(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Precision Linear Shafts - Both ends threaded, undercut, wrench flat / cross. (Part Numbers)

Lead Time Reduction

MISUMI

Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
Both Ends Thread Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 8mm - 50mm
[Length range]25mm - 1490mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.

METRIC
inCAD Components

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Precision Linear Shafts - Both Ends Threaded with Undercut and Wrench Flat - Precision Type:Related Image

・Materials

Type						[ M ]Material	[ H ]Hardness	[ S ]Surface Treatment
With Wrench Flats				With Cross-Drilled Hole
Precision Type	Standard
D Tol. g6	D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. f8
VAFU	SAFU	SFFU	-	SFHAM	-	52100 Bearing Steel Equivalent	Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC ~	-
VSAFU	SSAFU	SSFFU	-	SSHAM	-	SUS440C(13Cr) Stainless Steel Equivalent		-
VPAFU	PSAFU	PSFFU	-	PSHAM	-	52100 Bearing Steel Equivalent		Hard Chrome Plating Plating Hardness: HV750~ Plating Thickness: 5µ or More
VPSAFU	PSSAFU	PSSFFU	-	PSSHAM	-	SUS440C(13Cr) Stainless Steel Equivalent
VRFU	RSAFU	-	-	RSHAM	-	52100 Bearing Steel Equivalent		Low Temp. Black Chrome Plating
-	-	-	PSAGU	-	PSHGM	1045 Carbon Steel	-	Hard Chrome Plating Plating Hardness: HV750~ Plating Thickness: 10µ or More
-	-	-	PSSAGU	-	-	304 Stainless Steel	-

Specifications

Part Number	-	L	-	F	-	M	-	T	-	N	-	SC	-	H
VAFU20 SAFU15 SFHAM15	- - -	200 300 300	- - -	F30 F18 F18	- - -	M10 M6 M6	- - -	T20 T17 T17	- - -	N10 N12 N12	- -	SC8 SC8	-	H8

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Part Number		1mm Increment		Selection							Wrench Flats Dimensions			(Y)Max.	C
Type	D	L	F, T	M, N (Coarse)							SC	W	ℓ₁	(Y)Max.	C
Precision Type (With Wrench Flats) (D Tolerance g6) VAFU VSAFU VPAFU VPSAFU VRFU	8	25~290	5≤F≤Mx3 5≤T≤Nx3 F-(g)≥Pitchx3 T-(g)≥Pitchx3	6							SC=1mm Increment SC+ℓ₁≤L SC≥0 Details of Wrench Flats P.98	7	8	300	0.5 or Less
	10	25~340		6	8							8	8	350
	12	25~340		6	8	10						10	10	350
	13	25~340		6	8	10						11		350
	15	25~340		6	8	10	12					13		350
	16	25~340		6	8	10	12					14		350
	18	25~340		6	8	10	12	16				16		350
	20	25~440		6	8	10	12	16				17		450	1.0 or Less
	25	25~440			8	10	12	16	20			22		450
	30	25~440			8	10	12	16	20	24		27	15	450

Shaft ends may have centering holes.

Coarse Thread Undercut Dimension
M N	Pitch	MC NC	(g)
6	1.0	4.4 (4.2)	2
8	1.25	6.0	3
10	1.5	7.7	3
12	1.75	9.4	4
16	2.0	13.0	4
20	2.5	16.4	5
24	3.0	19.6
30	3.5	25.0

MC dimensions in ( ) are for Precision Type M6.

Part Number				1mm Increment		Selection								Wrench Flats Dimensions			Cross-Drilled Hole Dimensions		(Y)Max.	C
Type			D	L	F, T	M, N (Coarse)								SC	W	ℓ₁	H	d	(Y)Max.	C
Standard Type			8	25~ 990	5≤F≤Mx3 5≤T≤Nx3 [ ! ]F-(g)≥Pitchx3 [ ! ]T-(g)≥Pitchx3	6								SC=1mm Increment [ ! ]SC+ℓ₁≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats >> Click here	7	8	H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥d/2+2	3	800	0.5 or Less
(With Wrench Flats) (D Tolerance g6)SAFU SSAFU PSAFU PSSAFU RSAFU (D Tolerance f8)PSAGU PSSAGU (D≤30, L≤500, Ymax≤800)	(D Tolerance h5)SFFU SSFFU PSFFU PSSFFU	(With Cross-Drilled Hole) D≤30, L≤500 (D Tolerance g6)SFHAM SSHAM PSHAM PSSHAM RSHAM (D Tolerance f8)PSHGM	10	25~ 990		6	8								8	8			800
			12	25~ 1190		6	8	10							10	10			1000
			13	25~ 1190		6	8	10	12						11			4	1000
			15	25~ 1190		6	8	10	12						13				1000
			16	25~1190		6	8	10	12						14				1200
			18	25~1190		6	8	10	12	16					16			6	1200
			20	25~1190		6	8	10	12	16					17			6	1200	1.0 or Less
			25	25~1190			8	10	12	16	20	24			22			7	1200
			30	25~1490			8	10	12	16	20	24			27	15		7	1500
			35	25~1490				10	12	16	20	24	30		30	15		-	1500
			40	25~1490					12	16	20	24	30		36	20			1500
			50	25~1490						16	20	24	30		41	20			1500

Alterations

Alteration Details >> Click here
For details, see Shaft Alteration Overview>> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
SFFU50-[25-1490/1]-F[5-90/1]-MMC[15,17,20,25,30]-T[5-90/1]-NMC[15,17,20,25,30]-SC[0-1470/1]
SFFU50-[25-1490/1]-F[5-90/1]-MMC[15,17,20,25,30]-T[5-90/1]-NMS[14,18]-SC[0-1470/1]
SFFU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-N[16,20,24,30]-SC[0-1470/1]
SFFU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-NMC[15,17,20,25,30]-SC[0-1470/1]
SFFU50-[25-1490/1]-F[5-90/1]-MMS[14,18]-T[5-90/1]-NMS[14,18]-SC[0-1470/1]
SFHAM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-N6-H[0-496/1]
SFHAM8-[25-500/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-H[0-496/1]
SFHAM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-H[0-496/1]
SFHAM8-[25-500/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-H[0-496/1]
SFHAM10-[25-500/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-H[0-496/1]
SFHAM10-[25-500/1]-F[5-24/1]-M[6,8]-T[5-24/1]-NMC[6,8]-H[0-496/1]
SFHAM10-[25-500/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-N[6,8]-H[0-496/1]
SFHAM10-[25-500/1]-F[5-24/1]-MMC[6,8]-T[5-24/1]-NMC[6,8]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-M[6,10,500]-T[5-500/1]-N[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-M[6,10,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-M[6,10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-N[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM12-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMC[6,10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,10,500]-H[0-496/1]
SFHAM13-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM15-[25-500/1]-F[5-500/1]-MMS[10,500]-T[5-500/1]-NMS[10,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-M[6,10,12,500]-T[5-500/1]-NMS[10,14,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMC[6,10,12,500]-T[5-500/1]-NMS[10,14,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-N[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMC[6,10,12,500]-H[0-496/1]
SFHAM16-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMS[10,14,500]-H[0-496/1]
SFHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-M[6,8,10,12,16]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,500]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-N[6,8,10,12,16]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMC[6,10,12,15,500]-H[0-495/1]
SFHAM18-[25-500/1]-F[5-500/1]-MMS[10,14,500]-T[5-500/1]-NMS[10,14,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-M[6,10,12,16,500]-T[5-500/1]-N[6,10,12,16,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-M[6,10,12,16,500]-T[5-500/1]-NMC[6,10,12,15,17,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-M[6,10,12,16,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,17,500]-T[5-500/1]-N[6,10,12,16,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,17,500]-T[5-500/1]-NMC[6,10,12,15,17,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMC[6,10,12,15,17,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMS[10,14,18,500]-T[5-500/1]-N[6,10,12,16,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMC[6,10,12,15,17,500]-H[0-495/1]
SFHAM20-[25-500/1]-F[5-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-495/1]
SFHAM25-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-NMC[8,12,15,17,20,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,500]-T[5-500/1]-NMC[8,12,15,17,20,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMC[8,12,15,17,20,500]-H[0-494/1]
SFHAM25-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-NMC[8,12,15,17,20,25,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-M[8,12,16,20,24,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,25,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,25,500]-T[5-500/1]-NMC[8,12,15,17,20,25,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMC[8,12,15,17,20,25,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-N[8,12,16,20,24,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMC[8,12,15,17,20,25,500]-H[0-494/1]
SFHAM30-[25-500/1]-F[7-500/1]-MMS[10,14,18,500]-T[5-500/1]-NMS[10,14,18,500]-H[0-494/1]
SSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-N6-SC[0-782/1]
SSAFU8-[25-790/1]-F[5-18/1]-M6-T[5-18/1]-NMC6-SC[0-782/1]
SSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-N6-SC[0-782/1]
SSAFU8-[25-790/1]-F[5-18/1]-MMC6-T[5-18/1]-NMC6-SC[0-782/1]
SSAFU10-[25-790/1]-F[5-24/1]-M[6,8]-T[5-24/1]-N[6,8]-SC[0-782/1]

Minimum order quantity	Days to Ship	RoHS	Shaft Dia. D (mm)	Shaft End Perpendicularity	Material	Heat Treated	Surface Finish	Shaft Fits Tolerance	Length L (mm)	Tightening Tool Type	Change to Fine Threads [MMC] (mm)	Change to Fine Threads [MMS] (mm)	Change to Fine Threads [NMC] (mm)	Change to Fine Threads [NMS] (mm)	Coarse Thread [M] (mm)	F (mm)	H (mm)	Coarse Tapped [N] Depth=Nx2 (mm)	SC (mm)	T (mm)
1 Piece(s)	10 Days or more	10	50	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	h5	25 ～ 1490	With Wrench Flats	15 ～ 30	-	15 ～ 30	-	-	5 ～ 90	-	-	0 ～ 1470	5 ～ 90
1 Piece(s)	10 Days or more	10	50	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	h5	25 ～ 1490	With Wrench Flats	15 ～ 30	-	-	14 ～ 18	-	5 ～ 90	-	-	0 ～ 1470	5 ～ 90
1 Piece(s)	10 Days or more	10	50	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	h5	25 ～ 1490	With Wrench Flats	-	14 ～ 18	-	-	-	5 ～ 90	-	16 ～ 30	0 ～ 1470	5 ～ 90
1 Piece(s)	10 Days or more	10	50	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	h5	25 ～ 1490	With Wrench Flats	-	14 ～ 18	15 ～ 30	-	-	5 ～ 90	-	-	0 ～ 1470	5 ～ 90
1 Piece(s)	10 Days or more	10	50	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	h5	25 ～ 1490	With Wrench Flats	-	14 ～ 18	-	14 ～ 18	-	5 ～ 90	-	-	0 ～ 1470	5 ～ 90
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6	5 ～ 18	0 ～ 496	6	-	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6	-	6	5 ～ 18	0 ～ 496	-	-	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6	-	-	-	-	5 ～ 18	0 ～ 496	6	-	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6	-	6	-	-	5 ～ 18	0 ～ 496	-	-	5 ～ 18
1 Piece(s)	10 Days or more	10	10	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 8	5 ～ 24	0 ～ 496	6 ～ 8	-	5 ～ 24
1 Piece(s)	10 Days or more	10	10	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 8	-	6 ～ 8	5 ～ 24	0 ～ 496	-	-	5 ～ 24
1 Piece(s)	10 Days or more	10	10	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 8	-	-	-	-	5 ～ 24	0 ～ 496	6 ～ 8	-	5 ～ 24
1 Piece(s)	10 Days or more	10	10	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 8	-	6 ～ 8	-	-	5 ～ 24	0 ～ 496	-	-	5 ～ 24
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 500	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	12	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 500	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	13	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 500	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	15	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 500	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 500	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 496	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	16	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 496	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 16	5 ～ 500	0 ～ 495	6 ～ 16	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 16	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 16	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 495	6 ～ 16	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 495	6 ～ 16	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	18	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	6 ～ 500	5 ～ 500	0 ～ 495	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	6 ～ 500	-	6 ～ 500	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	6 ～ 500	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	-	-	5 ～ 500	0 ～ 495	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	6 ～ 500	-	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	6 ～ 500	-	-	10 ～ 500	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	5 ～ 500	0 ～ 495	6 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	6 ～ 500	-	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	20	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	5 ～ 500	0 ～ 495	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	8 ～ 500	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	8 ～ 500	-	8 ～ 500	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	8 ～ 500	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	-	-	-	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	8 ～ 500	-	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	-	10 ～ 500	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	8 ～ 500	-	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	25	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	-	8 ～ 500	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	8 ～ 500	-	8 ～ 500	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	-	-	10 ～ 500	8 ～ 500	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	-	-	-	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	8 ～ 500	-	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	8 ～ 500	-	-	10 ～ 500	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	-	-	7 ～ 500	0 ～ 494	8 ～ 500	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	8 ～ 500	-	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	30	Perpendicularity (0.2)	[Steel] 52100 Bearing Steel Equivalent	Induction Hardened	None	g6	25 ～ 500	With Cross-Drilled Hole	-	10 ～ 500	-	10 ～ 500	-	7 ～ 500	0 ～ 494	-	-	5 ～ 500
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Stainless Steel] SUS440C(13Cr) Stainless Steel Equivalent	Induction Hardened	None	g6	25 ～ 790	With Wrench Flats	-	-	-	-	6	5 ～ 18	-	6	0 ～ 782	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Stainless Steel] SUS440C(13Cr) Stainless Steel Equivalent	Induction Hardened	None	g6	25 ～ 790	With Wrench Flats	-	-	6	-	6	5 ～ 18	-	-	0 ～ 782	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Stainless Steel] SUS440C(13Cr) Stainless Steel Equivalent	Induction Hardened	None	g6	25 ～ 790	With Wrench Flats	6	-	-	-	-	5 ～ 18	-	6	0 ～ 782	5 ～ 18
1 Piece(s)	10 Days or more	10	8	Perpendicularity (0.2)	[Stainless Steel] SUS440C(13Cr) Stainless Steel Equivalent	Induction Hardened	None	g6	25 ～ 790	With Wrench Flats	6	-	6	-	-	5 ～ 18	-	-	0 ～ 782	5 ～ 18
1 Piece(s)	10 Days or more	10	10	Perpendicularity (0.2)	[Stainless Steel] SUS440C(13Cr) Stainless Steel Equivalent	Induction Hardened	None	g6	25 ～ 790	With Wrench Flats	-	-	-	-	6 ～ 8	5 ～ 24	-	6 ～ 8	0 ～ 782	5 ～ 24

More Information

[ ! ]Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm). >> Click here
[ ! ]Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
[ ! ]Circularity, Straightness, Perpendicularity Concentricity, Changes in Hardness >> Click here
[ ! ]Features of Low Temp. Black Chrome Plating
>> Click here

Example

Product TOP

Basic Information

Basic Shape	Both Ends Stepped	End Shape (Left)	Threaded	End Shape (Right)	Threaded

Configure

2,039 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Shaft Dia. D(mm)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
Clear
Material
- Steel
  - 1045 Carbon Steel
  - 52100 Bearing Steel Equivalent
- Stainless Steel
  - 304 Stainless Steel
  - SUS440C(13Cr) Stainless Steel Equivalent
Clear
Heat Treated
- Not Hardened
- Induction Hardened
Clear
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
Clear
Shaft Fits Tolerance
f8

g6

h5
Clear
Length L(mm)
[25-1490/1mm Unit(s)]
Clear
Tightening Tool Type
- With Wrench Flats
- With Cross-Drilled Hole
Clear
Change to Fine Threads [MMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change to Fine Threads [MMS](mm)
10

12

14

18

500
Clear
Change to Fine Threads [NMC](mm)
6

8

10

12

15

17

20

25

30

500
Clear
Change to Fine Threads [NMS](mm)
10

12

14

18

500
Clear
Coarse Thread [M](mm)
6

8

10

12

15

16

20

24

30

500
Clear
F(mm)
[5-500/1mm Unit(s)]
Clear
H(mm)
[0-496/1mm Unit(s)]
Clear
Coarse Tapped [N] Depth=Nx2(mm)
6

8

10

12

15

16

20

24

30

500
Clear
SC(mm)
[0-1475/1mm Unit(s)]
Clear
T(mm)
[5-500/1mm Unit(s)]
Clear
type
- PSAFU
- PSAGU
- PSFFU
- PSHAM
- PSHGM
- PSSAFU
- PSSAGU
- PSSFFU
- PSSHAM
- RSAFU
- RSHAM
- SAFU
- SFFU
- SFHAM
- SSAFU
- SSFFU
- SSHAM
- VAFU
- VPAFU
- VPSAFU
- VRFU
- VSAFU
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

10 Days or Less

12 Days or Less

15 Days or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Linear Ball Bushings - Single Type. LMU/SLMU Series.
MISUMI Days to Ship : Same day or more
Oil Free Bushings - Flanged, copper alloy.
MISUMI Days to Ship : Same day or more
Shaft Collars - Insert lock type, 2 holes.
MISUMI Days to Ship : 8 Days or more
Linear Ball Bushings - Bearing type, single/double.
MISUMI Days to Ship : 8 Days or more

Tech Support

Technical Support: Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com; Mon. - Fri. 8 a.m. - 6 p.m.; Technical Inquiry

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

Precision Linear Shafts - Both ends threaded, undercut, wrench flat / cross. (Part Numbers)

Specifications

Alterations

Part Number

More Information

Example

Basic Information

Configure

Specification/Dimensions

Shaft Dia. D(mm)

Shaft End Perpendicularity

Material

Heat Treated

Surface Finish

Shaft Fits Tolerance

Length L(mm)

Tightening Tool Type

Change to Fine Threads [MMC](mm)

Change to Fine Threads [MMS](mm)

Change to Fine Threads [NMC](mm)

Change to Fine Threads [NMS](mm)

Coarse Thread [M](mm)

F(mm)

H(mm)

Coarse Tapped [N] Depth=Nx2(mm)

SC(mm)

T(mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Tech Support

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)