(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Swivel Eyebolts (Part Numbers)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
For complete product overview and details on Swivel Eyebolts see the sections below:
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
SLEBH48-42
(1)(2) 
SCM435(4137)(1.7220)
28~33HRC
Coating painting
(3) SCM435(4137)(1.7220)
32~39HRC
Black oxide film
(Strength rank 10.9)
SCM435(4137)(1.7220)
28~33HRC
Coating painting(3)
SCM435(4137)(1.7220) 32~39HRC Black oxide film(Strength rank 10.9)
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
Loading...
Specifications
| M×P (Coarse thread) | A | B | C | D | ℓ | b | h | H | E | W | k | (3)Socket head cap screw side | Indication of fastening torque for Socket head cap screw （Kgf・m） | Mass (kg) | Comparision on maximum allowance load N{kgf} | Part Number | ||||
| A: Vertical lifting (Single bolt use) | B: Side lifting (Two bolts use) | Type | M | |||||||||||||||||
| M 8×1.25 | 41 | 25 | 8 | 28 | 11 | 33 | 30 | 71 | 22 | 50 | 9.7 | 13 | 0.8～1.5 | 0.18 | 2940 | {300} | 2940 | {300} | SLEB | 8 |
| M10×1.5 | 16 | 32 | 31 | 12.7 | 17 | 1.0～2.5 | 0.19 | 4900 | {500} | 4900 | {500} | 10 | ||||||||
| M12×1.75 | 50 | 30 | 10 | 32 | 21 | 40 | 38 | 88 | 25 | 62 | 15 | 19 | 1.5～4.0 | 0.35 | 7850 | {800} | 7850 | {800} | 12 | |
| M16×2.0 | 65 | 37 | 14 | 42 | 27 | 47 | 48 | 109 | 32 | 79 | 18 | 24 | 4.0～10.0 | 0.75 | 15690 | {1600} | 15690 | {1600} | 16 | |
| M20×2.5 | 83 | 47 | 18 | 50 | 31 | 60 | 57 | 135 | 38 | 100 | 21 | 30 | 7.0～15.0 | 1.38 | 24520 | {2500} | 24520 | {2500} | 20 | |
| M24×3.0 | 102 | 58 | 22 | 60 | 37 | 72 | 63 | 157 | 48 | 121 | 24 | 36 | 10.0～25.0 | 2.38 | 35300 | {3600} | 35300 | {3600} | 24 | |
| M30×3.5 | 128 | 72 | 28 | 75 | 50 | 90 | 79 | 197 | 60 | 150 | 30 | 46 | 12.0～35.0 | 4.90 | 56870 | {5800} | 56870 | {5800} | 30 | |
| M36×4.0 | 154 | 90 | 32 | 90 | 57 | 112 | 91 | 235 | 70 | 176 | 34 | 55 | 15.0～50.0 | 7.60 | 78450 | {8000} | 78450 | {8000} | 36 | |
| M42×4.5 | 176 | 104 | 36 | 105 | 67 | 130 | 109 | 275 | 80 | 200 | 42 | 65 | 18.0～60.0 | 11.80 | 98060 | {10000} | 98060 | {10000} | 42 | |
More Information
•Swivel Lifting Eye Bolt is available to rotate 360° against the heavy lift shaft. Also, available to rotate 180° against the lifting direction.
•Can safely use Swivel Lifting Eye Bolt even when the lifting work from side direction, beveled direction or under tensile condition which are dangerous with the conventional eye bolt of CHI.
•Compared with CHI, Swivel Lifting Eye Bolt has approx. three times allowance load with same bolt size. Available to use at small place by changing screw diameter M and outer dimension W smaller.
Refet to the following table■Comparision on maximum allowance load
| Bolt size | Maximum allowance load N (kgf) | |||
| Eyebolts (CHI) | Swivel eyebolts (SLEB) | |||
| M 8 | 785 | {80} | 2940 | {300} |
| M10 | 1471 | {150} | 4900 | {500} |
| M12 | 2157 | {220} | 7850 | {800} |
| M16 | 4413 | {450} | 15690 | {1600} |
| M20 | 6178 | {630} | 24520 | {2500} |
| M24 | 9316 | {950} | 35300 | {3600} |
| M30 | 14710 | {1500} | 56870 | {5800} |
| M36 | 22555 | {2300} | 78450 | {8000} |
| M42 | 33342 | {3400} | 98060 | {10000} |
| No. | Item name | | | |
| (1) | Shackle | SCM435 | 28~33HRC | Coating painting |
| (2) | Turnnion | SCM435 | 28~33HRC | Coating painting |
| (3) | Socket head cap screw | SCM435 | 32~39HRC (Strength rank 10.9) | Black oxide film |
| (4) | Spacer cap | S45C | 24~28HRC | Trivalent Chromate |
| (5) | Steel ball | SUJ2 | 60~62HRC | − |
| (6) | Button bolt | SCM435 | 39~45HRC | Black oxide film |
| (7) | Round washer | SS400 | − | Parkerizing |
| (8) | Hollow spacer | S45C | 24~28HRC | Trivalent Chromate |
For burning prevention, wipe off the screw part from the dirt and dust and install after lubrication when possible.
| ■Guide for installation • Sit flange on the wider surface area than swivel lifting eye bolt and fasten bolts with right torque. Note: Refer to the above table on fastening torque indication.• After installing swivel lifting eye bolt, need to verify if the shackle moves at 360°against the lift shaft and 180°against the lifting direction. ■Guide for lifting work • As the shackle is designed for longitudinal load, do not directly hook larger bolt than inner diameter of the shackle. • When using two or more eye bolts, need attention on the loading displacement to single eye bolt depending on the lift angle. • This item has rotating function for changing lifting direction, however, do NOT continuously rotate eye bolt in loading condition. • Sudden lifting work is dangerous. Lift carefully with slow in lifting speed. (Impact shock may be a cause of bolt or other parts damage) ■Guide for maintenance • Make regular check-up on the change in shape and cracking according to the load working condition and operation frequency. Note: Use at ordinary temperature below 40°C. |  | ||
 Do not hook in side load against the shackle. | Make sure not to contact the lifting material and the shackle. | ||
| Absolutely refrain from installing thick washer in between eye bolt flange and lifting material due to sharp decline in allowable lifting load. | |||
Please check the type/dimensions/specifications of the part SLEBH48-42 in the Swivel Eyebolts series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| SLEB12 |
| SLEB16 |
| SLEB20 |
| SLEB24 |
| SLEB30 |
| SLEBH64-48 |
Additional Products in this Category
- Dowel Pins -Straight/Tapped h7 Type-
- Dowel Pins (Package Products) -Tapped h7 Type-
- Distance Spacers
- Name Plates For Plastic Molds
- Shot Counters For Plastic Molds
- Distance Spacers
- Holding Plates For Pin
- Cycle Counter
Complementary Products
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy