Information

Characteristics of Linear Guides

Preload (Radial Clearance)

Types of Greases

Maintenance

Recommended lubrication intervals

Permissible loads

Support Information

Shelf Life Information

Mounting Hole Information

Installation Information

Cautions

Accessories

Compatible Models

Part Number

Basic Information

Configure

Specification/Dimensions

Block Type

Rail Type

Rail Width W1(mm)

Unit Height H(mm)

No. of Blocks

Rail Length L(mm)

Nominal Part Number

Ball Arrangement

Retainer

Lubrication Type

L Dimension Type

Block Hole Type

type

Set / Single Item

CAD

Days to Ship

Specify Alterations

Frequently asked questions (FAQ)

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)