(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Precision Linear Shafts - One end tapped with wrench flat / precision type.
- Lead Time Reduction
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One end Taped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 4mm - 50mm
[Length range]15mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |||||
| With Wrench Flats | With Cross-Drilled Hole | |||||||
| Precision Type | Standard | |||||||
| D Tol. g6 | D Tol. g6 | D Tol. h5 | D Tol. f8 | D Tol. g6 | D Tol. f8 | |||
| VFJC | SFJC | SFUC | - | SFHC | - | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC~ | - |
| VSFJC | SSFJC | SSFUC | - | SSFHC | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
| VPFJC | PSFJC | PSFUC | - | PSFHC | - | 52100 Bearing Steel Equivalent | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
| VPSFJC | PSSFJC | PSSFUC | - | PSSFHC | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
| VRJC | RSFJC | - | - | RSFHC | - | 52100 Bearing Steel Equivalent | Low Temp. Black Chrome Plating | |
| - | - | - | PSFGC | - | PSGHC | 1045 Carbon Steel | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
| - | - | - | PSSFGC | - | - | 304 Stainless Steel | ||
Specifications
| Part Number | - | L | - | M | - | SC | - | H |
| VFJC10 | - | 200 | - | M5 | - | SC6 | ||
| SFHC20 | - | 425 | - | M8 | - | H20 |
| D Tol. | |||
| D | g6 | h5 | f8 |
| 6 | -0.004 -0.012 | 0 -0.005 | -0.010 -0.028 |
| 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
| 10 | |||
| 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
| 13 | |||
| 15 | |||
| 16 | |||
| 18 | |||
| 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
| 25 | |||
| 30 | |||
| 35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
| 40 | |||
| 50 | |||
| Part Number | L 1mm Increment | M (Coarse Thread) | Wrench Flats Dimensions | C | |||||||||||
| Type | D | SC | W | ℓ1 | |||||||||||
| Precision Type (With Wrench Flats) (D Tolerance g6) VFJC VSFJC VPFJC VPSFJC VRJC | 6 | 25~350 | 3 | SC=1mm Increment [ ! ]SC+ℓ1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats Click here | 5 | 8 | 0.5 or Less | ||||||||
| 8 | 25~350 | 3 | 4 | 5 | 7 | ||||||||||
| 10 | 25~400 | 3 | 4 | 5 | 6 | 8 | |||||||||
| 12 | 25~400 | 4 | 5 | 6 | 8 | 10 | 10 | ||||||||
| 13 | 25~400 | 4 | 5 | 6 | 8 | 11 | |||||||||
| 15 | 25~400 | 4 | 5 | 6 | 8 | 10 | 13 | ||||||||
| 16 | 25~400 | 4 | 5 | 6 | 8 | 10 | 14 | ||||||||
| 18 | 25~400 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | |||||||
| 20 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 1.0 or Less | ||||||
| 25 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | ||||||
| 30 | 30~500 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||
| Part Number | L 1mm Increment | M (Coarse Thread) | Wrench Flats Dimensions | Cross-Drilled Hole Dimensions | C | ||||||||||||||||
| Type | D | SC | W | ℓ1 | H | d | |||||||||||||||
| Standard Type | 6 | 20~800 | 3 | SC=1mm Increment [ ! ]SC+ℓ1≤L [ ! ]SC≥0 [ ! ]Details of Wrench Flats Click here | 5 | 8 | - | - | 0.5 or Less | ||||||||||||
| (With Wrench Flats) (D Tolerance g6) SFJC SSFJC PSFJC PSSFJC RSFJC(D≤30, L≤500) (D Tolerance f8) PSFGC PSSFGC | (D Tolerance h5) SFUC SSFUC PSFUC PSSFUC | (With Cross-Drilled Hole) 8≤D≤30, L≤500 (D Tolerance g6) SFHC SSFHC PSFHC PSSFHC RSFHC (D Tolerance f8) PSGHC | 8 | 20~1000 | 3 | 4 | 5 | 7 | H=1mm Increment [ ! ]L≥H+d/2+2 [ ! ]H≥Mx2.5+d/2+6 | 3 | |||||||||||
| 10 | 20~1000 | 3 | 4 | 5 | 6 | 8 | |||||||||||||||
| 12 | 20~1200 | 4 | 5 | 6 | 8 | 10 | 10 | ||||||||||||||
| 13 | 25~1200 | 4 | 5 | 6 | 8 | 11 | 4 | ||||||||||||||
| 15 | 25~1200 | 4 | 5 | 6 | 8 | 10 | 13 | ||||||||||||||
| 16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 14 | ||||||||||||||
| 18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 6 | ||||||||||||
| 20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 17 | 1.0 or Less | ||||||||||||
| 25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | 7 | |||||||||||
| 30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||||
| 35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | 30 | - | - | |||||||||||
| 40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | ||||||||||||
| 50 | 65~1500 | 12 | 16 | 20 | 24 | 30 | 41 | ||||||||||||||
Alterations
Alteration Details >> Click here
For details, see Shaft Alteration Overview >> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
For details, see Shaft Alteration Overview >> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| PSFHC8-[20-500/1]-M[3,4,5]-H[0-496/1] |
| PSFHC10-[20-500/1]-M[3,4,5,6]-H[0-496/1] |
| PSFHC10-[20-500/1]-MD6-H[0-496/1] |
| PSFHC12-[20-500/1]-M[4,5,6,8]-H[0-496/1] |
| PSFHC12-[20-500/1]-MD[6,8]-H[0-496/1] |
| PSFHC12-[20-500/1]-MSC8-H[0-496/1] |
| PSFHC13-[25-500/1]-M[4,5,6,8]-H[0-496/1] |
| PSFHC13-[25-500/1]-MD[6,8]-H[0-496/1] |
| PSFHC13-[25-500/1]-MSC8-H[0-496/1] |
| PSFHC15-[25-500/1]-M[4,5,6,8,10]-H[0-496/1] |
| PSFHC15-[25-500/1]-MD[6,8,10]-H[0-496/1] |
| PSFHC15-[25-500/1]-MSC[8,10]-H[0-496/1] |
| PSFHC16-[30-500/1]-M[4,5,6,8,10]-H[0-496/1] |
| PSFHC16-[30-500/1]-MD[6,8,10]-H[0-496/1] |
| PSFHC16-[30-500/1]-MSC[8,10]-H[0-496/1] |
| PSFHC18-[30-500/1]-M[4,5,6,8,10,12]-H[0-495/1] |
| PSFHC18-[30-500/1]-MD[6,8,10,12]-H[0-495/1] |
| PSFHC18-[30-500/1]-MSC[8,10,12]-H[0-495/1] |
| PSFHC20-[30-500/1]-M[4,5,6,8,10,12]-H[0-495/1] |
| PSFHC20-[30-500/1]-MD[6,8,10,12]-H[0-495/1] |
| PSFHC20-[30-500/1]-MSC[8,10,12,14]-H[0-495/1] |
| PSFHC25-[35-500/1]-M[4,5,6,8,10,12,16]-H[0-494/1] |
| PSFHC25-[35-500/1]-MD[6,8,10,12,16]-H[0-494/1] |
| PSFHC25-[35-500/1]-MSC[8,10,12,14,18]-H[0-494/1] |
| PSFHC30-[35-500/1]-M[6,8,10,12,16,20]-H[0-494/1] |
| PSFHC30-[35-500/1]-MD[6,8,10,12,16,20]-H[0-494/1] |
| PSFHC30-[35-500/1]-MSC[8,10,12,14,18]-H[0-494/1] |
| PSGHC8-[20-500/1]-M[3,4,5]-H[0-496/1] |
| PSGHC10-[20-500/1]-M[3,4,5,6]-H[0-496/1] |
| PSGHC10-[20-500/1]-MD6-H[0-496/1] |
| PSGHC12-[20-500/1]-M[4,5,6,8]-H[0-496/1] |
| PSGHC12-[20-500/1]-MD[6,8]-H[0-496/1] |
| PSGHC12-[20-500/1]-MSC8-H[0-496/1] |
| PSGHC13-[25-500/1]-M[4,5,6,8]-H[0-496/1] |
| PSGHC13-[25-500/1]-MD[6,8]-H[0-496/1] |
| PSGHC13-[25-500/1]-MSC8-H[0-496/1] |
| PSGHC15-[25-500/1]-M[4,5,6,8,10]-H[0-496/1] |
| PSGHC15-[25-500/1]-MD[6,8,10]-H[0-496/1] |
| PSGHC15-[25-500/1]-MSC[8,10]-H[0-496/1] |
| PSGHC16-[30-500/1]-M[4,5,6,8,10]-H[0-496/1] |
| PSGHC16-[30-500/1]-MD[6,8,10]-H[0-496/1] |
| PSGHC16-[30-500/1]-MSC[8,10]-H[0-496/1] |
| PSGHC18-[30-500/1]-M[4,5,6,8,10,12]-H[0-495/1] |
| PSGHC18-[30-500/1]-MD[6,8,10,12]-H[0-495/1] |
| PSGHC18-[30-500/1]-MSC[8,10,12]-H[0-495/1] |
| PSGHC20-[30-500/1]-M[4,5,6,8,10,12]-H[0-495/1] |
| PSGHC20-[30-500/1]-MD[6,8,10,12]-H[0-495/1] |
| PSGHC20-[30-500/1]-MSC[8,10,12,14]-H[0-495/1] |
| PSGHC25-[35-500/1]-M[4,5,6,8,10,12,16]-H[0-494/1] |
| PSGHC25-[35-500/1]-MD[6,8,10,12,16]-H[0-494/1] |
| PSGHC25-[35-500/1]-MSC[8,10,12,14,18]-H[0-494/1] |
| PSGHC30-[35-500/1]-M[6,8,10,12,16,20]-H[0-494/1] |
| PSGHC30-[35-500/1]-MD[6,8,10,12,16,20]-H[0-494/1] |
| PSGHC30-[35-500/1]-MSC[8,10,12,14,18]-H[0-494/1] |
| PSSFHC8-[20-500/1]-M[3,4,5]-H[0-496/1] |
| PSSFHC10-[20-500/1]-M[3,4,5,6]-H[0-496/1] |
| PSSFHC10-[20-500/1]-MD6-H[0-496/1] |
| PSSFHC12-[20-500/1]-M[4,5,6,8]-H[0-496/1] |
| PSSFHC12-[20-500/1]-MD[6,8]-H[0-496/1] |
| PSSFHC12-[20-500/1]-MSC8-H[0-496/1] |
Loading...
More Information
Annealing may lower hardness at wrench flats, cross-drilled hole and shaft end machined areas (effective thread length + approx. 10mm).>> Click here
Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
Circularity, Straightness, Perpendicularity Concentricity, Changes in Hardness >> Click here
Shafts may have centering holes at end faces.
Features of Low Temp. Black Chrome Plating >> Click here
Cross-drilled hole areas may be out of O.D. tolerances due to annealing-induced deformation.
Circularity, Straightness, Perpendicularity Concentricity, Changes in Hardness >> Click here
Shafts may have centering holes at end faces.
Features of Low Temp. Black Chrome Plating >> Click here
Example
Basic Information
| Basic Shape | Straight | End Shape (Left) | Tapped | End Shape (Right) | No Machining |
|---|
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treated
- Not Hardened
- Induction Hardened
-
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
-
Shaft Fits Tolerance
-
Length L(mm)
-
Coarse Tapped [M] Depth=Mx2(mm)
-
Coarse Tapped [MD] Depth=Mx3(mm)
-
Fine Tapped [MSC] for M
-
H(mm)
-
SC(mm)
-
type
- PSFGC
- PSFHC
- PSFJC
- PSFUC
- PSGHC
- PSSFGC
- PSSFHC
- PSSFJC
- PSSFUC
- RSFHC
- RSFJC
- SFHC
- SFJC
- SFUC
- SSFHC
- SSFJC
- SSFUC
- VFJC
- VPFJC
- VPSFJC
- VRJC
- VSFJC
-
Tightening Tool Type
- With Wrench Flats
- With Cross-Drilled Hole
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Days or Less
- 7 Days or Less
- 9 Days or Less
- 10 Days or Less
- 12 Days or Less
- 15 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Precision Linear Shafts - Both ends male threaded, undercut.
- Precision Linear Shafts - One end stepped, male and female threaded ends.
- Precision Linear Shafts - One end female/ male threaded and hex socket type.
- Precision Linear Shafts - Straight (inches).
- Precision Linear Shafts - Female threaded end, male threaded end (inch).
- Precision Linear Shafts - Both ends stepped, female threaded end (inch).
- Precision Linear Shafts - Set screw groove, tapped or threaded end.
- Precision Linear Shafts - Straight, without machining, Thomson (inches).
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy