(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One End Threaded, One End Tapped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 5mm - 50mm
[Length range]25mm - 1498mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
Part Number
Configured Part Number is shown.
Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |||||
With Wrench Flats | With Cross-Drilled Hole | |||||||
Precision Type | Standard | |||||||
D Tol. g6 | D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. f8 | |||
VFAZ | SFAZ | SFZU | - | SFZH | - | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC~ | - |
VSFAZ | SSFAZ | SSFZU | - | SSFZH | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
VPFAZ | PSFAZ | PSFZU | - | PSFZH | - | 52100 Bearing Steel Equivalent | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
VPSFAZ | PSSFAZ | PSSFZU | - | PSSFZH | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
VRAZ | RSFAZ | - | - | RSFZH | - | 52100 Bearing Steel Equivalent | Low Temp. Black Chrome Plating | |
- | - | - | PSGGZ | - | PSGZH | 1045 Carbon Steel | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
- | - | - | PSSGGZ | - | 304 Stainless Steel |
Part Number | - | L | - | F | - | B | - | P | - | N | - | SC | - | H |
VFAZ16 SFAZ20 SSFZH20 | - - - | 200 277 277 | - - - | F20 F25 F25 | - - - | B12 B12 B12 | - - - | P10 P10 P10 | - - - | N8 N12 N12 | - - | SC10 SC10 | - | H10 |
D Tol. | |||
D | g6 | h5 | f8 |
6 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 |
8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
10 | |||
12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
13 | |||
15 | |||
16 | |||
18 | |||
20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
25 | |||
30 | |||
35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
40 | |||
50 |
Part Number | 1mm Increment | P (Coarse Thread) | M (Coarse Thread) | Wrench Flats Dimensions | (Y)Max. | R | C | ||||||||||||||||||||||
Type | D | L | F | B | SC | W | ℓ1 | ||||||||||||||||||||||
Precision Type (With Wrench Flats) (D Tolerance g6) VFAZ VSFAZ VPFAZ VPSFAZ VRAZ | 6 | 25~296 | 2≤F≤Px5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 B≥Pitchx3 | 3 | 4 | 3 | SC=1mm Increment SC+ℓ1≤L SC≥0 Details of Wrench Flats P.98 | 5 | 8 | 300 | 0.3 or Less | 0.5 or Less | ||||||||||||||||
8 | 25~296 | 3 | 4 | 5 | 6 | 3 | 4 | 5 | 7 | 300 | |||||||||||||||||||
10 | 25~345 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 6 | 8 | 350 | ||||||||||||||||||
12 | 25~345 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 10 | 10 | 350 | |||||||||||||||||
13 | 25~345 | 5 | 6 | 8 | 10 | 4 | 5 | 6 | 8 | 11 | 350 | ||||||||||||||||||
15 | 25~345 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 13 | 350 | ||||||||||||||||
16 | 25~345 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 14 | 350 | ||||||||||||||||
18 | 25~345 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 350 | ||||||||||||||
20 | 25~445 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 450 | 1.0 or Less | ||||||||||||||
25 | 25~445 | 8 | 10 | 12 | 16 | 20 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 450 | ||||||||||||||
30 | 25~445 | 8 | 10 | 12 | 16 | 20 | 24 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | 450 |
Coarse Thread Dimension | |
M | pitch |
3 | 0.5 |
4 | 0.7 |
5 | 0.8 |
6 | 1.0 |
8 | 1.25 |
10 | 1.5 |
12 | 1.75 |
16 | 2.0 |
20 | 2.5 |
24 | 3.0 |
30 | 3.5 |
Part Number | 1mm Increment | P (Coarse Thread) | M (Coarse Thread) | Wrench Flats Dimensions | Cross-Drilled Hole Dimensions | (Y)Max. | R | C | ||||||||||||||||||||||||||||
Type | D | L | F | B | SC | W | ℓ1 | H | d | |||||||||||||||||||||||||||
Standard Type | (With Cross-Drilled Hole) 8≤D≤30, L≤500 (D Tolerance g6)SFZH SSFZH PSFZH PSSFZH RSFZH (D Tolerance f8)PSGZH | 6 | 25~ 798 | 2≤F≤Px5 | (When P≤6) B≤F-2 (When P=8, 10) B≤F-3 (When P≥12) B≤F-5 (W/o Threads) B=0 [ ! ]B≥Pitchx3 | 3 | 4 | 5 | 6 | 3 | SC=1mm Increment [ ! ]SC+ℓ1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >>Click here | 5 | 8 | H=1mm Increment [ ! ]L≥H+d/2+6 +Nx2.5 [ ! ]H≥d/2+2 | - | 600 | 0.3 or Less | 0.5 or Less | ||||||||||||||||||
(With Wrench Flats) (D Tolerance g6) SFAZ SSFAZ PSFAZ PSSFAZ RSFAZ (D≤30, L≤500) (D Tolerance f8)PSGGZ PSSGGZ | (D Tolerance h5) SFZU SSFZU PSFZU PSSFZU | 8 | 25~ 998 | 3 | 4 | 5 | 6 | 8 | 3 | 4 | 5 | 7 | 3 | 800 | ||||||||||||||||||||||
10 | 25~ 998 | 4 | 5 | 6 | 8 | 10 | 3 | 4 | 5 | 6 | 8 | 800 | ||||||||||||||||||||||||
12 | 25~ 1198 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 10 | 1000 | |||||||||||||||||||||||
13 | 25~ 1198 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 11 | 4 | 1000 | |||||||||||||||||||||||
15 | 25~ 1198 | 5 | 6 | 8 | 10 | 12 | 4 | 5 | 6 | 8 | 10 | 13 | 1000 | |||||||||||||||||||||||
16 | 25~1198 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 14 | 1200 | ||||||||||||||||||||||
18 | 25~1198 | 5 | 6 | 8 | 10 | 12 | 16 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 6 | 1200 | ||||||||||||||||||||
20 | 25~1198 | 6 | 8 | 10 | 12 | 16 | 20 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 1200 | 1.0 or Less | ||||||||||||||||||||
25 | 25~1198 | 8 | 10 | 12 | 16 | 20 | 24 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 7 | 1200 | |||||||||||||||||||
30 | 25~1498 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | 1500 | |||||||||||||||||||
35 | 25~1498 | 10 | 12 | 16 | 20 | 24 | 30 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | - | 1500 | 0.5 or Less | |||||||||||||||||||
40 | 40~1498 | 12 | 16 | 20 | 24 | 30 | 10 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | 1500 | |||||||||||||||||||||
50 | 50~1498 | 16 | 20 | 24 | 30 | 12 | 16 | 20 | 24 | 30 | 41 | 1500 |
CAD Data download and 3D preview are not available because the part number has not yet been determined.
Part Number |
---|
SFZU40-[40-1498/1]-F[2-150/1]-B[0-145/1]-PMC[12,15,17,20,25,30]-N[10,12,16,20,24,30]-SC[0-1478/1] |
SFZU40-[40-1498/1]-F[2-150/1]-B[0-145/1]-PMC[12,15,17,20,25,30]-NSC[10,12,14,18]-SC[0-1478/1] |
SFZU40-[40-1498/1]-F[2-150/1]-B[0-145/1]-PMS[12,14,18]-N[10,12,16,20,24,30]-SC[0-1478/1] |
SFZU40-[40-1498/1]-F[2-150/1]-B[0-145/1]-PMS[12,14,18]-NSC[10,12,14,18]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-P[16,20,24,30]-N[12,16,20,24,30]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-P[16,20,24,30]-NSC[12,14,18]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMC[15,17,20,25,30]-N[12,16,20,24,30]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMC[15,17,20,25,30]-NSC[12,14,18]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMS[14,18]-N[12,16,20,24,30]-SC[0-1478/1] |
SFZU50-[50-1498/1]-F[2-150/1]-B[0-145/1]-PMS[14,18]-NSC[12,14,18]-SC[0-1478/1] |
SSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-P[3,4,5,6]-N3-SC[0-590/1] |
SSFAZ6-[25-598/1]-F[2-30/1]-B[0-28/1]-PMC[3,4,5,6]-N3-SC[0-590/1] |
SSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-P[3,4,5,6,8]-N[3,4,5]-SC[0-790/1] |
SSFAZ8-[25-798/1]-F[2-40/1]-B[0-38/1]-PMC[3,4,5,6,8]-N[3,4,5]-SC[0-790/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-P[4,5,6,8,10]-ND6-SC[0-780/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-N[3,4,5,6]-SC[0-780/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMC[4,5,6,8,10]-ND6-SC[0-780/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-N[3,4,5,6]-SC[0-780/1] |
SSFAZ10-[25-798/1]-F[2-50/1]-B[0-48/1]-PMS10-ND6-SC[0-780/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8]-SC[0-988/1] |
SSFAZ12-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC8-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC8-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-N[4,5,6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-ND[6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12]-NSC8-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-N[4,5,6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-ND[6,8]-SC[0-988/1] |
SSFAZ13-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS10-NSC8-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-N[4,5,6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-ND[6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-P[5,6,8,10,12]-NSC[8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-N[4,5,6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-ND[6,8,10]-SC[0-988/1] |
SSFAZ15-[25-998/1]-F[2-60/1]-B[0-58/1]-PMS[10,12]-NSC[8,10]-SC[0-988/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-ND[6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-N[4,5,6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-ND[6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15]-NSC[8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-N[4,5,6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-ND[6,8,10]-SC[0-1188/1] |
SSFAZ16-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14]-NSC[8,10]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-P[5,6,8,10,12,16]-NSC[8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMC[5,6,8,10,12,15,17]-NSC[8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ18-[25-1198/1]-F[2-80/1]-B[0-78/1]-PMS[10,12,14,18]-NSC[8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-P[6,8,10,12,16,20]-NSC[8,10,12,14]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMC[6,8,10,12,15,17,20]-NSC[8,10,12,14]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-ND[6,8,10,12]-SC[0-1188/1] |
SSFAZ20-[25-1198/1]-F[2-100/1]-B[0-98/1]-PMS[10,12,14,18]-NSC[8,10,12,14]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-N[4,5,6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-ND[6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-P[8,10,12,16,20,24]-NSC[8,10,12,14,18]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-N[4,5,6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMC[8,10,12,15,17,20,25]-NSC[8,10,12,14,18]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-N[4,5,6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-ND[6,8,10,12,16]-SC[0-1188/1] |
SSFAZ25-[25-1198/1]-F[2-120/1]-B[0-117/1]-PMS[10,12,14,18]-NSC[8,10,12,14,18]-SC[0-1188/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-N[6,8,10,12,16,20]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-ND[6,8,10,12,16,20]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-P[8,10,12,16,20,24,30]-NSC[8,10,12,14,18]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-N[6,8,10,12,16,20]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-ND[6,8,10,12,16,20]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMC[8,10,12,15,17,20,25,30]-NSC[8,10,12,14,18]-SC[0-1483/1] |
SSFAZ30-[25-1498/1]-F[2-150/1]-B[0-147/1]-PMS[10,12,14,18]-N[6,8,10,12,16,20]-SC[0-1483/1] |
Loading...
Basic Shape | One End Stepped | End Shape (Left) | Threaded | End Shape (Right) | Tapped |
---|
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy