(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Miniature Linear Guides - Resistant to high temperatures.

Check FAQ of this product (2 items)

MISUMI

Standard block stainless steel miniature linear guides. Designed with high temperature resistance parts and grease, applicable for environment up to 150°C. Blocks and rails cannot be purchased separately.

inCAD Components

(i)Caution

The appearance of this product has changed as of September 2017.
About Misumi Linear Guide Exterior Change
Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.

Part Number

Configured Part Number is shown.

Miniature Linear Guides - Heat Resistant Type:Related Image

[ ! ]For L Configurable, G dimensions differ from those shown in the table below. For details, Click here.

・Materials

[ M ]Material [ H ]Hardness	Type			L Dimension	Number of Blocks
	Light Preload
	High Grade
	Short	Standard	Long
Stainless Steel 56HRC~	SSEBST	SSEBT	SSELBT	Selectable	1
	SSE2BST	SSE2BT	SSEL2BT		2
	SSEBSLT	SSEBLT	SSELBLT	Configurable	1
	SSE2BSLT	SSE2BLT	SSEL2BLT		2

Heat Resistant Temperature: -20 ~ 150°C

Specifications

[ ! ]For L Configurable, G dimensions differ from those shown in the table below. For details, Click here.

Part Number			L	Block Type	Block Dimension								Guide Rail Dimension
Type		H			W	L₁	B	C	Sxℓ	L₂	K	Cb	H₁	W₁	W₂	Ca	Counterbored Hole	F	G
																	d₁xd₂xh
[ ! ]Dimensions in ( ) are for 2-Block Type.Short (1 block) SSEBST SSEBSLT Standard (1 block) SSEBT SSEBLT Long (1 block) SSELBT SSELBLT	(2 blocks) SSE2BST SSE2BSLT (2 blocks) SSE2BT SSE2BLT (2 blocks) SSEL2BT SSEL2BLT	8	40~130 (70)	Short	17	19.6	12	-	M2x2.5	9.6	6.5	0.3	4.7	7	5	0.3	2.4x4.2x2.3	15	5
				Standard		23.6		8		13.6
				Long		32		13		22
		10	35~275 (95)	Short	20	22.9	15	-	M3x3	11.9	7.8	0.3	5.5	9	5.5	0.3	3.5x6x3.5	20	7.5
				Standard		30		10		19
			55~275 (95)	Long		40		16		29
		13	45~470 (120)	Short	27	27	20	-	M3x3.5	13	10	0.5	7.5	12	7.5	0.5	3.5x6x4.5	25	10
				Standard		33.9		15		19.9
			70~470 (120)	Long		45.8		20		31.8
		16	70~670 (150)	Short	32	32.7	25	-	M3x4	17.7	12	0.5	9.5	15	8.5	0.5	3.5x6x4.5	40	15
				Standard		42.4		20		27.4
			110~670 (150)	Long		58.3		25		43.3

Materials

[ M ]Material [ H ]Hardness	Type			L Dimension	Number of Blocks
	Light Preload
	High Grade
	Short	Standard	Long
Stainless Steel 56HRC min.	SSEBST	SSEBT	SSELBT	Selectable	1
	SSE2BST	SSE2BT	SSEL2BT		2
	SSEBSLT	SSEBLT	SSELBLT	Configurable	1
	SSE2BSLT	SSE2BLT	SSEL2BLT		2

Heat Resistant Temperature: -20 ~ 150°C

Part Number	-	L
SSEBT10	-	195

■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes. When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane). Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws (M2x6).

■Others
· Filled with heat resistant grease (Du Pont KRYTOX GPL225).
· Stainless steel and fluoro-rubber are used for return caps and seals respectively.
· For operating life calculations please Click here, or by using our free software at, http://www.misumiusa.com/lg-bs_software/

Price list

H	L	Unit Price
		Short		Standard		Long
		SSEBST	SSE2BST	SSEBT	SSE2BT	SSELBT	SSEL2BT
8	40		-		-		-
	55		-		-		-
	70
	85
	100
	115
	130
10	35		-		-	-	-
	55		-		-		-
	75		-		-		-
	95
	115
	135
	155
	175
	195
	215
	235
	255
	275
13	45		-		-	-	-
	70		-		-		-
	95		-		-		-
	120
	145
	170
	195
	220
	245
	270
	295
	320
	345
	370
	395
	420
	445
	470
16	70		-		-	-	-
	110		-		-		-
	150
	190
	230
	270
	310
	350
	390
	430
	470
	510
	550
	590
	630
	670

■L Dimension Configurable Type (1mm Increment)

H	Unit Price
	Short		Standard		Long
	SSEBSLT	SSE2BSLT	SSEBLT	SSE2BLT	SSELBLT	SSEL2BLT
8
10
13
16

[ ! ]For calculation of L Dimension Configurable Type pricing, please use the Misumi website. http://www.misumiusa.com/lg-bs_software/

■Additional Block Price

H	Block	B3: Price Adder	B4: Price Adder
8	Short
	Standard
	Long	-	-
10	Short
	Standard
	Long
13	Short
	Standard
	Long
16	Short
	Standard
	Long

Alterations

Technical Information

Characteristics of Linear Guides

Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
End seals prevent foreign materials from entering into the blocks.
Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guide	Preload	Height H Dimension	Radial Clearance (µm)
Miniature Linear Guide	Light Preload	6 ~ 20	-3 ~ 0
Miniature Linear Guide	Slight Clearance	6 ~ 20	0 ~ 15

Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Technical Information

Types of Greases

The following types of greases are used in MISUMI linear guides.

Grease	Linear Guide	Grease Model	Features
Standard	Miniature	Multemp Grease PS2 (Manufactured by Kyodo Yushi)	Grease with excellent low temperature and low torque properties.
	Miniature with MX lubrication unit	Tufflix MP2 (Manufactured by JX Nippon Oil & Energy)	Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
	Medium Load Heavy Load	Albania Grease S2 (Manufactured by Showa Shell Sekiyu)	It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type L	Miniature/Medium/Heavy Load	ET-100K (Manufactured by Kyodo Yushi)	It has excellent heat resistance, oxidation stability, adhesion and tackiness. It is also a low dispersion, low leakage grease.
Type G	Miniature/Medium/Heavy Load	LG2 (Manufactured by NSK Ltd.)	It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

Permissible loads

H	Block type	Basic Load Rating		Allowable Static Moment			Mass
H	Block type	C (Dynamic) kN	Co (Static) kN	MA N・m	MB N・m	MC N・m	Block kg	Guide Rails kg/m
8	Short	0.79	1.27	1.9	1.6	4.6	0.008	0.19
	Standard	0.9	1.5	4.1	4.1	5.2	0.01
	Long	1.6	2.4	7.5	7.5	9	0.02
10	Short	1.16	1.68	3.1	2.6	7.9	0.015	0.31
	Standard	1.5	2.5	5.1	5.1	10.2	0.02
	Long	2.2	3.7	12.3	12.3	13	0.03
13	Short	1.63	2.38	5.2	4.4	14.8	0.025	0.61
	Standard	2.2	3.3	8.8	9.5	16.1	0.04
	Long	3.5	5.3	24.5	26.4	32.3	0.06
16	Short	3.08	4.23	12.3	10.3	32.6	0.05	1.02
	Standard	3.6	5.4	21.6	23.4	39.6	0.06
	Long	5.8	8.7	57.8	62.6	67.6	0.1

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

MISUMI linear guidesare equipped with a retainer, so that the balls will not fall out even if the block is removed from the rail. However, if the block is removed from the rail at high speed or inserted at an angle, the balls may fall out. Be careful when removing and installing the blocks.

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Linear guides have reference planes on both the rail and the block (the side with a straight groove is provided). When installing the linear guide, correctly align this reference surface with the mounting reference surface of the table and base and secure it. For more details, refer to"Installation" in "Support Information".

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Accessories

Linear Guide Clamps	Height Adjusting Blocks
Linear Guide Clamps	Height Adjusting Blocks	Stopper Bolt

Rail Fastening
Linear Guide Locks	Linear Guide Lock Units	Linear Guide Adjustment Unit

Compatible Models

Category	Linear Shafts	Shaft Collars	Linear Ball Bushings	Plain & Self-Lubricating Bearings	Cable Carriers
Image

Technical Information

Characteristics of Linear Guides

Linear guides utilize steel balls that roll on ground raceways, and the balls are recirculated using plastic return caps.
End seals prevent foreign materials from entering into the blocks.
Load ratings are the same for all four directions (radial, reverse-radial, and lateral directions). Can be used in any orientation.

Preload (Radial Clearance)

Type of guide	Preload	Height H Dimension	Radial Clearance (µm)
Miniature Linear Guide	Light Preload	6 ~ 20	-3 ~ 0
Miniature Linear Guide	Slight Clearance	6 ~ 20	0 ~ 15

Clearance and preload of MISUMI Linear Guides are controlled with minute ball size adjustments.
Increased rigidity and reduced elastic deformation will result by preloading (negative clearance).
In general, selecting some preloads would have a positive effect on the accuracy and service life of the Linear Guides.
Blocks and rails manufactured by MIUSMI guarantee their own radial clearance (preload) and accuracy as sets of blocks and rails. Be sure to use the blocks and rails in sets.

Types of Greases

The following types of greases are used in MISUMI linear guides.

Grease	Linear Guide	Grease Model	Features
Standard	Miniature	Multemp Grease PS2 (Manufactured by Kyodo Yushi)	Grease with excellent low temperature and low torque properties.
	Miniature with MX lubrication unit	Tufflix MP2 (Manufactured by JX Nippon Oil & Energy)	Reduces temperature rise in the bearing area; extends bearing life and reduces grease replenishment interval and maintenance work.
	Medium Load Heavy Load	Albania Grease S2 (Manufactured by Showa Shell Sekiyu)	It has excellent lubrication and shows excellent performance under normal and heavy load conditions.
Type L	Miniature/Medium/Heavy Load	ET-100K (Manufactured by Kyodo Yushi)	It has excellent heat resistance, oxidation stability, adhesion and tackiness. It is also a low dispersion, low leakage grease.
Type G	Miniature/Medium/Heavy Load	LG2 (Manufactured by NSK Ltd.)	It produces little dust and has excellent wear resistance and rust resistance properties.

Maintenance

The grease forms an oil film on the steel balls and on the slideways of the linear guide, reducing friction.

Loss and deterioration of the grease will greatly affect the service life of the linear guide, so it must be lubricated on time depending on the conditions of use.

MISUMI linear guides are lubricated with standard grease at the time of shipment, so they can be used as is.

Recommended lubrication intervals

Lubricate every 6 months. If linear guide is used for long distances, it is recommended to lubricate every 3 months, or if it is used more than 1000 km in a period, we recommend every 1000 km.

*The above is the distance-based lubrication interval. If the grease deteriorates or is heavily contaminated due to the operating environment, it may be necessary to shorten the lubrication interval.

By using a lubrication unit, it is possible to extend the lubrication interval considerably.

Permissible loads

H	Block type	Basic Load Rating		Allowable Static Moment			Mass
H	Block type	C (Dynamic) kN	Co (Static) kN	MA N・m	MB N・m	MC N・m	Block kg	Guide Rails kg/m
8	Short	0.79	1.27	1.9	1.6	4.6	0.008	0.19
	Standard	0.9	1.5	4.1	4.1	5.2	0.01
	Long	1.6	2.4	7.5	7.5	9	0.02
10	Short	1.16	1.68	3.1	2.6	7.9	0.015	0.31
	Standard	1.5	2.5	5.1	5.1	10.2	0.02
	Long	2.2	3.7	12.3	12.3	13	0.03
13	Short	1.63	2.38	5.2	4.4	14.8	0.025	0.61
	Standard	2.2	3.3	8.8	9.5	16.1	0.04
	Long	3.5	5.3	24.5	26.4	32.3	0.06
16	Short	3.08	4.23	12.3	10.3	32.6	0.05	1.02
	Standard	3.6	5.4	21.6	23.4	39.6	0.06
	Long	5.8	8.7	57.8	62.6	67.6	0.1

kgf = N ・ 0.101972

kgf = kilograms force, N = Newton

Support Information

Shelf Life Information

For more information about the calculation of useful life, click here.

Mounting Hole Information

For more information about mounting holes and G-value, click here.

Installation Information

For more information about the installation click here.

Cautions

If the linear guides are handled incorrectly, the quality may deteriorate. When using MISUMI linear guides, consider the following points:

Be careful when removing the blocks

Blocks and rails not sold separately

Linear guides MISUMI are only sold as a block and rail assembly. For resin retainer type only, blocks and rails can be purchased separately.

Please do not replace with another product

The radial clearance and accuracy of MISUMI linear guides are guaranteed as a block and rail assembly, so the accuracy is not guaranteed when combined with another product.

Please check the reference surface before installation.

Please do not add rails

MISUMI linear guides are shipped with chamfered edges on the end of the rail. The use of additional rails is not covered under warranty.

Secure all rail mounting holes.

The rail curvature is corrected with all mounting holes clamped. Accuracy is guaranteed under these conditions.

Accessories

Linear Guide Clamps	Height Adjusting Blocks
Linear Guide Clamps	Height Adjusting Blocks	Stopper Bolt

Rail Fastening
Linear Guide Locks	Linear Guide Lock Units	Linear Guide Adjustment Unit

Compatible Models

Category	Linear Shafts	Shaft Collars	Linear Ball Bushings	Plain & Self-Lubricating Bearings	Cable Carriers
Image

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
SSE2BLT8-[71-129/1]
SSE2BLT10-[96-274/1]
SSE2BLT13-[121-469/1]
SSE2BLT16-[151-669/1]
SSE2BSLT8-[71-129/1]
SSE2BSLT10-[96-274/1]
SSE2BSLT13-[121-469/1]
SSE2BSLT16-[151-669/1]
SSE2BST8-[70,85,100,115,130]
SSE2BST10-[95,115,135,155,175,195,215,235,255,275]
SSE2BST13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSE2BST16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSE2BT8-[70,85,100,115,130]
SSE2BT10-[95,115,135,155,175,195,215,235,255,275]
SSE2BT13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSE2BT16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBLT8-[41-129/1]
SSEBLT10-[36-274/1]
SSEBLT13-[46-469/1]
SSEBLT16-[71-669/1]
SSEBSLT8-[41-129/1]
SSEBSLT10-[36-274/1]
SSEBSLT13-[46-469/1]
SSEBSLT16-[71-669/1]
SSEBST8-[40,55,70,85,100,115,130]
SSEBST10-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBST13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBST16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEBT8-[40,55,70,85,100,115,130]
SSEBT10-[35,55,75,95,115,135,155,175,195,215,235,255,275]
SSEBT13-[45,70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEBT16-[70,110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSEL2BLT8-[71-129/1]
SSEL2BLT10-[96-274/1]
SSEL2BLT13-[121-469/1]
SSEL2BLT16-[151-669/1]
SSEL2BT8-[70,85,100,115,130]
SSEL2BT10-[95,115,135,155,175,195,215,235,255,275]
SSEL2BT13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSEL2BT16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670]
SSELBLT8-[41-129/1]
SSELBLT10-[56-274/1]
SSELBLT13-[71-469/1]
SSELBLT16-[111-669/1]
SSELBT8-[40,55,70,85,100,115,130]
SSELBT10-[55,75,95,115,135,155,175,195,215,235,255,275]
SSELBT13-[70,95,120,145,170,195,220,245,270,295,320,345,370,395,420,445,470]
SSELBT16-[110,150,190,230,270,310,350,390,430,470,510,550,590,630,670]

Minimum order quantity	Days to Ship	RoHS	Block Type	Rail Width W1 (mm)	Unit Height H (mm)	No. of Blocks	Rail Length L (mm)	Nominal Part Number	Basic Load Rating: Dynamic Load (N)	Basic Load Rating: Static Load (N)	Allowable Static Moment MA (N⋅m)	Allowable Static Moment MB (N⋅m)	Allowable Static Moment MC (N⋅m)	L Dimension Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	7	8	2	71 ～ 129	7	900	1500	4.1	4.1	5.2	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	9	10	2	96 ～ 274	9	1500	2500	5.1	5.1	10.2	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	12	13	2	121 ～ 469	12	2200	3300	8.8	9.5	16.1	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	15	16	2	151 ～ 669	15	3600	5400	21.6	23.4	39.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	7	8	2	71 ～ 129	7	780	1270	1.9	1.6	4.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	9	10	2	96 ～ 274	9	1160	1680	3.1	2.6	7.9	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	12	13	2	121 ～ 469	12	1630	2380	5.2	4.4	14.8	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	15	16	2	151 ～ 669	15	3080	4230	12.3	10.3	32.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	7	8	2	70 ～ 130	7	780	1270	1.9	1.6	4.6	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	9	10	2	95 ～ 275	9	1160	1680	3.1	2.6	7.9	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	12	13	2	120 ～ 470	12	1630	2380	5.2	4.4	14.8	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	15	16	2	150 ～ 670	15	3080	4230	12.3	10.3	32.6	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	7	8	2	70 ～ 130	7	900	1500	4.1	4.1	5.2	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	9	10	2	95 ～ 275	9	1500	2500	5.1	5.1	10.2	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	12	13	2	120 ～ 470	12	2200	3300	8.8	9.5	16.1	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	15	16	2	150 ～ 670	15	3600	5400	21.6	23.4	39.6	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	7	8	1	41 ～ 129	7	900	1500	4.1	4.1	5.2	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	9	10	1	36 ～ 274	9	1500	2500	5.1	5.1	10.2	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	12	13	1	46 ～ 469	12	2200	3300	8.8	9.5	16.1	Configurable Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	15	16	1	71 ～ 669	15	3600	5400	21.6	23.4	39.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	7	8	1	41 ～ 129	7	780	1270	1.9	1.6	4.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	9	10	1	36 ～ 274	9	1160	1680	3.1	2.6	7.9	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	12	13	1	46 ～ 469	12	1630	2380	5.2	4.4	14.8	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	15	16	1	71 ～ 669	15	3080	4230	12.3	10.3	32.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	7	8	1	40 ～ 130	7	780	1270	1.9	1.6	4.6	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	9	10	1	35 ～ 275	9	1160	1680	3.1	2.6	7.9	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	12	13	1	45 ～ 470	12	1630	2380	5.2	4.4	14.8	Standard Type
1 Piece(s)	12 Days or more	10	[Short] Short Block	15	16	1	70 ～ 670	15	3080	4230	12.3	10.3	32.6	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	7	8	1	40 ～ 130	7	900	1500	4.1	4.1	5.2	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	9	10	1	35 ～ 275	9	1500	2500	5.1	5.1	10.2	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	12	13	1	45 ～ 470	12	2200	3300	8.8	9.5	16.1	Standard Type
1 Piece(s)	12 Days or more	10	[Standard] Standard Block	15	16	1	70 ～ 670	15	3600	5400	21.6	23.4	39.6	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	7	8	2	71 ～ 129	7	1600	2400	7.5	7.5	9	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	9	10	2	96 ～ 274	9	2200	3700	12.3	12.3	13	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	12	13	2	121 ～ 469	12	3500	5300	24.5	26.4	32.3	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	15	16	2	151 ～ 669	15	5800	8700	57.8	62.6	67.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	7	8	2	70 ～ 130	7	1600	2400	7.5	7.5	9	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	9	10	2	95 ～ 275	9	1500	2500	5.1	5.1	10.2	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	12	13	2	120 ～ 470	12	3500	5300	24.5	26.4	32.3	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	15	16	2	150 ～ 670	15	5800	8700	57.8	62.6	67.6	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	7	8	1	41 ～ 129	7	1600	2400	7.5	7.5	9	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	9	10	1	56 ～ 274	9	2200	3700	12.3	12.3	13	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	12	13	1	71 ～ 469	12	3500	5300	24.5	26.4	32.3	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	15	16	1	111 ～ 669	15	5800	8700	57.8	62.6	67.6	Configurable Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	7	8	1	40 ～ 130	7	1600	2400	7.5	7.5	9	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	9	10	1	55 ～ 275	9	2200	3700	12.3	12.3	13	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	12	13	1	70 ～ 470	12	3500	5300	24.5	26.4	32.3	Standard Type
1 Piece(s)	12 Days or more	10	[Long] Long Block	15	16	1	110 ～ 670	15	5800	8700	57.8	62.6	67.6	Standard Type

Product TOP

Basic Information

Set / Single Item	Set	Rail Type	Standard	Material	Stainless Steel
Preload	Light Preload	Accuracy	High Grade	Ball Arrangement	Miniature Type
Retainer	N/A	Rolling Element	Ball	Lubrication Type	Lithium Base Grease (Standard)

Configure

48 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Block Type
- Standard
  - Standard Block
- Short
  - Short Block
- Long
  - Long Block
Clear
Rail Width W1(mm)
7

9

12

15
Clear
Unit Height H(mm)
8

10

13

16
Clear
No. of Blocks
- 1
- 2
Clear
Rail Length L(mm)
35

40

45

55

70

75

85

95

100

110

115

120

130

135

145

150

155

170

175

190

195

215

220

230

235

245

255

270

275

295

310

320

345

350

370

390

395

420

430

445

470

510

550

590

630

670
[36-669/1mm Unit(s)]
Clear
Nominal Part Number
7

9

12

15
Clear
L Dimension Type
- Configurable Type
- Standard Type
Clear
type
- SSE2BLT
- SSE2BSLT
- SSE2BST
- SSE2BT
- SSEBLT
- SSEBSLT
- SSEBST
- SSEBT
- SSEL2BLT
- SSEL2BT
- SSELBLT
- SSELBT
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

12 Days or Less
Clear

All Categories

Categories

Applications

Brands

How can we improve?

Miniature Linear Guides - Resistant to high temperatures.

(i)Caution

Specifications

Materials

Price list

Alterations

Technical Information

Characteristics of Linear Guides

Preload (Radial Clearance)

Technical Information

Types of Greases

Maintenance

Recommended lubrication intervals

Permissible loads

Support Information

Shelf Life Information

Mounting Hole Information

Installation Information

Cautions

Accessories

Compatible Models

Technical Information

Characteristics of Linear Guides

Preload (Radial Clearance)

Types of Greases

Maintenance

Recommended lubrication intervals

Permissible loads

Support Information

Shelf Life Information

Mounting Hole Information

Installation Information

Cautions

Accessories

Compatible Models

Part Number

Basic Information

Configure

Specification/Dimensions

Block Type

Rail Width W1(mm)

Unit Height H(mm)

No. of Blocks

Rail Length L(mm)

Nominal Part Number

L Dimension Type

type

CAD

Days to Ship

Specify Alterations

Frequently asked questions (FAQ)

Additional Products in this Category

Complementary Products

MISUMI Unit Example related to this product

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)