(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One End Stepped, Tapped or Not-Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
Part Number
Configured Part Number is shown.
Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | ||||||
One End Stepped and Tapped | One End Stepped | ||||||||
Precision Type | Standard | Standard | |||||||
D Tol. g6 | D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
VFAG | SFAG | SFUG | - | SFAC | SFCU | - | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC~ | - |
VSFAG | SSFAG | SSFUG | - | SSFAC | SSFCU | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
VPFAG | PSFAG | PSFUG | - | PSFAC | PSFCU | - | 52100 Bearing Steel Equivalent | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
VPSFAG | PSSFAG | PSSFUG | - | PSSFAC | PSSFCU | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
VRAG | RSFAG | - | - | RSFAC | - | - | 52100 Bearing Steel Equivalent | Low Temp. Black Chrome Plating | |
VSRAG | - | - | - | - | - | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
- | - | - | PSFGG | - | - | PSCGC | 1045 Carbon Steel | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | - | PSSFGG | - | - | PSSCGC | 304 Stainless Steel |
Part Number | - | L | - | F | - | P | - | M |
VFAG20 SFAG20 SFAC20 | - - - | 400 400 500 | - - - | F25 F25 F25 | - - - | P16 P16 P16 | - - | M10 M10 |
D Tol. | |||
D | g6 | h5 | f8 |
8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
10 | |||
12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
13 | |||
15 | |||
16 | |||
18 | |||
20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
25 | |||
30 | |||
35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
40 | |||
50 |
Part Number | 1mm Increment | M (Coarse Thread) | (Y) Max. | R | C | ||||||||||||
Type | D | L | F | P | |||||||||||||
Precision Type One End Stepped and Tapped (D Tolerance g6) VFAG VSFAG VPFAG VPSFAG VRAG VSRAG | 8 | 25~298 | 2≤F≤Px4 | 6 | 3 | 300 | 0.3 or Less | 0.5 or Less | |||||||||
10 | 25~348 | 6~8 | 3 | 4 | 5 | 350 | |||||||||||
12 | 25~348 | 6~10 | 3 | 4 | 5 | 6 | 350 | ||||||||||
13 | 25~348 | 6~11 | 3 | 4 | 5 | 6 | 8 | 350 | |||||||||
15 | 25~348 | 6~13 | 3 | 4 | 5 | 6 | 8 | 10 | 350 | ||||||||
16 | 25~348 | 6~14 | 3 | 4 | 5 | 6 | 8 | 10 | 350 | ||||||||
18 | 25~348 | 8~16 | 4 | 5 | 6 | 8 | 10 | 12 | 350 | ||||||||
20 | 25~448 | 8~17 | 4 | 5 | 6 | 8 | 10 | 12 | 450 | 1.0 or Less | |||||||
25 | 25~448 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 450 | |||||||
30 | 25~448 | 9~27 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 450 |
Part Number | 1mm Increment | M (Coarse Thread) | (Y)Max. | R | C | ||||||||||||||||
Type | D | L | F | P | |||||||||||||||||
Standard Type | 8 | 25~ 998 | 2≤F≤Px4 | 6 | 3 | 800 | 0.3 or Less | 0.5 or Less | |||||||||||||
One End Stepped and Tapped (D Tolerance g6) SFAG SSFAG PSFAG PSSFAG RSFAG (D≤30, L≤500) (D Tolerance f8) PSFGG PSSFGG | (D Tolerance h5) SFUG SSFUG PSFUG PSSFUG | One End Stepped (D Tolerance g6) SFAC SSFAC PSFAC PSSFAC RSFAC (D≤30, L≤500) (D Tolerance f8) PSCGC PSSCGC | (D Tolerance h5) SFCU SSFCU PSFCU PSSFCU | 10 | 25~ 998 | 6~ 8 | 3 | 4 | 5 | 800 | |||||||||||
12 | 25~ 1198 | 6~10 | 3 | 4 | 5 | 6 | 1000 | ||||||||||||||
13 | 25~ 1198 | 6~11 | 3 | 4 | 5 | 6 | 8 | 1000 | |||||||||||||
15 | 25~ 1198 | 6~13 | 3 | 4 | 5 | 6 | 8 | 10 | 1000 | ||||||||||||
16 | 25~1198 | 6~14 | 3 | 4 | 5 | 6 | 8 | 10 | 1200 | ||||||||||||
18 | 25~1198 | 8~16 | 4 | 5 | 6 | 8 | 10 | 12 | 1200 | ||||||||||||
20 | 25~1198 | 8~17 | 4 | 5 | 6 | 8 | 10 | 12 | 1200 | 1.0 or Less | |||||||||||
25 | 25~1198 | 8~22 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 1200 | |||||||||||
30 | 25~1498 | 9~27 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 1500 | ||||||||||
35 | 25~1498 | 9~32 | 5 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 1500 | 0.5 or Less | |||||||||
40 | 25~1498 | 11~37 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1500 | ||||||||||
50 | 25~1498 | 11~47 | 6 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 1500 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
SSFAG16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10] |
SSFAG18-[25-1198/1]-F[2-56/1]-P[8-16/1]-M[4,5,6,8,10,12] |
SSFAG18-[25-1198/1]-F[2-56/1]-P[8-16/1]-MD[6,8,10,12] |
SSFAG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12] |
SSFAG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12] |
SSFAG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16] |
SSFAG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16] |
SSFAG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24] |
SSFAG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20] |
SSFAG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24] |
SSFAG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30] |
SSFAG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30] |
SSFCU8-[25-798/1]-F[2-24/1]-P6 |
SSFCU10-[25-798/1]-F[2-32/1]-P[6,7,8] |
SSFCU12-[25-998/1]-F[2-40/1]-P[6-10/1] |
SSFCU13-[25-998/1]-F[2-52/1]-P[6-11/1] |
SSFCU15-[25-998/1]-F[2-52/1]-P[6-13/1] |
SSFCU16-[25-1198/1]-F[2-56/1]-P[6-14/1] |
SSFCU18-[25-1198/1]-F[2-64/1]-P[8-16/1] |
SSFCU20-[25-1198/1]-F[2-68/1]-P[8-17/1] |
SSFCU25-[25-1198/1]-F[2-88/1]-P[8-22/1] |
SSFCU30-[25-1498/1]-F[2-108/1]-P[9-27/1] |
SSFCU35-[25-1498/1]-F[2-128/1]-P[9-32/1] |
SSFCU40-[25-1498/1]-F[2-148/1]-P[11-37/1] |
SSFCU50-[25-1498/1]-F[2-188/1]-P[11-47/1] |
SSFUG8-[25-798/1]-F[2-24/1]-P6-M3 |
SSFUG10-[25-798/1]-F[2-32/1]-P[6,7,8]-M[3,4,5] |
SSFUG12-[25-998/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6] |
SSFUG12-[25-998/1]-F[2-40/1]-P[6-10/1]-MD6 |
SSFUG13-[25-998/1]-F[2-52/1]-P[6-11/1]-M[3,4,5,6,8] |
SSFUG13-[25-998/1]-F[2-52/1]-P[6-11/1]-MD[6,8] |
SSFUG15-[25-998/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10] |
SSFUG15-[25-998/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10] |
SSFUG16-[25-1198/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10] |
SSFUG16-[25-1198/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10] |
SSFUG18-[25-1198/1]-F[2-64/1]-P[8-16/1]-M[4,5,6,8,10,12] |
SSFUG18-[25-1198/1]-F[2-64/1]-P[8-16/1]-MD[6,8,10,12] |
SSFUG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12] |
SSFUG20-[25-1198/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12] |
SSFUG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16] |
SSFUG25-[25-1198/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16] |
SSFUG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24] |
SSFUG30-[25-1498/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20] |
SSFUG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24] |
SSFUG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30] |
SSFUG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30] |
VFAG8-[25-298/1]-F[2-24/1]-P6-M3 |
VFAG10-[25-348/1]-F[2-48/1]-P[6,7,8]-M[3,4,5] |
VFAG12-[25-348/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6] |
VFAG13-[25-348/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8] |
VFAG13-[25-348/1]-F[2-44/1]-P[6-11/1]-MD[6,8] |
VFAG15-[25-348/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10] |
VFAG15-[25-348/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10] |
VFAG16-[25-348/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10] |
VFAG16-[25-348/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10] |
VFAG18-[25-348/1]-F[2-64/1]-P[8-16/1]-M[4,5,6,8,10,12] |
VFAG18-[25-348/1]-F[2-64/1]-P[8-16/1]-MD[6,8,10,12] |
VFAG20-[25-448/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12] |
VFAG20-[25-448/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12] |
VFAG25-[25-448/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16] |
VFAG25-[25-448/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16] |
VFAG30-[25-448/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24] |
VFAG30-[25-448/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20] |
VSFAG8-[25-298/1]-F[2-24/1]-P6-M3 |
VSFAG10-[25-348/1]-F[2-48/1]-P[6,7,8]-M[3,4,5] |
VSFAG12-[25-348/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6] |
VSFAG13-[25-348/1]-F[2-44/1]-P[6-11/1]-M[3,4,5,6,8] |
VSFAG13-[25-348/1]-F[2-44/1]-P[6-11/1]-MD[6,8] |
VSFAG15-[25-348/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10] |
VSFAG15-[25-348/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10] |
VSFAG16-[25-348/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10] |
VSFAG16-[25-348/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10] |
VSFAG18-[25-348/1]-F[2-64/1]-P[8-16/1]-M[4,5,6,8,10,12] |
VSFAG18-[25-348/1]-F[2-64/1]-P[8-16/1]-MD[6,8,10,12] |
VSFAG20-[25-448/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12] |
VSFAG25-[25-448/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16] |
VSFAG25-[25-448/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16] |
VSFAG30-[25-448/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24] |
Loading...
Basic Shape | One End Stepped | End Shape (Right) | No Machining |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy