(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Miniature Linear Guides - Standard block with holes for dowel bolts.
Stainless Steel Miniature Linear Guides with standard block that adds holes for Dowel bolts, which reduce assembly time with other equipment and improve position repeatability. Selectable precision, preload and type of lubricant. Blocks and rails cannot be purchased separately.
- inCAD Components
Specifications
[ ! ]For L Dimension Configurable Type, G dimensions differ from those shown in the table below. For details, see >> Click here.
| Part Number | L | Block Dimension | Dowel Hole Dimensions | Guide Rail Dimension | ||||||||||||||||||
| Type | MX | H | W | L1 | B | C | Sxℓ | L2 | K | Cb | N | C2 | (ℓ1) | W1 | W2 | H1 | Ca | Counterbored Hole | F | G | ||
| d1xd2xh | ||||||||||||||||||||||
| SSEBN SSE2BN SSEBNL SSE2BNL | SSEBNZ SSE2BNZ SSEBNLZ SSE2BNLZ | - | 8 | 40~130 (70) | 17 | 23.6 | 12 | 8 | M2x2.5 | 13.6 | 6.5 | 0.3 | 8.5 | 8 | 2 | 7 | 5 | 4.7 | 0.3 | 2.4x4.2x2.3 | 15 | 5 |
| Blank: None -MX: Provided | 10 | 35~275 (95) | 20 | 30 | 15 | 10 | M3x3 | 19 | 7.8 | 0.3 | 10 | 10 | 2.5 | 9 | 5.5 | 5.5 | 0.3 | 3.5x6x3.5 | 20 | 7.5 | ||
| 13 | 45~470 (120) | 27 | 33.9 | 20 | 15 | M3x3.5 | 19.9 | 10 | 0.5 | 13.5 | 14 | 3 | 12 | 7.5 | 7.5 | 0.5 | 3.5x6x4.5 | 25 | 10 | |||
| 16 | 70~670 (150) | 32 | 42.4 | 25 | 20 | M3x4 | 27.4 | 12 | 0.5 | 16 | 20 | 4 | 15 | 8.5 | 9.5 | 0.5 | 3.5x6x4.5 | 40 | 15 | |||
| 20 | 100~700 (160) | 40 | 50 | 30 | 25 | M4x6 | 34.6 | 15 | 0.5 | 20 | 25 | 4 | 20 | 10 | 11 | 0.5 | 6x9.5x5.5 | 60 | 20 | |||
Materials
| [ M ] Material [ H ] Hardness | Type | MX (Lubrication Unit) | L Dimension | Number of Blocks | |
| Light Preload | Slight Clearance | ||||
| High Grade | Standard Grade | ||||
| Stainless Steel 56HRC min. | SSEBN | SSEBNZ | Blank: None -MX: Provided | Selectable | 1 |
| SSE2BN | SSE2BNZ | 2 | |||
| SSEBNL | SSEBNLZ | Configurable | 1 | ||
| SSE2BNL | SSE2BNLZ | 2 | |||
| Part Number | - | L | |
SSEBN10 SSE2BNL10L SSE2BNL10G | - - - | 275 100 100 | (L Type Greased) (G Type Greased) |
For Days to Ship, Price and Performance, >> P.531
[ ! ]Blocks and rails are not sold as separate items. This Type has guaranteed radial clearances and accuracies as sets of blocks and rails.
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws. (M2x6).
■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.
misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws. (M2x6).
■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.
misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).
(i)Caution
- The appearance of this product has changed as of September 2017.
About Misumi Linear Guide Exterior Change - Delivery times for some of our products may be delayed as national government authorities have imposed limit of capacity at our production sites.
Part Number
Configured Part Number is shown.
Specifications
| Part Number | - | L | |
| SSEBN10SSE2BNL10LSSE2BNL10G | - - - | 275 100 100 | (L Type Greased) (G Type Greased) |
For Days to Ship, Price and Performance, >> P.531
[ ! ]Blocks and rails are not sold as separate items. This Type has guaranteed radial clearances and accuracies as sets of blocks and rails.
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws. (M2x6).
■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.
misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).
■Precautions for Use
[ ! ]Blocks are equipped with retainers (wire) to prevent balls from falling out.
For proper block handling, Click here.
[ ! ]Radial clearances and accuracies are not guaranteed if the blocks and rails are interchanged from the original set combinations.
[ ! ]Straight grooves are provided on datum planes.
When using, be sure to match the datum lines..
[ ! ]Rails cannot be connected end to end.
[ ! ]The accuracy of Linear Guides is guaranteed after mounting the rail (fastening screws on the rail and pushing it onto the datum plane).
Minor bending of the rail will be adjusted after being mounted and will not affect the performance.
■Accessories
· H8 comes with cap screws. (M2x6).
■Others
· Filled with Lithium soap based grease (Multemp Grease PS2 by Kyodo Yushi Co., Ltd. ).
· For operating life calculations please Click here, or by using our free software at, http://www.
misumiusa.com/lg-bs_software/
· The MX type is greased with a lithium complex grease (TOUGHLIX GREASE MP2, made by JXTG Nippon Oil & Energy Corporation).
| Part Number | L | Block Dimension | Dowel Hole Dimensions | Guide Rail Dimension | ||||||||||||||||||
| Type | MX | H | W | L1 | B | C | Sxℓ | L2 | K | Cb | N | C2 | (ℓ1) | W1 | W2 | H1 | Ca | Counterbored Hole | F | G | ||
| d1xd2xh | ||||||||||||||||||||||
| SSEBN SSE2BN SSEBNL SSE2BNL | SSEBNZ SSE2BNZ SSEBNLZ SSE2BNLZ | - | 8 | 40~130 (70) | 17 | 23.6 | 12 | 8 | M2x2.5 | 13.6 | 6.5 | 0.3 | 8.5 | 8 | 2 | 7 | 5 | 4.7 | 0.3 | 2.4x4.2x2.3 | 15 | 5 |
| Blank: None -MX: Provided | 10 | 35~275 (95) | 20 | 30 | 15 | 10 | M3x3 | 19 | 7.8 | 0.3 | 10 | 10 | 2.5 | 9 | 5.5 | 5.5 | 0.3 | 3.5x6x3.5 | 20 | 7.5 | ||
| 13 | 45~470 (120) | 27 | 33.9 | 20 | 15 | M3x3.5 | 19.9 | 10 | 0.5 | 13.5 | 14 | 3 | 12 | 7.5 | 7.5 | 0.5 | 3.5x6x4.5 | 25 | 10 | |||
| 16 | 70~670 (150) | 32 | 42.4 | 25 | 20 | M3x4 | 27.4 | 12 | 0.5 | 16 | 20 | 4 | 15 | 8.5 | 9.5 | 0.5 | 3.5x6x4.5 | 40 | 15 | |||
| 20 | 100~700 (160) | 40 | 50 | 30 | 25 | M4x6 | 34.6 | 15 | 0.5 | 20 | 25 | 4 | 20 | 10 | 11 | 0.5 | 6x9.5x5.5 | 60 | 20 | |||
More Information
■Selectable Shortest Rail Length for B3/B4
| H | B3 (3-block) | B4 (4-block) |
| 8 | 85 | 115 |
| 10 | 115 | 155 |
| 13 | 145 | 170 |
| 16 | 190 | 230 |
| 20 | 220 | 280 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| SSE2BN8-[70,85,100,115,130] |
| SSE2BN8G-[70,85,100,115,130] |
| SSE2BN8L-[70,85,100,115,130] |
| SSE2BN10-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BN10G-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BN10L-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BN13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BN13G-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BN13L-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BN16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BN16G-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BN16L-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BN20-[160,220,280,340,400,460,520,580,640,700] |
| SSE2BN20G-[160,220,280,340,400,460,520,580,640,700] |
| SSE2BN20L-[160,220,280,340,400,460,520,580,640,700] |
| SSE2BNL8-[71-129/1] |
| SSE2BNL8G-[71-129/1] |
| SSE2BNL8L-[71-129/1] |
| SSE2BNL10-[96-274/1] |
| SSE2BNL10G-[96-274/1] |
| SSE2BNL10L-[96-274/1] |
| SSE2BNL13-[121-469/1] |
| SSE2BNL13G-[121-469/1] |
| SSE2BNL13L-[121-469/1] |
| SSE2BNL16-[151-669/1] |
| SSE2BNL16G-[151-669/1] |
| SSE2BNL16L-[151-669/1] |
| SSE2BNL20-[161-699/1] |
| SSE2BNL20G-[161-699/1] |
| SSE2BNL20L-[161-699/1] |
| SSE2BNLZ8-[71-129/1] |
| SSE2BNLZ8G-[71-129/1] |
| SSE2BNLZ8L-[71-129/1] |
| SSE2BNLZ10-[96-274/1] |
| SSE2BNLZ10G-[96-274/1] |
| SSE2BNLZ10L-[96-274/1] |
| SSE2BNLZ13-[121-469/1] |
| SSE2BNLZ13G-[121-469/1] |
| SSE2BNLZ13L-[121-469/1] |
| SSE2BNLZ16-[151-669/1] |
| SSE2BNLZ16G-[151-669/1] |
| SSE2BNLZ16L-[151-669/1] |
| SSE2BNLZ20-[161-699/1] |
| SSE2BNLZ20G-[161-699/1] |
| SSE2BNLZ20L-[161-699/1] |
| SSE2BNZ8-[70,85,100,115,130] |
| SSE2BNZ8G-[70,85,100,115,130] |
| SSE2BNZ8L-[70,85,100,115,130] |
| SSE2BNZ10-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BNZ10G-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BNZ10L-[95,115,135,155,175,195,215,235,255,275] |
| SSE2BNZ13-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BNZ13G-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BNZ13L-[120,145,170,195,220,245,270,295,320,345,370,395,420,445,470] |
| SSE2BNZ16-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BNZ16G-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BNZ16L-[150,190,230,270,310,350,390,430,470,510,550,590,630,670] |
| SSE2BNZ20-[160,220,280,340,400,460,520,580,640,700] |
| SSE2BNZ20G-[160,220,280,340,400,460,520,580,640,700] |
| SSE2BNZ20L-[160,220,280,340,400,460,520,580,640,700] |
Loading...
Example
Alterations
Basic Information
| Set / Single Item | Set | Block Type | Standard Block-Dowel Hole | Rail Type | Standard |
|---|---|---|---|---|---|
| Material | Stainless Steel | Ball Arrangement | Miniature Type | Retainer | N/A |
| Rolling Element | Ball |
Specification/Dimensions
-
Rail Width W1(mm)
-
Unit Height H(mm)
-
No. of Blocks
- 1
- 2
-
Rail Length L(mm)
- 35
- 40
- 45
- 55
- 70
- 75
- 85
- 95
- 100
- 110
- 115
- 120
- 130
- 135
- 145
- 150
- 155
- 160
- 170
- 175
- 190
- 195
- 215
- 220
- 230
- 235
- 245
- 255
- 270
- 275
- 280
- 295
- 310
- 320
- 340
- 345
- 350
- 370
- 390
- 395
- 400
- 420
- 430
- 445
- 460
- 470
- 510
- 520
- 550
- 580
- 590
- 630
- 640
- 670
- 700
[36-699/1mm Unit(s)]
-
Preload
- Light Preload
- Clearance
- Light Preload
-
Accuracy
- Standard Grade
- High Grade
-
Nominal Part Number
-
Lubrication Type
- Lithium Base Grease (Standard)
- Self-Lubricated
- Special Grease (Clean Room) - G Type
- Special Grease (Heat Resistant) - L Type
-
L Dimension Type
- Configurable Type
- Standard Type
-
type
- SSE2BN
- SSE2BNL
- SSE2BNLZ
- SSE2BNZ
- SSEBN
- SSEBN-MX
- SSEBNL
- SSEBNL-MX
- SSEBNLZ
- SSEBNLZ-MX
- SSEBNZ
- SSEBNZ-MX
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 12 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Frequently asked questions (FAQ)
- 質問: Are the block's ball bearings retained?
- 回答: Yes, all ball bearings are retained on Misumi linear guides.
- 質問: What is the seal material of you miniature linear guides?
- 回答: Nitrile Rubber (NBR).
Additional Products in this Category
- Linear Guides - Low temp black chrome plated, standard/wide Block.
- Miniature Linear Guides - Extra long block.
- Miniature Linear Guides - Wide Track, Wide Block.
- Miniature Linear Guides - Resistant to high temperatures.
- Linear Guides - For heavy load, with dust protection seals or metal scrapers.
- Miniature Linear Guides - With standard long block, wide rail.
- LM Guides - SSR Model Assembly.
- LM Guides - Rail only, model HSR.
Complementary Products
MISUMI Unit Example related to this product
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy