(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Precision Linear Shafts - One end female threaded.
- Lead Time Reduction
Case hardened stainless steel with low temp black chrome plating and 304 SS with hard chrome plating added as new. [3/31/2023]
One end Taped Precision Linear Shafts are available in 52100 Bearing Steel Equivalent and SUS440C(13Cr) Stainless Steel Equivalentand 1045 Carbon Steel Equivalentand 304 Stainless Steel, with the following options for Surface Treatment : Hard Chrome Plating / Low Temp. Black Chrome Plating or No Surface Treatment.And Shaft End Perpendicularity is selectable from 0.2 and 0.03.
[Diameter range] 4mm - 50mm
[Length range]20mm - 1500mm. Use the alteration LKC to specify the length in 0.1mm increment.
Inch option available, please click Here.
- METRIC
- inCAD Components
Part Number
Configured Part Number is shown.
・Materials
| Type | [ M ]Material | [ H ]Hardness | [ S ]Surface Treatment | |||
| Precision Type | Standard | |||||
| D Tol. g6 | D Tol. g6 | D Tol. h5 | D Tol. f8 | |||
| VFJT | SFJT | SFUT | - | 52100 Bearing Steel Equivalent | Effective Hardened Depth of Induction Hardened >>Click here 52100 Bearing Steel Equivalent 58HRC~ SUS440C(13Cr) Stainless Steel Equivalent 56HRC~ | - |
| VSFJT | SSFJT | SSFUT | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
| VPFJT | PSFJT | PSFUT | - | 52100 Bearing Steel Equivalent | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More | |
| VPSFJT | PSSFJT | PSSFUT | - | SUS440C(13Cr) Stainless Steel Equivalent | ||
| VRJT | RSFJT | - | - | 52100 Bearing Steel Equivalent | Low Temp. Black Chrome Plating | |
| - | - | - | PSFGT | 1045 Carbon Steel | - | Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More |
| - | - | - | PSSFGT | 304 Stainless Steel | ||
Specifications
| Part Number | - | L | - | M |
| VFJT8 | - | 200 | - | M4 |
| RSFJT20 | - | 325 | - | M8 |
| D Tol. | |||
| D | g6 | h5 | f8 |
| 4 | -0.004 -0.012 | 0 -0.005 | - |
| 5 | |||
| 6 | -0.010 -0.028 | ||
| 8 | -0.005 -0.014 | 0 -0.006 | -0.013 -0.035 |
| 10 | |||
| 12 | -0.006 -0.017 | 0 -0.008 | -0.016 -0.043 |
| 13 | |||
| 15 | |||
| 16 | |||
| 18 | |||
| 20 | -0.007 -0.020 | 0 -0.009 | -0.020 -0.053 |
| 25 | |||
| 30 | |||
| 35 | -0.009 -0.025 | 0 -0.011 | -0.025 -0.064 |
| 40 | |||
| 50 | |||
| Part Number | L 1mm Increment | M (Coarse Thread) | C | |||||||||||
| Type | D | |||||||||||||
| Precision Type (D Tolerance g6) VFJT VSFJT VPFJT VPSFJT VRJT | 4 | 25~200 | 2 | 0.2 or Less | ||||||||||
| 5 | 25~300 | 2.6 | 3 | |||||||||||
| 6 | 25~350 | 3 | 0.5 or Less | |||||||||||
| 8 | 25~350 | 3 | 4 | 5 | ||||||||||
| 10 | 25~400 | 3 | 4 | 5 | 6 | |||||||||
| 12 | 25~400 | 4 | 5 | 6 | 8 | |||||||||
| 13 | 25~400 | 4 | 5 | 6 | 8 | |||||||||
| 15 | 25~400 | 4 | 5 | 6 | 8 | 10 | ||||||||
| 16 | 25~400 | 4 | 5 | 6 | 8 | 10 | ||||||||
| 18 | 25~400 | 4 | 5 | 6 | 8 | 10 | 12 | |||||||
| 20 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 1.0 or Less | ||||||
| 25 | 30~500 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | ||||||
| 30 | 30~500 | 6 | 8 | 10 | 12 | 16 | 20 | |||||||
| Part Number | L 1mm Increment | M (Coarse Thread) | C | ||||||||||||||
| Type | D | ||||||||||||||||
| Standard Type (D Tolerance g6) SFJT SSFJT PSFJT PSSFJT RSFJT (D≤30, L≤500) (D Tolerance f8) PSFGT (D≥6) PSSFGT (D≥6) | (D Tolerance h5) SFUT SSFUT PSFUT PSSFUT | 4 | 20~ 300 | 2 | 0.2 or Less | ||||||||||||
| 5 | 20~ 400 | 2.6 | 3 | ||||||||||||||
| 6 | 20~ 800 | 3 | 0.5 or Less | ||||||||||||||
| 8 | 20~ 1000 | 3 | 4 | 5 | |||||||||||||
| 10 | 20~ 1000 | 3 | 4 | 5 | 6 | ||||||||||||
| 12 | 20~1200 | 4 | 5 | 6 | 8 | ||||||||||||
| 13 | 25~1200 | 4 | 5 | 6 | 8 | ||||||||||||
| 15 | 25~1200 | 4 | 5 | 6 | 8 | 10 | |||||||||||
| 16 | 30~1200 | 4 | 5 | 6 | 8 | 10 | |||||||||||
| 18 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | ||||||||||
| 20 | 30~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 1.0 or Less | |||||||||
| 25 | 35~1200 | 4 | 5 | 6 | 8 | 10 | 12 | 16 | |||||||||
| 30 | 35~1500 | 6 | 8 | 10 | 12 | 16 | 20 | ||||||||||
| 35 | 35~1500 | 8 | 10 | 12 | 16 | 20 | 24 | ||||||||||
| 40 | 50~1500 | 10 | 12 | 16 | 20 | 24 | 30 | ||||||||||
| 50 | 65~1500 | 12 | 16 | 20 | 24 | 30 | |||||||||||
Alterations
Alteration Details >> Click here
For details, seeShaft AlterationOverview>> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
For details, seeShaft AlterationOverview>> Click here
[ ! ]Please see Shaft Alteration Overview for details if provided. >> Click here
[ ! ]When selecting multiple alteration additions, the distance between machined areas should be greater than 2mm. >> Click here
[ ! ]Alterations may lower hardness. Please see >> Click here
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| VFJT4-[25-200/1]-M2 |
| VFJT5-[25-300/1]-M[2.6,3] |
| VFJT6-[25-300/1]-M3 |
| VFJT8-[25-300/1]-M[3,4,5] |
| VFJT10-[25-350/1]-M[3,4,5,6] |
| VFJT12-[25-350/1]-M[4,5,6,8] |
| VFJT12-[25-350/1]-MSC8 |
| VFJT13-[25-350/1]-M[4,5,6,8] |
| VFJT13-[25-350/1]-MD[6,8] |
| VFJT13-[25-350/1]-MSC8 |
| VFJT15-[25-350/1]-M[4,5,6,8,10] |
| VFJT15-[25-350/1]-MD[6,8,10] |
| VFJT15-[25-350/1]-MSC[8,10] |
| VFJT16-[25-350/1]-M[4,5,6,8,10] |
| VFJT16-[25-350/1]-MD[6,8,10] |
| VFJT16-[25-350/1]-MSC[8,10] |
| VFJT18-[25-350/1]-M[4,5,6,8,10,12] |
| VFJT18-[25-350/1]-MD[6,8,10,12] |
| VFJT18-[25-350/1]-MSC[8,10,12] |
| VFJT20-[30-450/1]-M[4,5,6,8,10,12] |
| VFJT20-[30-450/1]-MD[6,8,10,12] |
| VFJT20-[30-450/1]-MSC[8,10,12,14] |
| VFJT25-[30-450/1]-M[4,5,6,8,10,12,16] |
| VFJT25-[30-450/1]-MD[6,8,10,12,16] |
| VFJT25-[30-450/1]-MSC[8,10,12,14,18] |
| VFJT30-[30-450/1]-M[6,8,10,12,16,20] |
| VFJT30-[30-450/1]-MD[6,8,10,12,16,20] |
| VFJT30-[30-450/1]-MSC[8,10,12,14,18] |
| VPFJT4-[25-200/1]-M2 |
| VPFJT5-[25-300/1]-M[2.6,3] |
| VPFJT6-[25-300/1]-M3 |
| VPFJT8-[25-300/1]-M[3,4,5] |
| VPFJT10-[25-350/1]-M[3,4,5,6] |
| VPFJT12-[25-350/1]-M[4,5,6,8] |
| VPFJT12-[25-350/1]-MSC8 |
| VPFJT13-[25-350/1]-M[4,5,6,8] |
| VPFJT13-[25-350/1]-MD[6,8] |
| VPFJT13-[25-350/1]-MSC8 |
| VPFJT15-[25-350/1]-M[4,5,6,8,10] |
| VPFJT15-[25-350/1]-MD[6,8,10] |
| VPFJT15-[25-350/1]-MSC[8,10] |
| VPFJT16-[25-350/1]-M[4,5,6,8,10] |
| VPFJT16-[25-350/1]-MD[6,8,10] |
| VPFJT16-[25-350/1]-MSC[8,10] |
| VPFJT18-[25-350/1]-M[4,5,6,8,10,12] |
| VPFJT18-[25-350/1]-MD[6,8,10,12] |
| VPFJT18-[25-350/1]-MSC[8,10,12] |
| VPFJT20-[30-450/1]-M[4,5,6,8,10,12] |
| VPFJT20-[30-450/1]-MD[6,8,10,12] |
| VPFJT20-[30-450/1]-MSC[8,10,12,14] |
| VPFJT25-[30-450/1]-M[4,5,6,8,10,12,16] |
| VPFJT25-[30-450/1]-MD[6,8,10,12,16] |
| VPFJT25-[30-450/1]-MSC[8,10,12,14,18] |
| VPFJT30-[30-450/1]-M[6,8,10,12,16,20] |
| VPFJT30-[30-450/1]-MD[6,8,10,12,16,20] |
| VPFJT30-[30-450/1]-MSC[8,10,12,14,18] |
| VPSFJT4-[25-200/1]-M2 |
| VPSFJT5-[25-300/1]-M[2.6,3] |
| VPSFJT6-[25-300/1]-M3 |
| VPSFJT8-[25-300/1]-M[3,4,5] |
Loading...
More Information
Annealing may lower hardness at shaft end machined areas (effective thread length + approx. 10mm). >> Click here
Full Length Hardness Guaranteed Shafts >> Click here
Circularity, Straightness, Perpendicularity and Changes in Hardness >> Click here
Shafts may have centering holes at end faces.
Features of Low Temp. Black Chrome Plating >> Click here
Full Length Hardness Guaranteed Shafts >> Click here
Circularity, Straightness, Perpendicularity and Changes in Hardness >> Click here
Shafts may have centering holes at end faces.
Features of Low Temp. Black Chrome Plating >> Click here
Example
Basic Information
| Basic Shape | Straight | End Shape (Left) | Tapped | End Shape (Right) | No Machining |
|---|
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Material
- Steel
- Stainless Steel
- Steel
-
Heat Treated
- Not Hardened
-
Surface Finish
- None
- Hard Chrome
- Low Temperature Black Chrome
-
Shaft Fits Tolerance
-
Length L(mm)
-
Coarse Tapped [M] Depth=Mx2(mm)
-
Coarse Tapped [MD] Depth=Mx3(mm)
-
Fine Tapped [MSC] for M
-
type
- PSFGT
- PSFJT
- PSFUT
- PSSFGT
- PSSFJT
- PSSFUT
- RSFJT
- SFJT
- SFUT
- SSFJT
- SSFUT
- VFJT
- VPFJT
- VPSFJT
- VRJT
- VSFJT
-
Shaft End Perpendicularity
- Perpendicularity (0.2)
- Perpendicularity (0.03)
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Days or Less
- 7 Days or Less
- 8 Days or Less
- 9 Days or Less
- 10 Days or Less
- 11 Days or Less
- 12 Days or Less
- 15 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Precision Linear Shafts - One end tapped with wrench flat / precision type.
- Precision Linear Shafts - One end threaded, undercut, wrench flat/ cross drilled hole.
- Precision Linear Shafts - Both ends threaded with wrench flat/ cross.
- Precision Linear Shafts - Both ends stepped, tapped ends, wrench flat.
- Precision Linear Shafts - One end stepped, female threaded on one or both ends, wrench flats.
- Precision Linear Shafts - Female threaded end, male threaded end (inch).
- Precision Linear Shafts - Set screw groove, tapped or threaded end.
- Pre-Cut Straight Linear Shaft - Metric
Complementary Products
-
Shaft Supports - T-shape, slim body, with top groove. Shaft adjustment with screw.
MISUMI Days to Ship : Same day or more
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy